Wear Measurement and Assessment of Explanted Cross-Linked PE Acetabular Cups Using a CMM

REFERENCES

• Australian Orthopaedic Association. (2013), “Australian Orthopaedic Association National Joint Registry Annual Report - 2012.” Available at: http://www.aoa.org.au (Accessed July 2013).
   Google Scholar
• Dumbleton, J.H., Manley, M.T., and Edidin, A.A. (2002), “A Literature Review of the Association between Wear Rate and Osteolysis in Total Hip Arthroplasty,” Journal of Arthroplasty, 17, pp 649–661.
   PubMed Web of Science ®Google Scholar
• Mosleh, M. and Suh, N.P. (1996), “Wear Particles of Polyethylene in Biological Systems,” Tribology Transactions, 39(4), pp 843–848.
   Web of Science ®Google Scholar
• Sochart, D.H. (1999), “Relationship of Acetabular Wear to Osteolysis and Loosening in Total Hip Anthroplasty,” Clinical Orthopaedics and Related Research, 363, pp 135–150.
   PubMed Web of Science ®Google Scholar
• Willert, H.G., Bertam, H., and Buchhom, G.H. (1990), “Osteolysis in Alloarthoplassty of the Hip: The Role of Ultrahigh Molecular Weight Polyethylene Wear Particles,” Clinical Orthopaedics and Related Research, 258, pp 73–82.
   PubMed Web of Science ®Google Scholar
• Heisel, C., Silva, M., Rosa, M.A. D., and Schmalzried, T.P. (2004), “Short-Term in vivo Wear of Cross-Linked Polyethylene,” Journal of Bone and Joint Surgery, 86, pp 748–751.
   Google Scholar
• Williams, P.A., Yamamoto, K., Masaoka, T., Oonishi, H., and Clarke, I.C. (2007), “Highly Crosslinked Polyethylenes in Hip Replacements: Improved Wear Performance or Paradox,” Tribology Transactions, 50(2), pp 277–290.
   Web of Science ®Google Scholar
• Hopper, R.H., Young, A.M., Orishimo, K.F., and McAuley, J.P. (2003), “Correlation between Early and Late Wear Rates in Total Hip Arthroplasty with Application to the Performance of Marathon Crosslinked Polyethylene Liners,” Journal of Arthroplasty, 18(1), pp 60–67.
   PubMed Web of Science ®Google Scholar
• Livingston, B.J., Chmell, M.J., Spector, M., and Poss, R. (1997), “Complications of Total Hip Arthroplasty Associated with the Use of an Acetabular Component with a Hylamer Liner,” Journal of Bone and Joint Surgery, 79, pp 1529–1538.
   Google Scholar
• Bragdon, C.R., Doerner, M., Martell, J., Jarrett, B., Palm, H., and Malchau, H. (2013), “The 2012 John Charnley Award: Clinical Multicenter Studies of the Wear Performance of Highly Crosslinked Remelted Polyethylene in THA,” Clinical Orthopaedics and Related Research, 471(3), pp 393–402.
   PubMed Web of Science ®Google Scholar
• Goto, K., Kawanabe, K., Akiyama, H., Morimoto, T., and Nakamura, T. (2008), “Clinical and Radiological Evaluation of Revision Hip Arthroplasty Using the Cement-in-Cement Technique,” Journal of Bone and Joint Surgery, British Volume, 90, pp 1013–1018.
   PubMed Web of Science ®Google Scholar
• Geerdink, C.H., Grimm, B., Vencken, W., Heyligers, I.C., and Tonino, A.J. (2008), “The Determination of Linear and Angular Penetration of the Femoral Head into the Acetabular Component as an Assessment of Wear in Total Hip Replacement: A Comparison of four Computer-Assisted Methods,” Journal of Bone and Joint Surgery, British Volume, 90, pp 839–846.
   PubMed Web of Science ®Google Scholar
• Bragdon, C.R., Malchau, H., Yuan, X., Perinchief, R., Kärrholm, J., Börlin, N., Estok, D.M., and Harris, W.H. (2002), “Experimental Assessment of Precision and Accuracy of Radiostereometric Analysis for the Determination of Polyethylene Wear in a Total Hip Replacement Model,” Journal of Orthopedic Research, 20, pp 688–695.
   PubMed Web of Science ®Google Scholar
• Ebramzeh, E., Sangiorgio, S.N., Lattuada, F., Kang, J.S., Chiesa, R., McKellop, H.A., and Dorr, L.D. (2003), “Accuracy of Measurement of Polyethylene Wear with Use of Radiographs of Total Hip Replacements,” Journal of Bone and Joint Surgery, 85, pp 2378–2384.
   Google Scholar
• ISO-14242–2. (2000), Implants for Surgery—Wear of Total Hip Joint Prostheses—Part 2: Methods of Measurements, . International Organization for Standardization.
   Google Scholar
• Blunt, L.A., Bills, P.J., Jiang, X.Q., and Chakrabarty, G. (2008), “Improvements in the Assessment of Wear of Total Knee Replacements Using Coordinate Measuring Machine Techniques,” Journal of Engineering in Medicine, 222, pp 309–318.
   Google Scholar
• Mizoue, T., Yamamoto, K., Nasaoka, T., Imakire, A., Agaki, M., and Clarke, I. (2003), “Validation of Acetabular Cup Wear Volume Based on Direct and Two-Dimensional Measurements: Hip Simulator Analysis,” Journal of Orthopaedic Science, 8, pp 491–499.
   PubMedGoogle Scholar
• Kothari, M., Bartel, D.L., and Booker, J.F. (1996), “Surface Geometry of Retrieved McKee–Farrar Total Hip Replacements,” Clinical Orthopaedics and Related Research, 329, pp S141–147.
   PubMed Web of Science ®Google Scholar
• Becker, A., Schollhorn, K., Dirix, Y., and Schomtzer, H. (2006), “Metal-on-Metal Bearings: The Influence of 3D Measurement Accuracy on the Calculated Wear of a Ball head Using a New Mathematical Approach,” Proceedings of the 52nd Annual Meeting of the Orthopaedic Research Society, Chicago, Illinois, 2006.
   Google Scholar
• Morlock, M., Bishop, N., Ruther, W., Delling, W., and Hahn, M. (2006), “Biomechanical: Morphological, and Histological Analysis of Early Failures in Hip Resurfacing Arthroplasty,” Proceedings of the Institution of Mechanical Engineers - Part H: Journal of Engineering in Medicine, 220(. 2), pp 333–344.
   Google Scholar
• Bills, P., Blunt, L., and Jiang, X. (2007), “Development of a Technique for Accurately Determining Clinical Wear in Explanted Total Hip Replacements,” Wear, 263(7–12), pp 1133–1137.
   Web of Science ®Google Scholar
• Lord, J.K., Langton, D.J., Nargol, A.V. F., and Loyace, T.J. (2011), “Volumetric Wear Assessment of Failed Metal-on-Metal Hip Resurfacing Prostheses,” Wear, 272, pp 79–87.
   Web of Science ®Google Scholar
• Jedenmalm, A., Nilsson, F., Noz, M.E., Green, D.D., Gedde, U.G., Clarke, I.C., Stark, A., Maguire, G.Q., Zeleznik, M.P., and Olivecrona, H. (2011), “Validation of a 3D CT Method for Measurement of Linear Wear of Acetabular Cups,” Acta Orthopaedica, 82, pp 35–41.
   PubMed Web of Science ®Google Scholar
• Jedenmalm, A., Noz, M., Olivecrona, H., Olivecrona, L., and Stark, A. (2008), “A New Approach for Assessment of Wear in Metal-Backed Acetabular Cups Using Computed Tomography,” Acta Orthopaedica, 79, pp 218–224.
   PubMed Web of Science ®Google Scholar
• Carmignato, S. and Savio, E. (2011), “Metrological Performance Verification of Coordinate Measuring Systems with Optical Distance Sensors,” International Journal of Precision Technology, 2(2/3), pp 153–171.
   Google Scholar
• Bills, P.J., Racasan, R., Underwood, R.J., Cann, P., Skinner, J., Hart, A.J., Jiang, X., and Blunt, L. (2012), “Volumetric Wear Assessment of Retrieval Metal-on-Metal Hip Prostheses and the Impact of Measurement Uncertainty,” Wear, 8(274–275), pp 212–219.
   Web of Science ®Google Scholar
• Campbell, D., Field, J.R., and Callary, S.A. (2010), “Second-Generation Highly Cross-Linked X3TM Polyethylene Wear: A Preliminary Radiostereometric Analysis Study,” Clinical Orthopaedics and Related Research, 468, pp 2704–2709.
   PubMed Web of Science ®Google Scholar
• Lee, K.Y. and Pienkowski, D. (1998), “Viscoelastic Recovery of Creep-Deformed Ultrahigh Molecular Weight Polyethylene (UHMWPE),” Characterisation and Properties of Ultrahigh Molecular Weight Polyethylene, Lee, K.Y. and Pienkowski, D. (Eds.), . pp. 30–38, ASTM Technical Publication, West Conshohocken, PA, USA.
   Google Scholar
• Fritsche, A., Bialek, K., Mittelmeier, W., Simnacher, M., Fethke, K., Wree, A., and Bader, R. (2008), “Experimental Investigations of the Insertion and Deformation Behavior of Press-Fit and Threaded Acetabular Cups for Total Hip Replacement,” Journal of Orthopedic Science, 13(3), pp 240–247.
   PubMed Web of Science ®Google Scholar
• Markel, D., Day, J., Siskey, R., Liepins, I., Kurtz, S., and Ong, K. (2008), Deformation of Metal-Backed Acetabular Components and the Impact of Liner Thickness in a Cadaveric Model, . Vol. 35, pp. 1131–1137, International Orthopeadics (SICOT), San Francisco.
   Google Scholar
• Ong, K., Rundell, S., Liepins, I., Laurent, R., Markel, D., and Kurtz, S. (2008), “Biomechanical Evaluation of Acetabular Component Polyethylene Stresses, Fracture Risk, and Wear Rate during Press-Fit Implantation,” Proceedings of the 2nd Joint Meeting of the Bone Research Society and British Orthopaedic Research Society, . UK, June 23–25, 2008, Poster No: P10.
   Google Scholar
• ISO-10360–2. (2009), Geometrical Product Specifications (GPS)—Acceptance and Reverification Tests for Coordinate Measuring Machines (CMMs), Part 2: CMMs Used for Measuring Size, International Organization for Standardization.
   Google Scholar
• Isaac, G.H., Dowson, D., and Wroblewski, B.M. (1996), “An Investigation into the Origins of Time-Dependent Variation in Penetration Rates with Charnley Acetabular Cups—Wear, Creep or Degradation,” Proceedings of the Institution of Mechanical Engineers, 210, pp 209–216.
   Google Scholar
• JCGM-100. (2008), Evaluation of Measurement Data—Guide to the Expression of Uncertainty in Measurement (GUM 1995 with Minor Corrections), . Bureaou of International des Poids et Mesures, France.
   Google Scholar
• ISO-15530–3. (2007), Geometrical Product Specifications (GPS). Coordinate Measuring Machines (CMM). Technique for Determining the Uncertainty of Measurement. Use of Calibrated Workpieces or Standards, . International Organization for Standardization.
   Google Scholar
• ISO/IEC-17043. (2010), Conformity Assessment—General Requirements for Proficiency Testing, International Organisation for Standardisation: Geneva.
   Google Scholar
• Lord, J.K., Langton, D.J., Nargol, A.V. F., and Joyce, T.J. (2011), “Volumetric Wear Assessment of Failed Metal-on-Metal Hip Resurfacing Prostheses,” Wear, 272, pp 79–87.
   Web of Science ®Google Scholar
• McCalden, R.W., Steven, J.M., Rorabeck, C.H., Bourne, R.B., Chess, B.D., and Charron, K.D. (2009), “Wear Rate of Highly Cross-Linked Polyethylene in Total Hip Anthroplasty: A Randomised Controlled Trial,” Journal of Bone and Joint Surgery, 91(4), pp 773–782.
   Web of Science ®Google Scholar
• Wroblewski, B.M., Siney, P.D., and Fleming, P.A. (1999), “Low-Friction Arthroplastyof the Hip Using Alumina Ceramic and Crosslinked Polyethylene: A Ten-Year Follow-Up Report,” Journal of Bone and Joint Surgery, 81, pp 54–55.
   PubMed Web of Science ®Google Scholar
• Campbell, D., Mercer, G., Nilsson, K.G., Wells, V., Field, J.R., and Callary, S.A. (2010), “Wear of a Highly Cross-Linked Polyethylene Liner: A Preliminary RSA Study,” European Journal of Orthopaedic Surgery and Traumatology, 20, pp 23–27.
   Web of Science ®Google Scholar
• Bragdon, C.R., Malchau, H., Yuan, X., Perinchief, R., Karrholm, J., Borlin, N., Estok, D.M., and Harris, W.H. (2002), “ Experimental Assessment of Precision and Accuracy of Radiostereometric Analysis for the Determination of Polyethylene Wear in a Total Hip Replacement Model,” Journal of Orthopedic Research, 20, pp 688–695.
   PubMed Web of Science ®Google Scholar
• Hua, X. (2013), “Edge Loading in Metal-on-Polyethylene Modular Total Hip Replacement: Effect of Cup Angles and Microseparation,” Proceedings of the 2013 Orthopaedic Research Society Annual Meeting, . USA, January 26–29, 2013.
   Google Scholar
• Kobayashi, K., Takaoka, A., Tshukada, M., and Ueno, M. (1998), “Polyethylene Wear from Femoral Bipolar Neck–Cup Impingement as a Cause of Femoral Prosthetic Loosening,” Archives of Orthopaedic and Trauma Surgery, 117, pp 390–391.
   PubMed Web of Science ®Google Scholar
• Tower, S.S., Currier, J.H., Currier, B.H., Lyford, K.A., Citter, D.W. V., and Mayor, M.B. (2007), “Rim Cracking of the Cross-Linked Longevity Polyethylene Acetabular Liner after Total Hip Anthroplasty,” Journal of Bone and Joint Surgery, 89, pp 2212–2217.
   Web of Science ®Google Scholar
• Tuke, M., Taylor, A., Roques, A., and Maul, C. (2010), “3D Linear and Volumetric Measurement on Artificial Hip Joints—Validation of a New Methodology,” Precision Engineering, 34, pp 777–783.
   Web of Science ®Google Scholar
• Carmignato, S., Dreossi, D., Mancini, L., Marinello, F., Tromba, G., and Savio, E. (2009), “Testing of X-ray Microtomography Systems Using a Traceable Geometrical Standard,” Measurement Science and Technology, 20, 1–7.
   PubMed Web of Science ®Google Scholar
• Spinelli, M., Carmignato, S., Affatato, A., and Viceconti, M. (2009), “CMM-Based Procedure for Polyethylene Non-Congruous Unicompartmental Knee Prosthesis Wear Assessment,” Wear, 267, pp 753–756.
   Web of Science ®Google Scholar