REFERENCES
- Bailey , M. W. and Cameron , A. ( 1973 ), “ The Effects of Temperature and Metal Pairs On Scuffing ,” ASLE Trans. , 16 , p 121 .
- Cheng , H. S. ( 1967 ), “ Calculations of Elastohydrodynamic Film Thickness in High Speed Rolling and Sliding Contacts ,” Mechanical Technology, Inc. Technical Report , MTI-67TR24.
- Czichos , H. ( 1974 ), “ Failure Modes of Sliding Lubricated Concentrated Contacts ,” Wear , 28 , pp 95 – 101
- Czichos , H. and Kirschke , K. ( 1972 ), “ Investigations Into Film Failure (Transition Point) of Lubricated Concentrated Contacts ,” Wear , 22 , pp 321 – 336
- Ehret , P. , et al. ( 1998 ), “ On Lubricant Transport Conditions in Elastohydrodynamic Conjunctions,” in Proc. Roy. Soc. Lond. , A454 , pp 763 – 787
- Johnson , K. L. and Tevaarwerk , J. L. ( 1977 ), “ Shear Behavior of Elastohydrodynamic Oil Films,” in Proc. Roy. Soc. Lond. , 356 , A, pp 215 – 236
- Johnston , G. J. , Wayte , R. and Spikes , H. A. ( 1991 ), “ The Measurement and Study of Very Thin Lubricant Film in Concentrated Contacts ,” Trib. Trans. , 34 , pp 187 – 194
- Kancta , M. , et al. ( 1996 ), “ Abnormal Phenomena Appearing in EHL contacts ,” ASME Jour. of Trib. , 118 , pp 886 – 892
- Kaneta , M. , et al. ( 1992 ), “ Effects of Elastic Moduli of Contact Surfaces in Elastohydrodynamic Lubrication ,” ASME Jour, of Trib. , 114 , pp 75 – 80
- Kannel , J. W. and Bell , J. C. ( 1971 ), “ Interpretations of the Thickness of Lubricant Films in Rolling Contact: Part I—Examination of Measurements Obtained by X-Rays ,” ASME Jour. of Lubri. Tech. , pp 478 – 484
- Lee , D. , Sanborn , D. M. and Winer , W. O. ( 1973 ), “ Some Observations of the Relationship Between Film Thickness and Load in High Hertz Pressure Sliding Elastohydrodynamic Contacts ,” ASME Jour, of Lubr. Tech. , 95 , pp 386 – 390
- Paul , G. R. and Cameron , A. ( 1979 ), “ The Ultimate Shear Stress of Fluids at High Pressures Measured By a Modified Impact Microviscometer,” in Proc. Roy. Soc. Lond. , A365 , pp 31 – 41
- Rozeanu , L. ( 1980 ), “ Slippage Phenomena At the Interface Between the Absorbed Layer and the Bulk of the Lubricant: Theory and Experiment ,” Wear , 64 , pp 245 – 257
- Rozeanu , L. and Snarsky , L. ( 1978 ), “ Effect of Solid Surface Lubricant Interaction on the Load Carrying Capacity of Sliding Bearings ,” ASME Jour, of Lubr. Tech. , 100 , pp 167 – 175
- Tichy , J. A. ( 1995 ), “ Modeling of Thin Film Lubrication ,” Trib. Trans. , 38 , pp 108 – 118
- Wen , S. Z. and Yang , P. ( 1990 ), Elastohydrodynamic Lubrication (in Chinese) , Tsinghua Press , Beijing , P. R. of China .
- Wen , S. Z. and Zhang , Y. B. ( 2000 ), “ EHL Performance of the Lubricant with Shear Strength: Part I-Boundary Slippage and Film Failure ,” Trib. Trans. , 43 , 4 , pp 700 – 710
- Yang , P. , et al. ( 2001 ), “ Formation of Steady Dimples in Point TEHL Contacts ,” ASME Jour. of Trib. , 123 , pp 42 – 49
- Zhang , Y. B. and Wen , S. Z. ( 1998 ), “ Prevention of Film Slippage in Isothermal Pure Rolling Line Contact EHL Under Heavy Load ,” ASME Jour, of Trib. , 1060 P/al.
- Zhang , Y. B. and Wen , S. Z. ( 2002a ), “ An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part 1-Theory and Solutions ,” Trib. Trans. , 45 , 2 , pp 135 – 144
- Zhang , Y. B. and Wen , S. Z. ( 2002b ), “ An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part II- Load Influence ,” Trib. Trans. , 45 , 2 , pp 211 – 216