Numerical Modeling of Wear Damage in Seals of a Wave Energy Converter with Hydraulic Power Take-Off under Random Loads

REFERENCES

• Falnes , J. 2002 . Ocean Waves and Oscillating Systems: Linear Interactions Including Wave-Energy Extraction , Cambridge, , UK : Cambridge University Press .
   Google Scholar
• Eidsmoen , H. 1995 . On the Theory and Simulation of Heaving-Buoy Wave-Energy Converters with Control , Trondheim, , Norway : Ph.D. thesis, Division of Physics, Norwegian Institute of Technology .
   Google Scholar
• de O. Falcão , A. F. 2007 . “Modelling and Control of Oscillating-Body Wave Energy Converters with Hydraulic Power Take-Off and Gas Accumulator,” . Ocean Engineering , 34 : 2021 – 2032 .
   Google Scholar
• Yang , L. M. , Hals , J. and Moan , T. 2009 . “A Wear Model for Assessing the Reliability of Wave Energy Converter in Heave with Hydraulic Power Take-Off,” . Proceedings of the 8th European Wave and Tidal Energy Conference , : 874 – 881 . September 7–10, 2009, Uppsala, Sweden
   Google Scholar
• Yang , L. M. , Hals , J. and Moan , T. 2010 . “Analysis of Dynamic Effects Relevant for the Wear Damage in Hydraulic Machines for Wave Energy Conversion,” . Ocean Engineering , 37 : 1089 – 1102 .
   Google Scholar
• Peterson , M. B. and Winer , W. O. 1980 . Wear Control Handbook , New York : American Society of Mechanical Engineers .
   Google Scholar
• Dahlheimer , J. C. 1972 . Mechanical Face Seal Handbook , New York : Chilton .
   Google Scholar
• Becker , E. P. and Ludema , K. C. 1999 . “A Qualitative Empirical Model of Cylinder Bore Wear, Part I,” . Wear , 225–229 : 387 – 404 .
   Google Scholar
• Müller , H. K. and Nau , B. S. 1998 . Fluid Sealing Technology: Principles and Applications , New York : Marcel Dekker .
   Google Scholar
• Rabinowicz , E. 1995 . Friction and Wear of Materials , 2nd ed. , New York : John Wiley & Sons .
   Google Scholar
• Tung , S. and Huang , Y. 2004 . “Modeling of Abrasive Wear in a Piston Ring and Engine Cylinder Bore System,” . Tribology Transactions , 47 : 17 – 22 .
   Web of Science ®Google Scholar
• Burr , B. H. 1982 . “An Equation for the Abrasive Wear of Elastomeric O-Ring Materials,” . Wear , 81 : 347 – 356 .
   Google Scholar
• Gangopadhyay , A. 2000 . “Development of a Piston Ring-Cylinder Bore Wear Model,” . SAE Paper No. 2000-01-1788
   Google Scholar
• King , R. B. and Lancaster , J. K. 1980 . “Wear of Metals by Elastomers in an Abrasive Environment,” . Wear , 61 ( 2 ) : 341 – 352 .
   Google Scholar
• Sin , H. , Saka , N. and Suh , N. P. 1979 . “Abrasive Wear Mechanisms and the Grid Size Effect,” . Wear , 55 : 163 – 190 .
   Web of Science ®Google Scholar
• Hokkirigawa , K. and Kato , K. 1988 . “An Experimental and Theoretical Investigation of Ploughing, Cutting and Wedge Formation during Abrasive Wear,” . Tribology International , 21 ( 1 ) : 51 – 57 .
   Web of Science ®Google Scholar
• Rabinowicz , E. 1976 . “Wear,” . Materials Science and Engineering , 25 : 23 – 28 .
   Google Scholar
• Williams , J. A. and Hyncica , A. M. 1992 . “Mechanisms of Abrasive Wear in Lubricated Contacts,” . Wear , 152 : 57 – 74 .
   Web of Science ®Google Scholar
• Kramer , B. M. 1986 . “Predicted Wear Resistances of Binary Carbide Coatings,” . Journal of Vacuum Science and Technology A , 4 ( 6 ) : 2870 – 2873 .
   Google Scholar
• Patir , N. and Cheng , H. 1978 . “An Average Model for Determining Effects of Three-Dimensional Roughness on Hydrodynamic Lubrication,” . Journal of Lubrication Technology , 100 : 12 – 17 .
   Web of Science ®Google Scholar
• Patir , N. and Cheng , H. 1979 . “Application of Average Flow Model to Lubrication Between Rough Sliding Bearings,” . Journal of Lubrication Technology , 101 : 220 – 230 .
   Web of Science ®Google Scholar
• Truhan , J. J. , Qu , J. and Blau , P. J. 2005 . “The Effect of Lubricating Oil Condition on the Friction and Wear of Piston Ring and Cylinder Liner Materials in a Reciprocating Bench Test,” . Wear , 259 : 1048 – 1055 .
   Web of Science ®Google Scholar
• Sätra , S. A. 2005 . Wear of Piston Rings in Hydrostatic Transmissions , Stockholm, , Sweden : Ph.D. thesis, Trita-MMK-2005 .
   Google Scholar
• Fang , L. , Liu , W. , Du , D. , Zhang , X. and Xue , Q. 2004 . “Predicting Three-Body Abrasive Wear Using Monte Carlo Methods,” . Wear , 256 : 685 – 694 .
   Web of Science ®Google Scholar
• Bayer , R. G. 2004 . Mechanical Wear Fundamentals and Testing , New York : Marcel Dekker .
   Google Scholar
• Visscher , M. , Dowson , D. and Taylor , C. M. 1998 . “The Profile Development of a Twin-Land Oil-Control Ring during Running-In,” . Journal of Tribology , 120 ( 4 ) : 616 – 621 .
   Google Scholar
• Hamrock , B. J. , Schmid , S. R. and Jacobson , B. O. 2004 . Fundamentals of Fluid Film Lubrication , 2nd ed. , New York : Marcel Dekker .
   Google Scholar
• Nikas , G. K. 2003 . “Elastohydrodynamics and Mechanics of Rectangular Elastomeric Seals for Reciprocating Piston Rods,” . Journal of Tribology , 125 ( 1 ) : 60 – 69 .
   Web of Science ®Google Scholar
• Delaune , X. , de Langre , E. and Phalippou , C. 2000 . “A Probabilistic Approach to the Dynamics of Wear Tests,” . Journal of Tribology , 122 : 815 – 821 .
   Google Scholar
• Williams , J. A. 2005 . “Wear and Wear Particles—Some Fundamentals,” . Tribology International , 38 : 863 – 870 .
   Web of Science ®Google Scholar
• Haver , S. and Nyhus , K. A. 1986 . “A Wave Climate Description for Long Term Response Calculations,” . In Proceedings of the 9th International Conference on Offshore Mechanics and Arctic Engineering Vol. 4 , 27 – 34 . Tokyo, , Japan April 13–18, 1986
   Google Scholar
• Faltinsen , O. M. 1990 . Sea Loads on Ships and Offshore Structures , Cambridge, , UK : Cambridge University Press .
   Google Scholar
• Moan , T. , Gao , Z. and Ayala-Uraga , E. 2005 . “Uncertainty of Wave-Induced Response of Marine Structures due to Long-Term Variation of Extratropical Wave Conditions,” . Marine Structures , 18 ( 4 ) : 359 – 382 .
   Web of Science ®Google Scholar