Multipass Sliding Wear Behavior of TiAlN Coatings Using a Spherical Indenter: Effect of Coating Parameters and Duplex Treatment

REFERENCES

• Åstrand , M. , Selinder , T. I. and Sjöstrand , M. E. 2005 . Deposition of Ti1−xAlxN Using Bipolar Pulsed Dual Magnetron Sputtering . Surface and Coatings Technology , 200 : 625 – 629 .
   Web of Science ®Google Scholar
• PalDey , S. and Deevi , S. C. 2003 . Single Layer and Multilayer Wear Resistant Coatings of (Ti,Al)N: A Review . Materials Science and Engineering A , 342 : 58 – 79 .
   Web of Science ®Google Scholar
• Hsieh , J. H. , Liang , C. , Yu , C. H. and Wu , W. 1998 . Deposition and Characterization of TiAlN and Multi-Layered TiN/TiAlN Coatings Using Unbalanced Magnetron Sputtering . Surface and Coatings Technology , 108–109 : 132 – 137 .
   Web of Science ®Google Scholar
• Raveh , A. , Weiss , M. , Pinkas , M. , Rosen , D. Z. and Kimmel , G. 1999 . Graded Al-AlN, TiN, and TiAlN Multilayers Deposited by Radio-Frequency Reactive Magnetron Sputtering . Surface and Coatings Technology , 114 : 269 – 277 .
   Web of Science ®Google Scholar
• Khrais , S. K. and Lin , Y. J. 2007 . Wear Mechanisms and Tool Performance of TiAlN PVD Coated Inserts During Machining of AISI 4140 Steel . Wear , 262 : 64 – 69 .
   Web of Science ®Google Scholar
• Santana , A. E. , Karimi , A. , Derflinger , V. H. and Schütze , A. 2004 . Microstructure and Mechanical Behavior of TiAlCrN Multilayer Thin Films . Surface and Coatings Technology , 177–178 : 334 – 340 .
   Web of Science ®Google Scholar
• Wadsworth , I. , Smith , I. J. , Donohue , L. A. and Münz , W.-D. 1997 . Thermal Stability and Oxidation Resistance of TiAlN/CrN Multilayer Coatings . Surface and Coatings Technology , 94–95 : 315 – 321 .
   Web of Science ®Google Scholar
• Salas , O. , Kearns , K. , Carrera , S. and Moore , J. J. 2003 . Tribological Behavior of Candidate Coatings for Al Die Casting Dies . Surface and Coatings Technology , 172 : 117 – 127 .
   Web of Science ®Google Scholar
• Panjan , P. , Bončina , I. , Bevk , J. and Čekada , M. 2005 . PVD Hard Coatings Applied for the Wear Protection of Drawing Dies . Surface and Coatings Technology , 200 : 133 – 136 .
   Web of Science ®Google Scholar
• Quesada , F. , Mariño , A. and Restrepo , E. 2006 . TiAlN Coatings Deposited by R.F. Magnetron Sputtering on Previously Treated ASTM A36 Steel . Surface and Coatings Technology , 201 : 2925 – 2929 .
   Web of Science ®Google Scholar
• Thobor , A. , Rousselot , C. , Clement , C. , Takadoum , J. , Martin , N. , Sanjines , R. and Levy , F. 2000 . Enhancement of Mechanical Properties of TiN/AlN Multilayers by Modifying the Number and the Quality of Interfaces . Surface and Coatings Technology , 124 : 210 – 221 .
   Web of Science ®Google Scholar
• Hovsepian , P. Eh. , Lewis , D. B. , Luo , Q. , Münz , W.-D. , Mayrhofer , P. H. , Mitterer , C. , Zhou , Z. and Rainforth , W. M. 2005 . TiAlN Based Nanoscale Multilayer Coatings Designed to Adapt Their Tribological Properties at Elevated Temperatures . Thin Solid Films , 485 : 160 – 168 .
   Web of Science ®Google Scholar
• Manaila , R. , Devenyi , A. , Biro , D. , David , L. , Barna , P. B. and Kovacs , A. 2002 . Multilayer TiAlN Coatings with Composition Gradient . Surface and Coatings Technology , 151–152 : 21 – 25 .
   Web of Science ®Google Scholar
• Tönshoff , K. , Karpuschewski , B. , Mohlfeld , A. , Leyendecker , T. , Erkens , G. , Fuß , H. G. and Wenke , R. 1998 . Performance of Oxygen-Rich TiALON Coatings in Dry Cutting Applications . Surface and Coatings Technology , 108–109 : 535 – 542 .
   Web of Science ®Google Scholar
• Derflinger , V. H. , Schütze , A. and Ante , M. 2006 . Mechanical and Structural Properties of Various Alloyed TiAlN-Based Hard Coatings . Surface and Coatings Technology , 200 : 4693 – 4700 .
   Web of Science ®Google Scholar
• Tentardini , E. K. , Aguzzoli , C. , Castro , M. , Kunrath , A. O. , Moore , J. J. , Kwietniewski , C. and Baumvol , I. J. R. 2008 . Reactivity between Aluminum and (Ti,Al)N Coatings for Casting Dies . Thin Solid Films , 516 : 3062 – 3069 .
   Web of Science ®Google Scholar
• Jeong , J. J. , Hwang , S. K. and Lee , C. M. 2002 . Nitrogen Flow Rate Dependence of the Growth Morphology of TiAlN Films Deposited by Reactive Sputtering . Surface and Coatings Technology , 151–152 : 82 – 85 .
   Web of Science ®Google Scholar
• Ramana , J. V. , Kumar , S. , David , C. and Raju , V. S. 2004 . Structure, Composition and Microhardness of (Ti,Zr)N and (Ti,Al)N Coatings Prepared by DC Magnetron Sputtering . Materials Letters , 58 : 2553 – 2558 .
   Web of Science ®Google Scholar
• Oliveira , J. C. , Manaia , A. , Cavaleiro , A. and Vieira , M. T. 2006 . Structure, Hardness and Thermal Stability of Ti(Al,N) Coatings . Surface and Coatings Technology , 201 : 4073 – 4077 .
   Web of Science ®Google Scholar
• Oliveira , J. C. , Manaia , A. , Dias , J. P. , Cavaleiro , A. , Teer , D. and Taylor , S. 2006 . The Structure and Hardness of Magnetron Sputtered Ti-Al-N Thin Films with Low N Contents (<42 at.%) . Surface and Coatings Technology , 200 : 6583 – 6587 .
   Web of Science ®Google Scholar
• Wuhrer , R. and Yeung , W. Y. 2003 . Effect of Target–Substrate Working Distance on Magnetron Sputter Deposition of Nanostructured Titanium Aluminium Nitride Coatings . Scripta Materialia , 49 : 199 – 205 .
   Web of Science ®Google Scholar
• Barshilia , H. C. , Yogesh , K. and Rajam , K. S. 2009 . Deposition of TiAlN Coatings Using Reactive Bipolar-Pulsed Direct Current Unbalanced Magnetron Sputtering . Vacuum , 83 : 427 – 434 .
   Web of Science ®Google Scholar
• Ahlgren , M. and Blomqvist , H. 2005 . Influence of Bias Variation on Residual Stress and Texture in TiAlN PVD Coatings . Surface and Coatings Technology , 200 : 157 – 160 .
   Web of Science ®Google Scholar
• Zywitzki , O. , Klostermann , H. , Fietzke , F. and Modes , T. 2006 . Structure of Superhard Nanocrystalline (Ti,Al)N Layers Deposited by Reactive Pulsed Magnetron Sputtering . Surface and Coatings Technology , 200 : 6522 – 6526 .
   Web of Science ®Google Scholar
• You , Y. Z. and Kim , D. 2007 . Influence of Incidence Angle and Distance on the Structure of Aluminium Nitride Films Prepared by Reactive Magnetron Sputtering . Thin Solid Films , 515 : 2860 – 2863 .
   Web of Science ®Google Scholar
• Chen , L. , Moser , M. , Du , Y. and Mayrhofer , P. H. 2009 . Compositional and Structural Evolution of Sputtered Ti-Al-N . Thin Solid Films , 517 : 6635 – 6641 .
   Web of Science ®Google Scholar
• Björk , T. , Westergård , R. and Hogmark , S. 2001 . Wear of Surface Treated Dies for Aluminium Extrusion—A Case Study . Wear , 249 : 316 – 323 .
   Web of Science ®Google Scholar
• Rodríguez-Baracaldo , R. , Benito , J. A. , Puchi-Cabrera , E. S. and Staia , M. H. 2007 . High Temperature Wear Resistance of (TiAl)N PVD Coating on Untreated and Gas Nitrided AISI H13 Steel with Different Heat Treatments . Wear , 262 : 380 – 389 .
   Web of Science ®Google Scholar
• Navinšek , B. , Panjan , P. , Urankar , I. , Cvahte , P. and Gorenjak , F. 2001 . Improvement of Hot-Working Processes with PVD Coatings and Duplex Treatment . Surface and Coatings Technology , 142–144 : 1148 – 1154 .
   Web of Science ®Google Scholar
• Müller , K. B. 2002 . Deposition of Hard Films on Hot-Working Steel Dies for Aluminium . Journal of Materials Processing Technology , 130–131 : 432 – 437 .
   Web of Science ®Google Scholar
• Klimek , K. S. , Ahn , H. , Seebach , I. , Wang , M. and Rie , K.-T. 2003 . Duplex Process Applied for Die-Casting and Forging Tools . Surface and Coatings Technology , 174–175 : 677 – 680 .
   Web of Science ®Google Scholar
• Cooke , K. E. , Yang , S. , Selcuk , C. , Kennedy , A. , Teer , D. G. and Beale , D. 2004 . Development of Duplex Nitrided and Closed Field Unbalanced Magnetron Sputter Ion Plated CrTiAlN-based Coatings for H13 Aluminium Extrusion Dies . Surface and Coatings Technology , 188–189 : 697 – 702 .
   Web of Science ®Google Scholar
• Björk , T. , Westergård , R. , Hogmark , S. , Bergström , J. and Hedenqvist , P. 1999 . Physical Vapour Deposition Duplex Coatings for Aluminium Extrusion Dies . Wear , 225–229 : 1123 – 1130 .
   Web of Science ®Google Scholar
• Luo , Q. , Hovsepian , P. Eh. , Lewis , D. B. , Münz , W.-D. , Kok , Y. N. , Cockrem , J. , Bolton , M. and Farinotti , A. 2005 . Tribological Properties of Unbalanced Magnetron Sputtered Nano-Scale Multilayer Coatings TiAlN/VN and TiAlCrYN Deposited on Plasma Nitrided Steels . Surface and Coatings Technology , 193 : 39 – 45 .
   Web of Science ®Google Scholar
• Kamminga , J.-D. , Alkemade , P. F. A. and Janssen , G. C. A. M. 2004 . Scratch Test Analysis of Coated and Uncoated Nitrided Steel . Surface and Coatings Technology , 177–178 : 284 – 288 .
   Web of Science ®Google Scholar
• Ezugwu , E. O. and Okeke , C. I. 2000 . Effects of Coating Materials on the Machinability of a Nickel Base, C-263, Alloy . Tribology Transactions , 43 ( 3 ) : 549 – 553 .
   Web of Science ®Google Scholar
• Ezugwu , E. O. and Okeke , C. I. 2002 . Behavior of Coated Carbide Tools in High Speed Machining of a Nickel Base Alloy . Tribology Transactions , 45 ( 1 ) : 122 – 126 .
   Web of Science ®Google Scholar
• Danisman , K. , Danisman , S. , Savas , S. and Dalkiran , I. 2009 . Modelling of the Hysteresis Effect of Target Voltage in Reactive Magnetron Sputtering Process by Using Neural Networks . Surface and Coatings Technology , 204 ( 5 ) : 610 – 614 .
   Web of Science ®Google Scholar
• Oliver , W. C. and Pharr , G. M. 1992 . An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments . Journal of Materials Research , 7 ( 6 ) : 1564 – 1583 .
   Web of Science ®Google Scholar
• Leyland , A. and Matthews , A. 2000 . On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimised Tribological Behaviour . Wear , 246 : 1 – 11 .
   Web of Science ®Google Scholar
• Yu , D. , Wanga , C. , Cheng , X. and Zhang , F. 2008 . Optimization of Hybrid PVD Process of TiAlN Coatings by Taguchi Method . Applied Surface Science , 255 : 1865 – 1869 .
   Web of Science ®Google Scholar
• Gottipati , R. and Mishra , S. 2010 . Process Optimization of Adsorption of Cr(VI) on Activated Carbons Prepared from Plant Precursors by a Two-Level Full Factorial Design . Chemical Engineering Journal , 160 : 99 – 107 .
   Web of Science ®Google Scholar
• Pfeiler , M. , Kutschej , K. , Penoy , M. , Michotte , C. , Mitterer , C. and Kathrein , M. 2007 . The Influence of Bias Voltage on Structure and Mechanical/Tribological Properties of Arc Evaporated Ti-Al-V-N Coatings . Surface and Coatings Technology , 202 : 1050 – 1054 .
   Web of Science ®Google Scholar
• Efeoğlu , İ. 2005 . Co-Sputtered Mo:S:C:Ti:B Based Coating for Tribological Applications . Surface and Coatings Technology , 200 : 1724 – 1730 .
   Web of Science ®Google Scholar
• Ronkainen , H. , Laukkanen , A. and Holmberg , K. 2007 . Friction in a Coated Surface Deformed by a Sliding Sphere . Wear , 263 : 1315 – 1323 .
   Web of Science ®Google Scholar
• Srinivasan , A. and Viraraghavan , T. 2010 . Oil Removal from Water by Fungal Biomass: A Factorial Design Analysis . Journal of Hazardous Materials , 175 : 695 – 702 .
   PubMed Web of Science ®Google Scholar
• Antony , J. 2003 . Design of Experiments for Engineers and Scientists , Burlington , MA : Butterworth-Heinemann .
   Google Scholar
• Mezlini , S. , Kapsa , Ph. , Abry , J. C. , Henon , C. and Guillemenet , J. 2006 . Effect of Indenter Geometry and Relationship Between Abrasive Wear and Hardness in Early Stage of Repetitive Sliding . Wear , 260 : 412 – 421 .
   Web of Science ®Google Scholar