Mass Conserving Cavitation Effects in Squeeze-Film Journal Bearings Subjected to Sinusoidal Loads

REFERENCES

• Booker , J. F. , Goenka , P. K. and van Leeuwen , H. J. 1982 . “Dynamic Analysis of Rocking Journal Bearings with Multiple Offset Segments,” . Journal of Lubrication Technology , 104 : 478 – 490 .
   Google Scholar
• Booker , J. F. and Boedo , S. 2007 . “Spherical vs. Cylindrical Engine Bearings,” . Proceedings of the 2007 STLE/ASME International Joint Tribology Conference , : 425 – 427 . 22–24 October 2007, San Diego, CA, Paper IJTC2007-44448
   Google Scholar
• Boedo , S. and Booker , J. F. 2009 . “Dynamics of Offset Bearings–Revisited,” . Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology , 223 : 359 – 369 . 606-607
   Google Scholar
• Burwell , J. T. 1951 . “The Calculated Performance of Dynamically Loaded Sleeve Bearings—III,” . Journal of Applied Mechanics , 18 : 393 – 404 .
   Google Scholar
• LaBouff , G. A. and Booker , J. F. 1985 . “Dynamically Loaded Journal Bearings: A Finite Element Treatment for Rigid and Elastic Surfaces,” . Journal of Tribology , 107 : 505 – 515 .
   Web of Science ®Google Scholar
• Hays , D. F. 1961 . “Squeeze Films: A Finite Journal Bearing with a Fluctuating Load,” . Journal of Basic Engineering , 83 : 579 – 588 .
   Google Scholar
• Booker , J. F. 1965 . “Dynamically Loaded Journal Bearings: Mobility Method of Solution,” . Journal of Basic Engineering , 87 : 537 – 546 .
   Web of Science ®Google Scholar
• Donaldson , R. R. 1971 . “Minimum Squeeze Film Thickness in a Periodically Loaded Journal Bearing,” . Journal of Lubrication Technology , 93 : 130 – 132 .
   Google Scholar
• Elrod , H. G. 1981 . “A Cavitation Algorithm,” . Journal of Lubrication Technology , 103 : 350 – 354 .
   Web of Science ®Google Scholar
• Kumar , A. and Booker , J. F. 1991 . “A Finite Element Cavitation Algorithm,” . Journal of Tribology , 113 : 276 – 286 .
   Web of Science ®Google Scholar
• Phelan , R. M. 1961 . “Nonrotating Journal Bearings under Sinusoidal Loads,” . ASME Paper 61-LubS-6
   Google Scholar
• Ku , C.-P. and Tichy , J. A. 1990 . “An Experimental and Theoretical Study of Cavitation in a Finite Submerged Squeeze Film Damper,” . Journal of Tribology , 112 : 725 – 733 .
   Web of Science ®Google Scholar
• Diaz , S. E. and San Andrés , L. 2001 . “A Model for Squeeze Film Dampers Operating with Air Entrainment and Validation with Experiments,” . Journal of Tribology , 123 : 125 – 133 .
   Web of Science ®Google Scholar
• Jang , J. Y. and Khonsari , M. M. 2008 . “Linear Squeeze Film with Constant Rotational Speed,” . Tribology Transactions , 51 : 361 – 371 .
   Web of Science ®Google Scholar
• Booker , J. F. and Huebner , K. H. 1972 . “Application of Finite Elements to Lubrication: An Engineering Approach,” . Journal of Lubrication Technology , 94 : 313 – 323 . Errata: 98, p 39
   Web of Science ®Google Scholar
• Booker , J. F. and Boedo , S. 2001 . “Finite Element Analysis of Elastic Engine Bearing Lubrication: Theory,” . Revue Européenne des Éléments Finis , 10 : 705 – 724 .
   Google Scholar
• Boedo , S. and Booker , J. F. 2001 . “Finite Element Analysis of Elastic Engine Bearing Lubrication: Application,” . Revue Européenne des Éléments Finis , 10 : 725 – 740 .
   Google Scholar
• Li , X. and Taylor , D. L. 1987 . “Nonsynchronous Motion of Squeeze Film Damper Systems,” . Journal of Tribology , 109 : 169 – 176 .
   Google Scholar
• Boedo , S. and Booker , J. F. 1997 . “Surface Roughness and Structural Inertia in a Mode-Based Mass-Conserving Elastohydrodynamic Lubrication Model,” . Journal of Tribology , 119 : 449 – 455 .
   Web of Science ®Google Scholar
• Phelan , R. M. 1950 . The Design and Development of a Machine for the Experimental Investigation of Dynamically Loaded Sleeve Bearings , Ithaca, NY : M.S. thesis, Cornell University .
   Google Scholar
• Smith , W. L. 1955 . Experimental Investigations of Dynamically Loaded Sleeve Bearings with No Shaft Rotation , Ithaca, NY : M.S. thesis, Cornell University .
   Google Scholar
• Goenka , P. K. 1984 . “Analytical Curve Fits for Solution Parameters of Dynamically Loaded Journal Bearings,” . Journal of Tribology , 106 : 421 – 428 .
   Web of Science ®Google Scholar
• Della Pietra , L. and Adiletta , G. 2002 . “The Squeeze Film Damper over Four Decades of Investigations: Part I: Characteristics and Operating Features,” . Shock and Vibration Digest , 34 : 3 – 26 .
   Google Scholar
• Della Pietra , L. and Adiletta , G. 2002 . “The Squeeze Film Damper over Four Decades of Investigations: Part II: Rotordynamic Analyses with Rigid and Flexible Rotors,” . Shock and Vibration Digest , 34 : 97 – 126 .
   Google Scholar
• San Andrés , , L. and Diaz , S. E. 2003 . “Flow Visualization and Forces from a Squeeze Film Damper Operating with Natural Air Entrainment,” . Journal of Tribology , 125 : 325 – 333 .
   Web of Science ®Google Scholar
• Hays , D. F. and Feiten , J. B. 1964 . “Cavities between Moving Parallel Plates,” . In Cavitation in Real Liquids , Edited by: Davies , R. 122 – 137 . New York : Elsevier .
   Google Scholar
• Boedo , S. and Booker , J. F. 1995 . “Cavitation in Normal Separation of Square and Circular Plates,” . Journal of Tribology , 117 : 403 – 410 .
   Web of Science ®Google Scholar
• Parkins , D. W. and May-Miller , R. 1984 . “Cavitation in an Oscillating Oil Squeeze Film,” . Journal of Tribology , 104 : 497 – 503 .
   Google Scholar
• Parkins , D. W. and Woollam , J. H. 1986 . “Behavior of an Oscillating Oil Squeeze Film,” . Journal of Tribology , 106 : 360
   Google Scholar