Dry Sliding Wear Behavior of Al₂O₃-TiC Ceramic Composites Added with Solid Lubricant CaF₂ by Cold Pressing and Sintering

REFERENCES

• Yang, X.F., Xiangbo, Z.E., Wang, H.Y., and Wang, H. (2009), “Wear Properties and Microstructures of Alumina Matrix Composite Ceramics Used for Drawing Dies,” Ceramics International, 34(12), pp 3495–3502.
   Web of Science ®Google Scholar
• Jinjun, L., Shengrong, Y., Jingbo, W., and Qunji, X. (2001), “Mechanical and Tribological Properties of Ni-Based Alloy/CeF3/Graphite High Temperature Self-Lubricating Composites,” Wear, 249(10), pp 1070–1076.
   Google Scholar
• Kezheng, S., Zhenlin, L., and Zhihao, J. (2002), “A Study of the SiC-L Composite Ceramics for Self-Lubrication,” Wear, 253(10), pp 1188–1193.
   Google Scholar
• Min, H.C., Jeong, J., Seong, J.K., and Ho, J. (2006), “Tribological Properties of Solid Lubricants (Graphite, Sb2S3, MoS2) for Automotive Brake Friction Materials,” Wear, 260(7–8), pp 855–860.
   Web of Science ®Google Scholar
• Wang, L. (1994), Friction Chemistry of Lubrication, China Petrochemical Press: Beijing.
   Google Scholar
• Murakawa, M., Jin, M., and Hayashi, M. (2004), “Study on Semidry Dry Wire Drawing Using DLC Coated Dies,” Surface & Coatings Technology, 177–178, pp 631–637.
   Web of Science ®Google Scholar
• Sari, N.Y. and Yilmaz, M. (2008), “Improvement of Wear Resistance of Wire Drawing Rolls with Cr-Ni-B-Si+WC Thermal Spraying Powders,” Surface & Coatings Technology, 202(13), pp 3136–3141.
   Web of Science ®Google Scholar
• El Hakim, M.A., Abad, M.D., Abdelhameed, M.M., Shalaby, M.A., and Veldhuis, S.C. (2011), “Wear Behavior of Some Cutting Tool Materials in Hard Turning of HSS,” Tribology International, 44(10), pp 1174–1181.
   Web of Science ®Google Scholar
• Yang, X.F., Deng, J.X., Wang, H., and Ze, X.B. (2007), “Wear Behaviors and Lubrication Medium of TiC/Al2O3 Ceramic Wire Drawing Dies,” Transactions of Nonferrous Metals Society of China, 7, pp s663–s666.
   Google Scholar
• Suh, M.-S., Chae, Y.-H., and Kim, S.-S. (2008), “Friction and Wear Behavior of Structural Ceramics Sliding against Zirconia,” Wear, 264(9–10), pp 800–806.
   Web of Science ®Google Scholar
• Yang, X.F., Deng, J.X., and Yao, S.Q. (2005), “Friction and Wear Behaviors of Al2O3/TiC Ceramic Composite Using as Wire Drawing Dies,” Journal of Ceramics Society of China, 33(12), pp 1522–1526.
   Google Scholar
• Chang, H., Binner, J., and Higginson, R. (2010), “Dry Sliding Wear Behaviour of Al(Mg)/Al2O3 Interpenetrating Composites Produced by a Pressureless Infiltration Technique,” Wear, 268(1–2), pp 166–171.
   Web of Science ®Google Scholar
• Harsha, A.P. (2011), “An Investigation on Low Stress Abrasive Wear Characteristics of High Performance Engineering Thermoplastic Polymers,” Wear, 271(5–6), pp 942–951.
   Web of Science ®Google Scholar
• Song, J., Valefi, M., de Rooij, M., and Schipper, D.J. (2010), “A Mechanical Model for Surface Layer Formation on Self-Lubricating Ceramic Composites,” Wear, 268(9–10), pp 1072–1079.
   Web of Science ®Google Scholar
• Deng, J., Can, T., Sun, J. (2005), “Microstructure and Mechanical Properties of Hot-Pressed Al2O3/TiC Ceramic Composites with the Additions of Solid Lubricants,” Ceramics International, 31(2), pp 249–256.
   Web of Science ®Google Scholar
• Ravindran, P., Manisekar, K., Narayanasamy, R., and Narayanasamy, P. (2013), “Tribological Behaviour of Powder Metallurgy-Processed Aluminium Hybrid Composites with the Addition of Graphite Solid Lubricant,” Ceramics International, 39(2), pp 1169–1182.
   Web of Science ®Google Scholar
• Ouyang, J.H., Li, Y.F., Wang, Y.M., Zhou, Y., Murakami, T., and Sasaki, S. (2009), “Microstructure and Tribological Properties of ZrO2(Y2O3) Matrix Composites Doped with Different Solid Lubricants from Room Temperature to 800°C,” Wear, 267(9–10), pp 1353–1360.
   Web of Science ®Google Scholar
• Masanta, M., Shariff, S.M., and Roy Choudhury, A. (2010), “Tribological Behavior of TiB2-TiC-Al2O3 Composite Coating Synthesized by Combined SHS and Laser Technology,” Surface & Coatings Technology, 204(16–17), pp 2527–2538.
   Web of Science ®Google Scholar
• Masanta, M., Shariff, S.M., Roy Choudhury, A. (2011), “A Comparative Study of the Tribological Performances of Laser Clad TiB2-TiC-Al2O3 Composite Coatings on AISI 1020 and AISI 304 Substrates,” Wear, 271(7–8), pp 1124–1133.
   Web of Science ®Google Scholar
• Deng, J., Cao, T., Ding, Z., Liu, J., Sun, J., and Zhao, J. (2006), “Tribological Behaviors of Hot-Pressed Al2O3/TiC Ceramic Composites with the Additions of CaF2 Solid Lubricants,” Journal of the European Ceramics Society, 26(8), pp 1317–1323.
   Web of Science ®Google Scholar
• Deng, J., Liu, L., Yang, X., Liu, J., Sun, J., Zhao, J. (2007), “Self-Lubrication of Al2O3/TiC/CaF2 Ceramic Composites in Sliding Wear Tests and in Machining Processes,” Materials & Design, 28(3), pp 757–764.
   Web of Science ®Google Scholar
• Deng, J., Cao, T., Yang, X., Liu, J., Sun, J., Zhao, J. (2007), “Wear Behavior and Self Tribofilm Formation of Hot-Pressed Al2O3/TiC/CaF2 Ceramic Composites Sliding against Cemented Carbide,” Ceramics International, 33(2), pp 213–220.
   Web of Science ®Google Scholar