Wear Behavior of Thixoformed Al-25 wt% Mg₂Si Composites Produced by Slope Casting Method

REFERENCES

• Tjong, S.C. and Ma, Z.Y. (2000), “Microstructure and Mechanical Characteristics of in-situ Metal Matrix Composites,” Materials Science and Engineering: R, 29, pp 49–113.
   Web of Science ®Google Scholar
• Dmitriev, A.I., Osterle, W., and Klob, H. (2008), “Numerical Simulation of Mechanically Mixed Layer Formation at Local Contacts of an Automotive Brake System,” Tribology Transactions, 51, pp 810–816.
   Web of Science ®Google Scholar
• Hu, T. and Hu, L. (2011), “Tribological Properties of Lubricating Films on the Al-Si Alloy Surface via Laser Surface Texturing,” Tribology Transactions, 54, pp 800–805.
   Web of Science ®Google Scholar
• Qin, Q.D., Zhao, Y.G., Zhou, W., and Cong, P.J. (2007), “Effect of Phosphorus on Microstructure and Growth Manner of Primary Mg2Si Crystal in Mg2Si-Al,” Materials Science and Engineering A, 447, pp 186–191.
   Web of Science ®Google Scholar
• Qin, Q.D., Zhao, Y.G., Xiu, K., Zhou, W., and Liang, Y.H. (2005), “Microstructure Evolution of in situ Mg2Si/Al-Si-Cu Composite in Semisolid Remelting Processing,” Materials Science and Engineering A, 407, pp 196–200.
   Web of Science ®Google Scholar
• Khosravi, H., Eslami-Farsani, R., and Askari-Paykani, M. (2014), “Modeling and Optimization of Cooling Slope Process Parameters for Semi-Solid Casting of A356 Al Alloy,” Transactions of Nonferrous Metals Society of China, 24, pp 961–968.
   Web of Science ®Google Scholar
• Birol, Y. (2007), “A357 Thixoforming Feedstock Produced by Cooling Slope Casting,” Journal of Materials Processing Technology, 186, pp 94–101.
   Web of Science ®Google Scholar
• Kund, N.K. and Dutta, P. (2010), “Numerical Simulation of Solidification of Liquid Aluminum Alloy Flowing on Cooling Slope,” Transactions of Nonferrous Metals Society of China, 20, pp 898–905.
   Web of Science ®Google Scholar
• Haga, T. and Suzuki, S. (2001), “Casting of Aluminum Alloy Ingots for Thixoforming Using a Cooling Slope,” Journal of Materials Processing Technology, 118, pp 169–172.
   Web of Science ®Google Scholar
• Haga, T. and Kapranos, P. (2002), “Simple Rheocasting Processes,” Journal of Materials Processing Technology, 130, pp 594–598.
   Web of Science ®Google Scholar
• Guan, R., Zhang, L., Wang, C., Wen, J., and Cui, J. (2007), “Three Dimensional Analysis of the Modified Sloping Cooling/Shearing Process,” University Science Technology Beijing, 14, pp 146–150.
   Google Scholar
• Mehrara, H., Nili-Ahmadabadi, M., Heidarian, B., Ashouri, S., and Ghiasinejad, J. (2008), “Modeling of Inclined Cooling Plate Semisolid Processing by Model Alloy,” Solid State Phenomena, 141, pp 785–790.
   Google Scholar
• Legoretta, E.C., Atkinson, H.V., and Jones, H. (2008), “Cooling Slope Casting to Obtain Thixotropic Feedstock II: Observations with A356 Alloy,” Journal of Materials Science, 43, pp 5456–5469.
   Web of Science ®Google Scholar
• Birol, Y. (2008), “Cooling Slope Casting and Thixoforming of Hypereutectic A390 Alloy,” Journal of Materials Processing Technology, 207, pp 94–101.
   Web of Science ®Google Scholar
• Ahlatci, H., Candan, E., and Cimenoglu, H. (2004), “Abrasive Wear Behavior and Mechanical Properties of Al-Si/SiC Composites,” Wear, 257, pp 625–632.
   Web of Science ®Google Scholar
• Wienecke, D. and Bartz, W.J. (2001), “Automobile Transmission Gears as Tribological Systems,” Tribology Transactions, 44, pp 484–488.
   Web of Science ®Google Scholar
• Li, C., Wu, Y.Y., Li, H., and Liu, X.F. (2011), “Morphological Evolution and Growth Mechanism of Primary Mg2Si Phase in Al-Mg2Si Alloys,” Acta Materialia, 59, pp 1058–1067.
   Web of Science ®Google Scholar
• Li, S., Zhao, S., Pan, M., Zhao, D., Chen, X., Barabash, O.M., and Barabash, R.I. (1997), “Solidification and Structural Characteristics of α (Al)-Mg2Si Eutectic,” Materials Transactions, Japan Institute of Metals, 38, pp 553–559.
   Web of Science ®Google Scholar
• Sun, Y. and Ahlatci, H. (2011), “Mechanical and Wear Behaviors of Al-12Si-xMg Composites Reinforced with in situ Mg2Si Particles,” Materials & Design, 32, pp 2983–2987.
   Web of Science ®Google Scholar
• Qin, Q.D., Zhao, Y.G., and Zhou, W. (2008), “Dry Sliding Wear Behavior of Mg2Si/Al Composites against Automobile Friction Material,” Wear, 264, pp 654–661.
   Web of Science ®Google Scholar
• Qin, Q.D., Zhao, Y.G., Cong, P.J., Zhou, W., and Xu, B. (2007), “Semi-Solid Microstructure of Mg2Si/Al Composite by Cooling Slope Cast and Its Evolution during Partial Remelting Process,” Materials Science and Engineering A, 444, pp 99–103.
   Web of Science ®Google Scholar
• Azarbarmas, M., Emamy, M., Karamouz, M., Alipour, M., and Rassizadehghani, J. (2011), “The Effects of Boron Additions on the Microstructure, Hardness and Tensile Properties of in-situ Al-15 wt% Mg2Si Composite,” Materials & Design, 32, pp 5049–5054.
   Web of Science ®Google Scholar
• Wu, S., Wu, X., and Xiao, Z. (2004), “A Model of Growth Morphology for Semi-Solid Metals,” Acta Materialia, 52, pp 3519–3524.
   Web of Science ®Google Scholar
• Atkinson, H.V. (2005), “Modelling the Semi-Solid Processing of Metallic Alloys,” Progress in Materials Science, 50, pp 341–412.
   Web of Science ®Google Scholar
• Hager, C.H., Segall, A.E., Conway, J.C., and Dang, H. (2003), “Evaluation of the Reciprocating-Wear Behavior of Unlubricated Hypereutectic Al-Si Alloys,” Tribology Transactions, 46, pp 206–210.
   Web of Science ®Google Scholar
• Abouei, V., Saghafian, H., Shabestari, S.G., and Zarghami, M. (2010), “Effect of Fe-Rich Intermetallics on the Wear Behavior of Eutectic Al-Si Piston Alloy (LM13),” Materials & Design, 31, pp 3518–3524.
   Web of Science ®Google Scholar
• Flemings, M.C. (1991), “Behavior of Metal Alloys in the Semisolid State,” Metallurgical Transactions A, 22
   Web of Science ®Google Scholar
• Gencalp, S. and Saklakoglu, N. (2010), “Semisolid Microstructure Evaluation during Cooling Slope Casting under Vibration of A380 Aluminum Alloy,” Materials and Manufacturing Processes, 25, pp 943–947.
   Web of Science ®Google Scholar
• Hirt, G. and Kopp, R. (2009), Thixoforming: Semi-Solid Metal Processing, 1st ed., Wiley: New York.
   Google Scholar
• Nishida, Y. (2013), Introduction to Metal Matrix, 1st ed., Springer: Nagoya, Japan.
   Google Scholar
• Uggowitzer, P.J. and Kaufmann, H. (2004), “Evolution of Globular Microstructure in New Rheocasting and Super Rheocasting Semi-Solid Slurries,” Steel Research International, 75, pp 525–530.
   Web of Science ®Google Scholar
• Ostermeyer, G.P. (2003), “On the Dynamics of the Friction Coefficient,” Wear, 254, pp 852–858.
   Web of Science ®Google Scholar
• Blau, P.J. (2001), “The Significance and Use of the Friction Coefficient,” Tribology International, 34, pp 585–591.
   Web of Science ®Google Scholar