Analysis of Sliding Wear Characteristics of BFS Filled Composites Using an Experimental Design Approach Integrated with ANN

REFERENCES

• Lancaster , J. K. 1989 . “ Composites for Aerospace Dry Bearing Application ” . In Friction and Wear of Polymer Composites , Composite Materials Series Edited by: Friedrich , K. Vol. 1 , 363 – 396 . New York : VCH Publishers .
   Google Scholar
• Briscoe , B. J. 1993 . “ The Tribology of Composite Materials: A Preface ” . In Advances in Composite Tribology , Composite Materials Series Edited by: Friedrich , K. Vol. 8 , 3 – 15 . The Netherlands : Elsevier .
   Google Scholar
• Friedrich , K. 1997 . Wear Performance of High Temperature Polymers and Their Composites . Application of High Temperature Polymers , 2 : 221 – 246 .
   Google Scholar
• Stachowiak , G. W. and Batchelor , A. W. 2001 . Engineering Tribology , 2nd ed. , Oxford , , UK : Butterworth-Heinemann .
   Google Scholar
• Katz , H. S. and Mileski , J. V. 1987 . Handbook of Fillers for Plastics , New York : Von Nostrand Reinhold .
   Google Scholar
• Jiang , Z. , Lada , A. G. , Alois , K. S. , Klaus , F. and Zhang , Z. 2008 . Study on Friction and Wear Behavior of Polyphenylene Sulfide Composites Reinforced by Short Carbon Fibers and Sub-Micro TiO2 Particles . Composites Science and Technology , 68 : 734 – 742 .
   Web of Science ®Google Scholar
• Chang , L. , Zhang , Z. , Breidt , C. and Friedrich , K. 2005 . Tribological Properties of Epoxy Nanocomposites I. Enhancement of the Wear Resistance by Nano-TiO2 Particles . Wear , 258 : 141 – 148 .
   Web of Science ®Google Scholar
• Satapathy , A. and Patnaik , A. 2008 . Analysis of Dry Sliding Wear Behavior of Red Mud Filled Polyester Composites Using the Taguchi Method . Journal of Reinforced Plastics and Composites , 29 : 2883 – 2897 .
   Web of Science ®Google Scholar
• Jang , B. Z. 1994 . Advanced Polymer Composites: Principles and Applications , ASM International .
   Google Scholar
• Jung-il , K. , Kang , P. H. and Nho , Y. C. 2004 . Positive Temperature Coefficient Behavior of Polymer Composites Having a High Melting Temperature . Journal of Applied Polymer Science , 92 : 394 – 401 .
   Web of Science ®Google Scholar
• Patnaik , A. , Satapathy , A. , Mahapatra , S. S. and Dash , R. R. 2009 . Modeling and Prediction of Erosion Response of Glass Reinforced Polyester–Flyash Composites . Journal of Reinforced Plastics and Composites , 28 : 513 – 536 .
   Web of Science ®Google Scholar
• Patnaik , A. , Satapathy , A. , Mahapatra , S. S. and Dash , R. R. 2008 . Parametric Optimization of Erosion Wear of Polyester–GF–Alumina Hybrid Composites Using Taguchi Method . Journal of Reinforced Plastics and Composites , 27 : 1039 – 1058 .
   Web of Science ®Google Scholar
• Cirino , M. , Friedrich , K. and Pipes , R. B. 1987 . The Abrasive Wear Behaviour of Continuous Fibre Polymer Composites . Journal of Materials Science , 22 : 2481 – 2492 .
   Web of Science ®Google Scholar
• Friedrich , K. , Karger-Kocsis , J. and Lu , Z. 1991 . Effects of Counterpart Roughness and Temperature on Friction and Wear of PEEK Composites . Wear , 148 : 235 – 247 .
   Web of Science ®Google Scholar
• Friedrich , K. , Lu , Z. and Hager , A. M. 1993 . Overview on Polymer Composites for Friction and Wear Application . Theoretical and Applied Fracture Mechanics , 19 : 1 – 11 .
   Web of Science ®Google Scholar
• Briscoe , B. J. , Yao , L. H. and Stolarski , T. A. 1985 . “ The Friction and Wear of PTFE and PEEK Composites: An Initial Appraisal of the Optimum Composition ” . In Proceedings of the International Conference on Wear of Materials , Edited by: Ludema , K. C. 725 – 741 . American Society of Mechanical Engineers: London .
   Google Scholar
• Kadi , H. E. 2006 . Modeling the Mechanical Behavior of Fiber-Reinforced Polymeric Composite Materials Using Artificial Neural Networks—A Review . Composite Structures , 73 ( 1 ) : 1 – 23 .
   Web of Science ®Google Scholar
• Velten , K. , Reinicke , R. and Friedrich , K. 2000 . Wear Volume Prediction with Artificial Neural Networks . Tribology International , 33 : 731 – 736 .
   Web of Science ®Google Scholar
• Zhang , Z. and Friedrich , K. 2003 . Artificial Neural Networks Applied to Polymer Composites: A Review . Composites Science and Technology , 63 : 2029 – 2044 .
   Web of Science ®Google Scholar
• Jiang , Z. , Zhang , Z. and Friedrich , K. 2007 . Prediction on Wear Properties of Polymer Composites with Artificial Neural Network . Composites Science and Technology , 67 : 168 – 176 .
   Web of Science ®Google Scholar
• Gyurova , L. A. 2010 . Sliding Friction and Wear of Polyphenylene Sulfide Matrix Composites: Experimental and Artificial Neural Network Approach , Kaiserslautern , , Germany : Ph.D. Thesis, Institut fuer Verbundwerkstoffe GmbH .
   Google Scholar
• Rajeev , V. R. , Dwivedi , D. K. and Jain , S. C. 2010 . Dry Reciprocating Wear of Al-Si-SiCp Composites: A Statistical Analysis . Tribology International , 43 : 1532 – 1541 .
   Web of Science ®Google Scholar
• Mahapatra , S. S. , Patnaik , A. and Satapathy , A. 2008 . A Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-Reinforced Polyester Composites . Wear , 265 : 214 – 222 .
   Web of Science ®Google Scholar
• Taguchi , G. and Konishi , S. 1987 . Taguchi Methods: Orthogonal Arrays and Linear Graphs , Dearborn , MI : American Supplier Institute .
   Google Scholar
• Taguchi , G. 1990 . Introduction to Quality Engineering , Tokyo : Asian Productivity Organization .
   Google Scholar
• Sahu , S. P. , Satapathy , A. , Mishra , D. , Patnaik , A. and Sreekumar , K. P. 2010 . Tribo-Performance Analysis of Fly Ash–Aluminum Coatings Using Experimental Design and ANN . Tribology Transactions , 53 : 533 – 542 .
   Web of Science ®Google Scholar
• Mishra , S. C. , Das , S. , Satapathy , A. , Ananthapadmanabhan , P. V. and Sreekumar , K. P. 2009 . Erosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Technique . Tribology Transactions , 52 : 401 – 404 .
   Web of Science ®Google Scholar
• Oliver , G. , Buchanan , V. and Cooke , K. 2007 . A Tribological Study for an Increased Coefficient of Friction in the Extraction of Sugarcane Juice . Tribology Transactions , 50 : 198 – 204 .
   Web of Science ®Google Scholar
• Peng , D.-X. 2012 . Optimization of Welding Parameters on Wear Performance of Cladded Layer with TiC Ceramic via a Taguchi Approach . Tribology Transactions , 55 : 122 – 129 .
   Web of Science ®Google Scholar
• Phadke , M. S. 1989 . Quality Engineering Using Robust Design , Englewood Cliffs , NJ : Prentice-Hall .
   Google Scholar
• Wu , Y. and Moore , W. H. 1986 . Quality Engineering: Product & Process Design Optimization , Dearborn , MI : American Supplier Institute .
   Google Scholar
• Logothetis , N. and Haigh , A. 1987 . A Hierarchical Method for Evaluating Products with Quantitative and Sensory Characteristics . IIE Transactions , 33 ( 12 ) : 1081 – 1092 .
   Google Scholar
• Logothetis , N. and Haigh , A. 1988 . Characterizing and Optimizing Multi-Response Processes by the Taguchi Method . Quality and Reliability Engineering International , 4 : 159 – 169 .
   Google Scholar
• Shoemaker , A. C. and Kackar , R. N. 1988 . A Methodology for Planning Experiments in Robust Product and Process . Quality and Reliability Engineering International , 4 : 95 – 103 .
   Google Scholar
• Phadke , M. S. and Dehnad , K. 1988 . Optimization of Product and Process Design for Quality and Cost . Quality and Reliability Engineering International , 4 : 105 – 112 .
   Google Scholar
• El-Tayeb , N. S. and Gadelrab , R. M. 1996 . Friction and Wear Properties of E-Glass Fibre Reinforced Epoxy Composites under Different Sliding Contact Conditions . Wear , 192 : 112 – 117 .
   Web of Science ®Google Scholar