Effects of Shaft Axial Motion and Misalignment on the Lubrication Performance of Journal Bearings Via a Fast Mixed EHL Computing Technology

REFERENCES

• McKee, S.A. and McKee, T.R. (1932), “Pressure Distribution in the Oil Film of Journal Bearings,” ASME Transactions, 54, pp 149–65.
   Google Scholar
• Dubois, G.B., Mabie, H.H., and Ocvirk, F.W. (1951), “Experimental Investigation of Oil Film Pressure Distribution for Misaligned Plain Bearings,” NACA Technical Note 2507.
   Google Scholar
• Smalley, A.J. and McCallion, H. (1966), “The Effect of Journal Misalignment on the Performance of a Journal Bearing under Steady Running Conditions,” Proceedings of the Institution of Mechanical Engineerings - Part B, 181, pp 45–54.
   Google Scholar
• Asanable, S., Akahoshi, M., and Asai, R. (1971), “Theoretical and Experimental Investigation of Misaligned Journal Bearing Performance,” Institution of Mechanical Engineers: Tribology Convention, London.
   Google Scholar
• Pinkus, O. and Bupara, S.S. (1979), “Analysis of Misaligned Grooved Journal Bearings,” Journal of Tribology, 101(4), pp 503–509.
   Web of Science ®Google Scholar
• Vijayaraghavan, D. and Keith, T.G. (1989), “Effect of Cavitation on the Performance of a Grooved Misaligned Journal Bearing,” Wear, 134(2), pp 377–397.
   Web of Science ®Google Scholar
• Banwait, S.S., Chandrawat, H.N., and Adithan, M. (1998), “Thermohydrodynamic Analysis of Misaligned Plain Journal Bearing,” Proceedings of the 1st Asia International Conference on Tribology, Beijing, China. 12–15 October.
   Google Scholar
• Wang, Y.S., Wang, Q., and Lin, C. (2003), “A Mixed-EHL Analysis of Effects of Misalignments and Elastic Deformations on the Performance of a Coupled Journal–Thrust Bearing System,” Tribology International, 39, pp 281–289.
   Web of Science ®Google Scholar
• Satish, C.S., Vikas, M.P., and Jain, S.C. (2012), “Combined Influence of Wear and Misalignment of Journal on the Performance Analysis of Three-Lobe Three-Pocket Hybrid Journal Bearing Compensated With Capillary Restrictor,” Journal of Tribology, 134(1), p 011703-1-10.
   PubMed Web of Science ®Google Scholar
• Fisher, A. (1922), “Oil Flow in Ring Lubricated Bearings,” Machinery, 21, p 311.
   Google Scholar
• Dubois, G.B., Ocvirk, F.W., and Wehe, R.L. (1957), “Properties of Misaligned Journal Bearings,” Journal of Basic Engineering, 79, pp 1205–1212.
   Google Scholar
• Nicolas, D. and Frêne, J. (1973), “Tilting Torque Permissible in Plain Bearings. Theory, Experimental Results and Application to Machine Design,” Proceedings of the First European Tribology Congress, pp 353–360, Mechanical Engineering Publications Limited: London. 25–27 September.
   Google Scholar
• Mokhtar, M.O. A., Abdel Rahman, M.A., and Safar, Z.S. (1983), “Analysis of Misaligned Journal Bearings with Axial and Spiral Feeding,” Wear, 85, pp 331–337.
   Web of Science ®Google Scholar
• Mokhtar, M.O. A., Safar, Z.S., and Abd-EI-Rahman, M.A. M. (1985), “An Adiabatic Solution of Misaligned Journal Bearings,” Journal of Tribology, 107(2), pp 263–267.
   Web of Science ®Google Scholar
• Qiu, Z.L. and Tieu, A.K. (1995), “Misalignment Effect on the Static and Dynamic Characteristics of Hydrodynamic Journal Bearings,” Journal of Tribology, 117(4), pp 717–723.
   Web of Science ®Google Scholar
• Shi, F.H. and Wang, Q. (1998), “A Mixed-TEHD Model for Journal–Bearing Conformal Contacts—Part I: Model Formulation and Approximation of Heat Transfer Considering Asperity Contact,” Journal of Tribology, 120(2), pp 198–205.
   Web of Science ®Google Scholar
• Wang, Q., Shi, F.H., and Lee, S.C. (1998), “A Mixed-TEHD Model for Journal–Bearing Conformal Contact—Part II: Contact, Film Thickness, and Performance Analyses,” Journal of Tribology, 120(2), pp 206–213.
   Web of Science ®Google Scholar
• Ebrat, O., Mourelatos, Z.P., Hu, K.X., Vlahopoulos, N., and Vaidyanathan, K. (2004), “An Elastohydrodynamic Coupling of a Rotating Crankshaft and a Flexible Engine Block,” Journal of Tribology, 126(2), pp 233–241.
   Web of Science ®Google Scholar
• Xiong, S.W., Wang, Q., Lin, C., Liu, W.K., and Zhu, D. (2006), “A Finite-Element Local-Enrichment (FE-LE) Model for Texturing Journal–Bearing Surfaces,” Proceedings of STLE/ASME International Joint Tribology Conference, San Antonio, TX. 23–25 October.
   Google Scholar
• Dobrica, M.B., Fillon, M., and Maspeyrot, P. (2007), “Deterministic Modeling of Elasto-Plastic Contact and Mixed Lubrication in Small Fluid Bearings,” STLE's 62nd Annual Meeting, Philadelphia, PA. 6–10 May.
   Google Scholar
• Dobrica, M.B., Fillon, M., and Maspeyrot, P. (2008), “Influence of Mixed-Lubrication and Rough Elastic–Plastic Contact on the Performance of Small Fluid Film Bearings,” Tribology Transactions, 51(6), pp 699–717.
   Web of Science ®Google Scholar
• Xiong, S.W., Lin, C., Liu, W.K., Wang, Q., and Wang, Y.S. (2010), “An Efficient Elastic Displacement Analysis Procedure for Simulating Transient Conformal-Contact Elastohydrodynamic Lubrication System,” Journal of Tribology, 132(2), p 021502-1-9.
   Web of Science ®Google Scholar
• Wang, N.R. and Tasi, C.M. (2006), “Application of Thread-Level Parallel Programming to Thermohydrodynamic Lubrication Computation,” Tribology Transactions, 49(4), pp 473–481.
   Web of Science ®Google Scholar
• Wang, N.R., Huang, H.C., and Chang, S.H. (2011),”Comparison of Iterative Methods for the Solution of Compressible-Fluid Reynolds Equation,” Journal of Tribology, 133(2), p 021702-1-7.
   PubMed Web of Science ®Google Scholar
• Wang, N.R. and Chang, S.H. (2012), “Parallel Iterative Solution Schemes for the Analysis of Air Foil Bearing,” Journal of Mechanics, 28, pp 413–422.
   Web of Science ®Google Scholar
• Chan, C.W., Han, Y.H., Wang, Z.J., Wang, J.X., Shi, F.H., Wang, N.R., and Wang, Q. (2014), “Exploration on a Fast EHL Computing Technology for Analyzing Journal Bearings with Engineered Surface Textures,” Tribology Transactions, 57(2), pp 206–215.
   Web of Science ®Google Scholar
• Patir, N. and Cheng, H.S. (1978), “An Average Flow Model for Determine Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication,” Journal of Lubrication Technology, 100(1), pp 12–17.
   Web of Science ®Google Scholar
• Wu, C.W. and Zheng, L.Q. (1989), “An Average Reynolds Equation for Partial Film Lubrication with a Contact Factor,” Journal of Tribology, 111, pp 188–191.
   Web of Science ®Google Scholar
• Lee, S.C. and Ren, N. (1996), “Behavior of Elastic–Plastic Rough Surface Contacts as Affected by the Surface Topography, Load and Materials,” Tribology Transactions, 39(1), pp 67–74.
   Web of Science ®Google Scholar
• Safar, Z.S. (1984), “Energy Loss Due to Misalignment of Journal Bearings,” Tribology International, 17(2), pp 107–109.
   Web of Science ®Google Scholar
• Safar, Z.S. and Riad, M.S. M. (1988), “Prediction of the Coefficient of Friction of a Misaligned Turbulent Flow Journal Bearing,” Tribology International, 21(1), pp 15–19.
   Web of Science ®Google Scholar
• Woodward, W. and Paul, B. (1976), “Contact Stress for Closely Conforming Bodies—Application to Cylinders and Spheres,” DOT-TST-77-48.
   Google Scholar
• Wang, Q., Shi, F.H., and Lee, S.C. (1997), “A Mixed-Lubrication Study of Journal Bearing Conformal Contacts,” Journal of Tribology, 119(3), pp 456–461.
   Web of Science ®Google Scholar