REFERENCES
- Howard, S.A. (1999), “Rotordynamics and Design Methods of an Oil-Free Turbocharger,” NASA/CR 1999-208689.
- Heshmat, H., Walton, J.F., DellaCorte, C., and Valco, M.J. (2000), “Oil Free Turbocharger Demonstration Paves Way to Gas Turbine Engine Applications,” Proceedings of ASME Turbo Expo, Munich, Germany, May 8–11, 2000.
- Lee, Y.-B., Park, D.-J., and Kim, C.H. (2008), “Stability and Efficiency of Oil-Free Turbocharger with Foil Bearings for SUV,” Proceedings of SAE International Congress, Shanghai, China, June 23–25, 2008.
- Lee, Y.-B., Park, D.-J., Kim, T.H., and Sim, K. (2012), “Development and Performance Measurement of Oil-Free Turbocharger Supported on Gas Foil Bearings,” Journal of Engineering for Gas Turbines and Power, 134, Article 032506.
- Sim, K., Kwon, S.B., Kim, T.H., and Lee, Y.-B. (2012), “Feasibility Study of an Oil-Free Turbocharger Supported on Gas Foil Bearings via On-Road Tests of a 2-Liter Class Diesel Vehicle,” Journal of Engineering for Gas Turbines and Power, 135, Article 052701.
- Kim, T.H. and San Andrés, L. (2008), “Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data,” Journal of Engineering for Gas Turbines and Power, 130, Article 012504.
- Kim, T.H. and San Andrés, L. (2009), “Effects of a Mechanical Preload on the Dynamic Force Response of Gas Foil Bearings: Measurements and Model Predictions,” Tribology Transactions, 52, pp 569–580.
- Le Lez, S., Arghir, M., and Frene, J. (2007), “Static and Dynamic Characterization of a Bump-Type Foil Bearing Structure,” Journal of Tribology, 129, pp 75–83.
- Kim, D. (2007), “Parametric Studies on Static and Dynamic Performance of Air Foil Bearings with Different Top Foil Geometries and Bump Stiffness Distributions,” Journal of Tribology, 129, pp 354–364.
- Kim, D. and Park, S. (2009), “Hydrostatic Air Foil Bearings: Analytical and Experimental Investigation,” Tribology International, 42, pp 413–425.
- Sim, K., Lee, Y.-B., and Kim, T.H. (2013), “Effects of Mechanical Preload and Bearing Clearance on Rotordynamic Performance of Lobed Gas Foil Bearings for Oil-Free Turbochargers,” Tribology Transactions, 56, pp 224–235.
- Sim, K., Lee, J., Kim, C.H., Lee, Y.-B., and Kim, T.H. (2012), “Rotordynamic Performance of Shimmed Gas Foil Bearings for Oil-Free Turbochargers,” Journal of Tribology, 134, Article 031102.
- Iordanoff, I. (1999), “Analysis of an Aerodynamic Compliant Foil Thrust Bearing: Method for a Rapid Design,” Journal of Tribology, 121, pp 816–822.
- Faria, M. and San Andrés, L. (2000), “On the Numerical Modeling of High speed Hydrodynamic Gas Bearing,” Journal of Tribology, 122, pp 124–130.
- Park, D.J., Kim, C.H., Jang, G.H., and Lee, Y.B. (2008), “Theoretical Considerations of Static and Dynamic Characteristics of Air Foil Thrust Bearing with Tilt and Slip Flow,” Tribology International, 41(4), pp 282–295.
- Ku, C.-P. R. (1993), “An Experimental and Theoretical Study of the Dynamic Structural Stiffness in Compliant Foil Journal Bearings,” ASME 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, NM, September 19–22, 1993.
- Ku, C.-P. R. (1993), “Dynamic Structural Properties in Compliant Foil Thrust Bearings—Comparisons between Experimental and Theoretical Results,” Journal of Tribology, 116, pp 70–75.
- Rubio, D. and San Andrés, L. (2007), “Structural Stiffness, Dry-Friction Coefficient and Equivalent Viscous Damping in a Bump-Type Foil Gas Bearing,” Journal of Engineering for Gas Turbines and Power, 129(2), pp 494–502.
- San Andrés, L. and Kim, T.H. (2009), “Analysis of Gas Foil Bearings Integrating FE Top Foil Models,” Tribology International, 42, pp 111–120.
- Turbomachinery Laboratory, Texas A&M Engineering Experiment Station. XLTRC2 Brochure. Available at: http://turbolab.tamu.edu/wp-content/uploads/2014/08/XLTRC2Brochure.pdf (accessed August 12, 2014).
- San Andrés, L. and Kim, T.H. (2008), “Forced Nonlinear Response of Gas Foil Bearing Supported Rotors,” Tribology International, 418), pp 704–715.
- Lee, D.H., Kim, Y.C., and Kim, K.W. (2009), “The Dynamic Performance Analysis of Foil Journal Bearings Considering Coulomb Friction: Rotating Unbalance Response,” Tribology Transactions, 52, pp 146–156.
- Kim, T.H., Breedlove, A.W., and San Andrés, L. (2009), “Characteristics of a Foil Bearing Structure at Increasing Temperatures: Static Load and Dynamic Force Performance,” Journal of Tribology, 131, Article 041703.