On the Film Thickness of Grease-Lubricated Contacts at Low Speeds

REFERENCES

• Lugt, P.M. (2009), “A Review on Grease Lubrication in Rolling Bearings,” Tribology Transactions, 52, pp 470–480.
   Web of Science ®Google Scholar
• Lugt, P.M. (2013), Grease Lubrication in Rolling Bearings, John Wiley & Sons Ltd.: Chichester, UK.
   Google Scholar
• Poon, S.Y. (1972), “An Experimental Study of Grease in Elastohydrodynamic Lubrication,” Journal of Lubrication Technology, 94(1), pp 27–34.
   Web of Science ®Google Scholar
• Cann, P.M. (1996), “Starvation and Reflow in a Grease-Lubricated Elastohydrodynamic Contact,” STLE Tribology Transactions, 39(3), pp 698–704.
   Web of Science ®Google Scholar
• Cann, P.M. and Spikes, H.A. (1992), “Film Thickness Measurements of Lubricating Greases under Normally Starved Conditions,” NLGI Spokesman, 56(2), pp 21–27.
   Google Scholar
• Cann, P.M. (1996), “Understanding Grease Lubrication,” Tribology Series, 31, pp 573–581.
   Google Scholar
• Baart, P., Lugt, P.M., and Prakash, B. (2010), “Non-Newtonian Effects on Film Formation in Grease-Lubricated Radial Lip Seals,” Tribology Transactions, 53(3), pp 308–318.
   Web of Science ®Google Scholar
• Kauzlarich, J.J. and Greenwood, J.A. (1972), “Elastohydrodynamic Lubrication with Herschel-Bulkley Model Greases,” ASLE Transactions, 15(4), pp 269–277.
   Google Scholar
• Jonkisz, W. and Krzeminski-Freda, H. (1979), “Pressure Distribution and Shape of an Elastohydrodynamic Grease Film,” Wear, 55, pp 81–89.
   Web of Science ®Google Scholar
• Cheng, J. (1994), “Elastohydrodynamic Grease Lubrication Theory and Numerical Solution in Line Contacts,” Tribology Transactions, 37(4), pp 711–718.
   Web of Science ®Google Scholar
• Yang, Z. and Qian, X. (1987), “A Study of Grease Film Thickness in Elastorheodynamic Rolling Point Contacts,” IMechE Conference Publication, pp 97–104. Paper No. 142/87.
   Google Scholar
• Dong, D. and Qian, X. (1988), “A Theory of Elastohydrodynamic Grease-Lubricated Line Contact Based on a Refined Rheological Model,” Tribology International, 21, pp 261–267.
   Web of Science ®Google Scholar
• Åstrom, H., Isaksson, O., and Höglund, E. (1991), “Video Recordings of an EHL Point Contact Lubricated with Grease,” Tribology International, 24(3), pp 179–184.
   Web of Science ®Google Scholar
• Williamson, B.P., Kendall, D.L. R., and Cann, P.M. (1993), “The Influence of Grease Composition on Film Thickness in EHD Contacts,” NLGI Spokesman, 57(8), pp 13–18.
   Google Scholar
• Kaneta, M., Ogata, T., Takubo, Y., and Naka, M. (2000), “Effects of Thickener Structure on Grease Elastohydrodynamic Lubricant Films,” Proceedings of Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 214, pp 327–336.
   Web of Science ®Google Scholar
• Hurley, S. and Cann, P.M. (1999), “Grease Composition and Film Thickness in Rolling Contacts,” NLGI Spokesman, 63(4), pp 12–22.
   Google Scholar
• Dong, D., Endo, T., and Kimura, Y. (2009), “Formation of Thick EHL Film with Grease at Low Speeds,” Proceedings of the World Tribology Congress, . September 6–11, Kyoto, Japan.
   Google Scholar
• Kimura, Y., Endo, T., and Dong, D. (2010), “EHL with Grease at Low Speeds,” Proceedings of CIST2008 & ITS-IFToMM2008, Advanced Tribology, pp 15–19.
   Google Scholar
• Furuhama, S. and Sumi, T. (1961), “A Dynamic Theory of Piston–Ring Lubrication,” Bulletin of the JSME, 4(16), pp 744–752.
   Google Scholar
• Vichard, J.P. (1971), “Transient Effects in the Lubrication of Hertzian Contacts,” Journal of Mechanical Engineering Science, 13, pp 173–189.
   Web of Science ®Google Scholar
• Dowson, D., Ruddy, B.L., and Economou, P.N. (1983), “The Elastohydrodynamic Lubrication of Piston Rings,” Proceedings of the Royal Society of London A, 386, pp 409–430.
   Google Scholar
• Grice, N., Sherrington, I., Smith, E.H., O'Donnel, S. G., and Springfellow, J.F. (1990), “A Capacitance Based System for High Resolution Measurement of Lubricant Film Thickness,” Proceedings of the 4th Nordic Symposium on Tribology, . Lubrication, Friction and Wear, Jacobsen, J., Klarskov, M., Eis, M. (Eds), Lyngby, Technical University of Denmark, pp 349–361.
   Google Scholar
• Glovnea, R., Furtuna, M., Nagata, Y., and Sugimura, J. (2012), “Electrical Methods for the Evaluation of Lubrication in Elastohydrodynamic Contacts,” Tribology Online, 7(1), pp 46–53.
   Google Scholar
• Jablonka, K., Glovnea, R., Bongaerts, J.H. H., and Morales-Espejel, G.E. (2012), “Comparative Measurements of EHD Film Thickness in Ball-on-Flat Rig and Rolling Element Bearing,” STLE 67th Annual Meeting, St. Louis, MO, 6–10 May.
   Google Scholar
• Heemskerk, R.S., Vermeiren, K.N., and Dolfsma, H. (1982), “Measurement of Lubrication Condition in Rolling Element Bearings,” Tribology Transactions, 25(4), pp 519–527.
   Google Scholar
• Morales-Espejel, G.E., Lugt, P.M., Pasaribu, R., and Cen, H. (2014), “Film Thickness in Grease Lubricated Slow Rotating Rolling Bearings,” Tribology International, 74, 7–19.
   Web of Science ®Google Scholar
• Hartl, M., Krupka, I., Poliscuk, R., Liska, M., Molimard, J., Querry, M., and Vergne, P. (2001), “Thin Film Colorimetric Interferometry,” Tribology Transactions, 44(2), pp 270–276.
   Web of Science ®Google Scholar
• Storken, J., Ippel, H., and Girardin-Humbert, C. (1997), “Lubcheck Mk3 User Manual,” . SKF Internal Report NL97T023B.
   Google Scholar
• Hamrock, B.J. (1991), “Fundamentals of Fluid Film Lubrication,” . NASA RP-1255.
   Google Scholar
• Cousseau, T., Björling, M., Graca, B., Campos, A., Seabra, J., and Larsson, R. (2012), “Film Thickness in a Ball-on-Disc Contact Lubricated with Greases, Bleed Oils and Base Oils,” Tribology International, 53, pp 53–60.
   Web of Science ®Google Scholar
• Hamrock, B.J., and Dowson, D. (1978), “Elastohydrodynamic Lubrication of Elliptical Contacts for Materials of Low Elastic Modulus 1—Fully Flooded Conjunction,” ASME Journal of Tribology, 100, pp 236–245.
   Web of Science ®Google Scholar
• Khonsari, M.M., and Booser, B.B. (2008), Applied Tribology: Bearing Design and Lubrication, . 2nd ed, Institution of Mechanical Engineers: London, UK.
   Google Scholar
• Johnson, K.L. (1970), “Regimes of Elastohydrodynamic Lubrication,” Journal of Mechanical Engineering Science, 12(1), pp 9–16.
   Google Scholar