Microstructure and Wear Resistance of Fe-Cr-C Hardfacing Alloy Reinforced by Titanium Carbonitride

REFERENCES

• Stevenson, A. N. J. and Hutchings, I. M. (1995), “Wear of Hardfacing White Cast Irons by Solid Particle Erosion,” Wear, 186, pp 150–158.
   Web of Science ®Google Scholar
• Cardoso, P. H. S., Israel, C. L., and Strohaecker, T. R. (2014), “Abrasive Wear in Austempered Ductile Irons: A Comparison with White Cast Irons,” Wear, 313(1), pp 29–33.
   Web of Science ®Google Scholar
• Rynio, C., Hattendorf, H., Klöwer, J., and Eggeler, G. (2014), “The Evolution of Tribolayers during High Temperature Sliding Wear,” Wear, 315(1), pp 1–10.
   Web of Science ®Google Scholar
• Pascual, M., Cembrero, J., Salas, F., and Martínez, M. P. (2008), “Analysis of the Weldability of Ductile Iron,” Materials Letters, 62(8), pp 1359–1362.
   Web of Science ®Google Scholar
• Zhang, G., Wu, C. S., and Liu, Z. (2014), “Experimental Observation of Both Keyhole and Its Surrounding Thermal Field in Plasma Arc Welding,” International Journal of Heat and Mass Transfer, 70, pp 439–448.
   Web of Science ®Google Scholar
• Arif, N. and Chung, H. (2014), “Alternating Current-Gas Metal Arc Welding for Application to Thin Sheets,” Journal of Materials Processing Technology, 214(9), pp 1828–1837.
   Web of Science ®Google Scholar
• Feng, J., Li, L., Chen, Y., Lei, Z., Qin, H., and Li, Y. (2012), “Effects of Welding Velocity on the Impact Behavior of Droplets in Gas Metal Arc Welding,” Journal of Materials Processing Technology, 212(11), pp 2163–2172.
   Web of Science ®Google Scholar
• Dwivedi, D. K. (2004), “Abrasive Wear Behavious of Iron Based Hard Surfacing Alloy Coatings Developed by Welding,” Surface Engineering, 20(2), pp 87–92.
   Web of Science ®Google Scholar
• Wang, X., Han, F., Liu, X., Qu, S., and Zou, Z. (2008), “Microstructure and Wear Properties of the Fe-Ti-V-Mo-C Hardfacing Alloy,” Wear, 265(5), pp 583–589.
   Web of Science ®Google Scholar
• Liu, D. S., Liu, R. P., Wei, Y. H., Qiu, Y., Pan, P., Zhu, K., and Gao, W. L. (2012), “Comparative Behaviour of Cobalt and Iron Base Hardfacing Alloys,” Surface Engineering, 28(5), pp 338–344.
   Web of Science ®Google Scholar
• Kiran, D. V., Cho, D. W., Song, W. H., and Na, S. J. (2014), “Arc Behavior in Two Wire Tandem Submerged Arc Welding,” Journal of Materials Processing Technology, 214(8), pp 1546–1556.
   Web of Science ®Google Scholar
• Savaş, S. and Danişman, Ş. (2014), “Multipass Sliding Wear Behavior of TiAlN Coatings Using a Spherical Indenter: Effect of Coating Parameters and Duplex Treatment,” Tribology Transactions, 57(2), pp 242–255.
   Web of Science ®Google Scholar
• Deng, W., Gao, X., Zhao, D., Du, L., Wu, D., and Wang, G. (2010), “Effect of Ti-Enriched Carbonitride on Microstructure and Mechanical Properties of X80 Pipeline Steel,” Journal of Materials Science and Technology, 26(9), pp 803–809.
   Web of Science ®Google Scholar
• Yang, K., Yang, Q., and Bao, Y. (2013), “Effect of Carbonitride Precipitates on the Solid/Liquid Erosion Behaviour of Hardfacing Alloy,” Applied Surface Science, 284, pp 540–544.
   Web of Science ®Google Scholar
• Deng, Y., Yu, S., Xing, S., Huang, L., and Lu, Y. (2011), “Abrasive Resistance of Arc Sprayed Carbonitride Alloying Self-Shielded Coatings,” Applied Surface Science, 258(1), pp 382–387.
   Web of Science ®Google Scholar
• Liu, Y. F., Mu, J. S., Xu, X. Y., and Yang, S. Z. (2007), “Microstructure and Dry-Sliding Wear Properties of TiC-Reinforced Composite Coating Prepared by Plasma-Transferred Arc Weld-Surfacing Process,” Materials Science and Engineering A, 458(1), pp 366–370.
   Web of Science ®Google Scholar
• Escobedo, J., Méndez, J., Cortés, D., Gómez, J., Méndez, M., and Mancha, H. (1996), “Effect of Nitrogen on the Microstructure and Mechanical Properties of a Co-Cr-Mo Alloy,” Materials and Design, 17(2), pp 79–83.
   Web of Science ®Google Scholar
• Çalişkan, H., Panjan, P., and Paskvale, S. (2014), “Monitoring of Wear Characteristics of TiN and TiAlN Coatings at Long Sliding Distances,” Tribology Transactions, 57(3), pp 496–502.
   Web of Science ®Google Scholar
• Enjo, T., Kikuchi, Y., and Nagata, H. (1980), “Gas Shielded Arc Welding of High-Nitrogen Austenitic Stainless Steel,” Transactions of JWRI (Joining and Welding Research Institute of Osaka University), 2, pp 173–180.
   Google Scholar
• Sanz, A. (2004), “New Coatings for Continuous Casting Rolls,” Surface and Coatings Technology, 177, pp 1–11.
   Web of Science ®Google Scholar
• Lin, Y. C. and Wang, S. W. (2003), “Wear Behavior of Ceramic Powder Cladding on an S50C Steel Surface,” Tribology International, 36(1), pp 1–9.
   Web of Science ®Google Scholar
• Peng, D. X. (2012), “Optimization of Welding Parameters on Wear Performance of Cladded Layer with TiC Ceramic via a Taguchi Approach,” Tribology Transactions, 55(1), pp 122–129.
   Web of Science ®Google Scholar
• Correa, E. O., Alcantara, N. G., Tecco, D. G., and Kumar, R. V. (2007), “Development of an Iron-Based Hardfacing Material Reinforced with Fe-(TiW) C Composite Powder,” Metallurgical and Materials Transactions A, 38(5), pp 937–945.
   Web of Science ®Google Scholar
• Shimoyama, I., Baba, Y., and Sekiguchi, T. (2014), “A Polarization Rule on Atomic Arrangements of Graphite-Like Boron Carbonitride,” Carbon, 71, pp 1–10.
   Web of Science ®Google Scholar
• Yoo, H. K., Kwon, W. T., and Kang, S. (2014), “Development of a New Electrode for Micro-Electrical Discharge Machining (EDM) Using Ti (C, N)-Based Cermet,” International Journal of Precision Engineering and Manufacturing, 15(4), pp 609–616.
   Web of Science ®Google Scholar
• Berns, H. and Fischer, A. (1997), “Microstructure of Fe-Cr-C Hardfacing Alloys with Additions of Nb, Ti and, B,” Materials Characterization, 39(2), pp 499–527.
   Web of Science ®Google Scholar
• Kumar, N., Das, C. R., Dash, S., Albert, S. K., Chandramohan, P., Srinivasan, M. P., and Raj, B. (2012), “Tribo-Induced Phase Transformation and Associated Evolution of Friction of NiCrB Alloy,” Tribology Transactions, 55(1), pp 117–121.
   Web of Science ®Google Scholar
• Zhou, Y. F., Yang, Y. L., Yang, J., Zhang, P. F., Qi, X. W., Ren, X. J., and Yang, Q. X. (2013), “Wear Resistance of Hypereutectic Fe-Cr-C Hardfacing Coatings with in situ Formed TiC,” Surface Engineering, 29(5), pp 366–373.
   Web of Science ®Google Scholar