REFERENCES
- Vengudusamy, B., Grafl, A., Novotny-Farkas, F., and Schöfmann, W. (2014), “Influence of Surface Roughness on The tribological Properties of Gear Oils in Steel/Steel Contacts: Part I—Boundary Friction Properties,” Tribology Transactions, 57, pp 256–266.
- Britton, R.D., Elcoate, C.D., Alanou, M.P., Evan, H.P., and Snidle, R.W. (1999), “Effect of Surface Finish on Gear Tooth Friction,” Journal of Tribology, 122, pp 354–360.
- Jeng, Y.-R. (1990), “Experimental Study of the Effects of Surface Roughness on Friction,” Tribology Transactions, 33, pp 402–410.
- Cassin, G., Heinrich, E., and Spikes, H.A. (2001), “The Influence of Surface Roughness on the Lubrication Properties of Adsorbing and Non-Adsorbing Biopolymers,” Tribology Letters, 11, pp 95–102.
- Greaves, M. (2012), “Pressure Viscosity Coefficients and Traction Properties of Synthetic Lubricants for Wind Turbine Gear Systems,” Lubrication Science, 24, pp 75–83.
- Gunsel, S., Korcek, S., Smeeth, M., and Spikes, H.A. (1999), “The Elastohydrodynamic Friction and Film Forming Properties of Lubricant Base Oils,” Tribology Transactions, 42(3), pp 559–569.
- Vengudusamy, B., Grafl, A., Novotny-Farkas, F., and Schöfmann, W. (2013), “Comparison of Frictional Properties of Gear Oils in Boundary and Mixed Lubricated Rolling–Sliding and Pure Sliding Contacts,” Tribology International, 62, pp 100–109.
- Jao, T.C., Inacker, O., Beckmann, P., and Yatsunami, K. (2007), “Effects of Viscosity and Surface Roughness on Gear Contact Tribological Layers,” Lubrication Science, 19, pp 57–70.
- Topolovec-Miklozic, K., Reg Forbus, T., and Spikes, H.A. (2007), “Performance of Friction Modifiers on ZDDP-Generated Surfaces,” Tribology Transactions, 50, pp 328–335.
- Hamrock, B.J. and Dowson, D. (1977), “Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results,” Journal of Lubrication Technology, 99, pp 264–276.
- Hamrock, B.J. (1994), Fundamentals of Fluid Film Lubrication, 2nd ed., McGraw Hill, New York.
- Spikes, H.A. (1997), “Mixed Lubrication—An Overview,” Lubrication Science, 9, pp 221–253.
- Brandao, J.A., Meheux, M., Ville, F., Seabra, J., and Castro, J. (2012), “Comparative Overview of Five Gear Oils in Mixed and Boundary Film Lubrication,” Tribology International, 47, pp 50–61.
- Blau, P. J. (2003), “Transient Scuffing of Candidate Diesel Engine Materials at Temperatures Up to 600°C”, ORNL/TM-2003-/142. Available at: http://web.ornl.gov/webworks/cppr/y2001/rpt/117411.pdf (accessed January 2, 2014).