REFERENCES
- Jeng , Y. 1992 . Theoretical Analysis of Piston-Ring Lubrication: Part I—Fully Flooded Lubrication . Tribology Transactions , 35 : 696 – 706 .
- Taylor , C. M. 1993 . Engine Tribology , Netherlands : Elsevier Science .
- Hu , Y. , Cheng , H. S. , Arai , T. , Kobayashi , Y. and Aoyama , S. 1994 . Numerical Simulation of Piston Ring in Mixed Lubrication—A Nonaxisymmetrical Analysis . Journal of Tribology , 116 : 470 – 478 .
- Han , D. C. and Lee , J. S. 1998 . Analysis of the Piston Ring Lubrication with the New Boundary Condition . Tribology International , 31 ( 12 ) : 753 – 760 .
- Chong , W. W. F. , Teodorescu , M. and Vaughan , N. D. 2011 . Cavitation Induced Starvation for Piston-Ring/Liner Tribological Conjunction . Tribology International , 44 : 483 – 497 .
- Patir , N. and Cheng , H. S. 1978 . An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication . Journal of Lubrication Technology , 100 : 12 – 17 .
- Patir , N. and Cheng , H. S . 1979 . Application of Average Flow Model to Lubrication between Rough Sliding Surfaces . Journal of Lubrication Technology , 101 : 220 – 230 .
- Akalin , O. and Newaz , G. M. 2001 . Piston Ring–Cylinder Bore Friction Modeling in Mixed Lubrication Regime: Part I—Analytical Results . Journal of Tribology , 123 : 211 – 218 .
- Ji-Young , K. , Jee-Woon , K. , Myung-Rae , C. and Dong-Chul , H. 2002 . Friction Characteristics of Piston Ring Pack with Consideration of Mixed Lubrication: Parametric Investigation . KSME International Journal , 16 : 468 – 475 .
- Meng , F. M. , Wang , W. Z. and Hu , Y. Z. Numerical Analysis of Combined Influence of Inter-Asperity Cavitation and Elastic Deformation on Flow Factors . Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science , Vol. 221 , pp. 815 – 827 .
- Meng , F. M. , Cen , S. Q. , Hu , Y. Z. and Wang , H. 2009 . On Elastic Deformation, Inter-Asperity Cavitation and Lubrication Thermal Effects on Flow Factors . Tribology International , 42 : 260 – 274 .
- Jagadeesha , K. M. , Nagaraju , T. , Sharma , S. C. and Jain , S. C. 2012 . 3D Surface Roughness Effects on Transient Non-Newtonian Response of Dynamically Loaded Journal Bearings . Tribology Transactions , 55 : 32 – 42 .
- Jakobsson , B. and Floberg , L. 1957 . The Finite Journal Bearing Considering Vaporization , Vol. 190 , 1 – 116 . Charmers Tekniska Hoegskolas Handlingar .
- Olsson , K. O. 1965 . Cavitation in Dynamically Loaded Bearings , Chalmers University of Technology, Goteborg .
- Elrod , H. G. and Adams , M. L. 1976 . “ Computer Program for Cavitation and Starvation Problems ” . In Proceedings of 1st Leeds–Lyon Symposium on Tribology: Cavitation and Related Phenomena in Lubrication , 37 – 41 . New York : Mechanical Engineering Publications .
- Vijayaraghavan , D. 1989 . New Concept in Numerical Prediction of Cavitation in Bearing , The University of Toledo, USA . Ph.D. Thesis
- Vijayaraghavan , D. and Keith , T. G. Jr. 1989 . Development and Evaluation of a Cavitation Algorithm . Tribology Transactions , 32 : 225 – 233 .
- Jeng , Y. 1992 . Theoretical Analysis of Piston-Ring Lubrication: Part I—Fully Flooded Lubrication . Tribology Transactions , 35 : 696 – 706 .
- Jeng , Y. 1992 . Theoretical Analysis of Piston-Ring Lubrication: Part II—Starved Lubrication and Its Application to a Complete Ring Pack . Tribology Transactions , 35 : 707 – 714 .
- Yang , Q. and Keith , T. G. 1995 . An Elastohydrodynamic Cavitation Algorithm for Piston Ring Lubrication . Tribology Transactions , 38 : 97 – 107 .
- Payvar , P. and Salant , R. F. 1992 . A Computational Method for Cavitation in a Wavy Mechanical Seal . Journal of Tribology , 114 : 198 – 204 .
- Priest , M. , Dowson , D. and Taylor , C. M. 2000 . Theoretical Modelling of Cavitation in Piston Ring Lubrication . Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science , 214 ( 3 ) : 435 – 447 .
- Dellis , P. and Arcoumanis , C. 2004 . Cavitation Development in the Lubricant Film of a Reciprocating Piston-Ring Assembly . Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology , 218 ( 3 ) : 157 – 171 .
- Harp , S. R. and Salant , R. F. 2001 . An Average Flow Model of Rough Surface Lubrication with Inter-Asperity Cavitation . Journal of Tribology , 123 : 134 – 143 .
- Harp , S. R. 2000 . A Computational Method for Evaluating Cavitating Flow between Rough Surfaces , Georgia Institute of Technology, USA . Ph.D. Thesis
- Wang , Y. , Jane Wang , Q. and Lin , C. 2006 . A Mixed-EHL Analysis of Effects of Misalignments and Elastic Deformations on the Performance of a Coupled Journal–Thrust Bearing System . Tribology International , 39 : 281 – 289 .
- Chen , H. 2008 . Modeling of Liner Finish Effects on Oil Control Ring Lubrication in Internal Combustion Engines Based on Deterministic Method , Massachusetts Institute of Technology, USA . Ph.D. Thesis
- Li , Y. 2011 . Multiphase Oil Transport at Complex Micro Geometry , Massachusetts Institute of Technology, USA . Ph.D. Thesis
- Yang , L. 1992 . Friction Modelling for Internal Combustion Engines , UK : University of Leeds . Ph.D. Thesis
- Ye , X. , Chen , G. , Luo , M. and Jiang , Y. K. 2003 . “ Three-Dimensional Analysis of Tribological Performance and Heat Transfer in Piston and Cylinder Liner System ” . In Fall Technical Conference of the ASME Internal Combustion Engine Division Erie , , PA
- Wu , C. W. and Zheng , L. Q. 1989 . An Average Reynolds Equation Lubrication with a Contact Factor for Partial Film . Journal of Tribology , 111 : 188 – 191 .
- Wannatong , K. , Chanchaona , S. and Sanitjai , S. 2008 . Simulation Algorithm for Piston Ring Dynamics . Simulation Modelling Practice and Theory , 16 : 127 – 146 .
- Huijie , X. 2005 . Predictive Modeling of Piston Assembly Lubrication in Reciprocating Internal Combustion Engines , Ph.D. Thesis, The University of Texas at Austin .
- Greenwood , J. A. and Tripp , J. H. 1971 . The Contact of Two Nominally Flat Rough Surfaces . Proceedings of the Institution of Mechanical Engineers , 185 : 625 – 633 .