A Novel Fluid Structure Interaction-EHD Model and Optimization Procedure for an Asymmetrical Axially Balanced External Gear Machine

REFERENCES

• Hooke, C.J. and Koc, E. (1984), “End Plate Balance in Gear Pumps,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 198(1), pp 55–60.
   Google Scholar
• Koc, E., Ng, K., and Hooke, C.J. (1997), “An Analysis of the Lubrication Mechanisms of the Bush-Type Bearings in High Pressure Pumps,” Tribology International, 30(8), pp 553–560.
   Web of Science ®Google Scholar
• Koc, E. and C.J. Hooke. (1997), “An Experimental Investigation into the Design and Performance of Hydrostatically Loaded Floating Wear Plates in Gear Pumps,” Wear, 209, pp 184–192.
   Web of Science ®Google Scholar
• Borghi, M., Milani, M., Paltrinieri, F., and Zardin, B. (2005), Studying the Axial Balance of External Gear Pumps, SAE International. (No. 2005-01-3634). SAE Technical Paper.
   Google Scholar
• Morgridge, D., Evans, H.P., Snidle, R.W., and Yates, M.K. (2011), “A Study of Seal Lubrication in an Aerospace Fuel Gear Pump Including the Effects of Roughness and Mixed Lubrication,” Tribology Transactions, 54(4), pp 657–665.
   Web of Science ®Google Scholar
• Dhar, S. and Vacca, A. (2012), “A Novel CFD–Axial Motion Coupled Model for the Axial Balance of Lateral Bushings in External Gear Machines,” Simulation Modelling Practice and Theory, 26, pp 60–76.
   Web of Science ®Google Scholar
• Dhar, S. and Vacca, A. (2013), “A Fluid Structure Interaction—EHD Model of the Lubricating Gaps in External Gear Machines: Formulation and Validation,” Tribology International, 62, pp 78–90.
   Web of Science ®Google Scholar
• Pelosi, M. and Ivantysynova, M. (2012), “A Geometric Multigrid Solver for the Piston–Cylinder Interface of Axial Piston Machines,” Tribology Transactions, 55(2), pp 163–174.
   Web of Science ®Google Scholar
• Bergada, J.M., Haynes, J.M., and Watton, J. (2008), “Leakage and Groove Pressure of an Axial Piston Pump Slipper with Multiple Lands,” Tribology Transactions, 51(4), pp 469–482.
   Web of Science ®Google Scholar
• Devendran, R.S. and Vacca, A. (2013), “Optimal Design of Gear Pumps for Exhaust Gas after Treatment Applications,” Simulation Modelling Practice and Theory, 38, pp 1–19.
   Web of Science ®Google Scholar
• Wang, S., Sakurai, H., and Kasarekar, A. (2011), “The Optimal Design in External Gear Pumps and Motors,” IEEE/ASME Transactions on Mechatronics, 16(5), pp 945–952.
   Web of Science ®Google Scholar
• Ericson, L., Johansson, A., Ölvander, J., and Palmberg, J.-O. (2009), “Prediction and Optimisation of Audible Noise from Fluid Power Machines,” Proceedings of the Seventh International Conference on Fluid Power Transmission and Control, Hangzhou, China, April 7–10.
   Google Scholar
• Ericson, L., Ölvander, J., and Palmberg, J.-O. (2008), “On Optimal Design of Hydrostatic Machines,” Proceedings of 6th International Fluid Power Conference Dresden, IFK, Dresden, Germany. 31 March–2 April.
   Google Scholar
• Seeniraj, G.K. and Ivantysynova, M. (2009), “Multi-Objective Optimization Tool for Noise Reduction in Axial Piston Machines,” SAE International Journal of Commercial Vehicles, 1(1), pp 544–552.
   Google Scholar
• Ivantysynova, M. and Baker, J. (2009), “Power Loss in the Lubricating Gap between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines,” International Journal of Fluid Power, 10(2), pp 29–43.
   Google Scholar
• Vacca, A. and Guidetti, M. (2011), “Modelling and Experimental Validation of External Spur Gear Machines for Fluid Power Applications,” Simulation and Modeling Practice and Theory, 19, pp 2007–2031.
   Web of Science ®Google Scholar
• Jasak, H. and Weller, H.G. (2000), “Application of the Finite Volume Method and Unstructured Meshes to Linear Elasticity,” International Journal for Numerical Methods in Engineering, 48(2), pp 267–287.
   Web of Science ®Google Scholar
• Ivantysyn, J. and Ivantysynova, M. (2003), Hydrostatic Pumps and Motors, Technip Books International: New Delhi, India.
   Google Scholar
• Powell, M.J. (1970), “A Hybrid Method for Nonlinear Equations,” Numerical Methods for Nonlinear Algebraic Equations, 7, pp 87–114.
   Google Scholar
• Hamrock, B.J., Schmid, S.R., and Jacobson, B.O. (2004), Fundamentals of Fluid Film Lubrication, Vol. 58, New York: CRC Press.
   Google Scholar
• Zecchi, M., Vacca, A., and Casoli, P. (2010), “Numerical Analysis of the Lubricating Gap between Bushes and Gears in External Spur Gear Machines,” Proceedings of the ASME Symposium on Power Transmission and Motion Control. Bath, UK. 15–17 September.
   Google Scholar
• Vacca, A., Dhar, S., and Opperwall, T. (2011), “A Coupled Lumped Parameter and CFD Approach for Modeling External Gear Machines,” SICFP2011–The Twelfth Scandinavian International Conference on Fluid Power. Tampere, Finland. 18–23 May.
   Google Scholar
• Torczon, V. (1991), “On the Convergence of the Multidirectional Search Algorithm,” SIAM Journal on Optimization, 1(1), pp 123–145.
   Google Scholar
• Torczon, V. and Trosset, M.W. (1998), “From Evolutionary Operation to Parallel Direct Search: Pattern Search Algorithms for Numerical Optimization,” Computing Science and Statistics, 29, pp 396–401.
   Google Scholar
• Audet, C., Savard, G., and Zghal, W. (2008), “Multiobjective Optimization through a Series of Single-Objective Formulations,” SIAM Journal on Optimization, 19(1), pp 188–210.
   Web of Science ®Google Scholar
• Audet, C., Savard, G., and Zghal, W. (2010), “A Mesh Adaptive Direct Search Algorithm for Multiobjective Optimization,” European Journal of Operational Research, 204(3), pp 545–556.
   Web of Science ®Google Scholar