Comparison of Black Oxide and Tungsten Carbide–Reinforced Diamond-Like Carbon (WC/a-C:H) Surface Treatments for Rolling Element Bearings

REFERENCES

• Errichello, R., Budny, R., and Eckert, R. (2013), “Investigations of Bearing Failures Associated with White Etching Areas (WEAs) in Wind Turbine Gearboxes,” Tribology Transactions, 56(6), pp 1069–1076.
   Web of Science ®Google Scholar
• Kang, Y. S., Evans, R. D., and Doll, G. L. (2010), “Roller–Raceway Slip Simulations of Wind Turbine Gearbox Bearings Using Dynamic Bearing Model,” Proceedings of the STLE/ASME 2010 International Joint Tribology Conference (IJTC2010), San Francisco, CA, 17–20 October.
   Google Scholar
• Luyckx, J. (2011), “Hammering Wear Impact Fatigue Hypothesis WEC/irWEA Failure Mode on Roller Bearings,” Available at: http://www.nrel.gov/wind/pdfs/day2_sessioniv_3_hansen_luyckx.pdf (accessed 12 January 2015)
   Google Scholar
• Gregory, J. C. (1978), “Chemical Conversion Coatings of Metals to Resist Scuffing and Wear,” Tribology International, 11, pp 105–112.
   Web of Science ®Google Scholar
• Ludema, K. C. (1984), “A Review of Scuffing and Running-In of Lubricated Surfaces, with Asperities and Oxides in Perspective,” Wear, 100, pp 315–331.
   Web of Science ®Google Scholar
• Godfrey, D. (1999), “Iron Oxides and Rust (Hydrated Iron Oxides) in Tribology,” Lubrication Engineering, 55, pp 33–37.
   Google Scholar
• Mihailidis, A., Salpistis, C., Panagiotidis, K., Sachanas, C., Gatsios, S., Hoffinger, C., and Bakolas, V. (2010), “Wear and Smearing Resistance of Black Iron Mixed Oxide Coated Steels,” International Journal of Surface Science and Engineering, 4(4–6), pp 337–359.
   Web of Science ®Google Scholar
• Dimigen, H. and Hubsch, H. (1985), “Carbon-Containing Sliding Layer,” U.S. Patent No. 4, 525, 417.
   Google Scholar
• Sjostrom, H. and Wikstrom, V. (2001), “Diamond-Like Carbon Coatings in Rolling Contacts,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 215, pp 545–561.
   Google Scholar
• Doll, G. L., Ribaudo, C. R., and Evans, R. D. (2004), “Engineered Surfaces for Steel Rolling Element Bearings and Gears,” Materials Science & Technology Conference Proceedings, New Orleans, LA, 26–29 September.
   Google Scholar
• Scharf, T. W., Romanes, M. C., Mahdak, K. C., Hwang, J. Y., Banerjee, R., Evans, R. D., and Doll, G. L. (2008), “Atomic-Scale Structure and Composition of Tungsten Carbide Reinforced Diamondlike Carbon Films,” Applied Physics Letters, 93, 151909-1–151909-3.
   Web of Science ®Google Scholar
• Evans, R. D., Shiller, P. J., and Howe, J. Y. (2011), “Adhesion of Tungsten Carbide Reinforced Amorphous Hydrocarbon Thin Films (WC/a-C:H) to Steel Substrates for Tribological Applications,” Journal of Applied Physics, 109, 023518-1-023518-6.
   Web of Science ®Google Scholar
• Eckels, M., Kotzalas, M. N., and Doll, G. L. (2013), “Attaining High Levels of Bearing Performance with a Nanocomposite Diamond-Like Carbon Coating,” Tribology Transactions, 56, pp 410–416.
   Web of Science ®Google Scholar
• Evans, R. D., Barr, T. A., Houpert, L., and Boyd, S. V. (2013), “Prevention of Smearing Damage in Cylindrical Roller Bearings,” Tribology Transactions, 56, pp 703–716.
   Web of Science ®Google Scholar
• Baldwin, B. (2013), “Increasing Bearing Reliability in Main Shaft Support System,” Windpower Engineering & Development, 5(6), pp 38–42.
   Google Scholar
• Evans, R. D., Howe, J. Y., Bentley, J., Doll, G. L., and Glass, J. T. (2005), “Influence of Deposition Parameters on the Composition and Structure of Reactively Sputtered Nanocomposite TaC/a-C:H Thin Films,” Journal of Materials Research, 20(9), pp 2583–2596.
   Web of Science ®Google Scholar
• Strondl, C., Carvalho, N. M., De Hosson, J. Th. M., and Van der Kolk, G. J. (2003), “Investigation on the Formation of Tungsten Carbide in Tungsten-Containing Diamond Like Carbon Coatings,” Surface and Coatings Technology, 162, pp 288–293.
   Web of Science ®Google Scholar
• Oliver, W. C. and Pharr, G. M. (1992), “An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments,” Journal of Materials Research, 7(6), pp 1564–1583.
   Web of Science ®Google Scholar
• Hamrock, B. J. and Dowson, D. (1977), “Isothermal Elastodynamic Lubrication of Point Contacts, Part III—Fully Flooded Results,” Journal of Lubrication Technology, 99(2), pp 264–276.
   Web of Science ®Google Scholar
• Gnagy, J., Houpert, L., and Chevalier, F. (2012), “Rolling Bearing Stress Based Life—Part II: Experimental Calibration and Validation,” Journal of Tribology, 134, 021104-1–021104-8.
   Web of Science ®Google Scholar
• Evans, R. D. (2013), “Wear of Bearings,” Encyclopedia of Tribology, Wang, Q. J. and Chung, Y. W. ( Eds.), pp 4061–4068, Springer Science + Business Media: New York.
   Google Scholar
• Evans, R. D., More, K. L., Darragh, C. V., and Nixon, H. P. (2004), “Transmission Electron Microscopy of Boundary-Lubricated Bearing Surfaces. Part I: Mineral Oil Lubricant,” Tribology Transactions, 47, pp 430–439.
   Web of Science ®Google Scholar
• Archard, J. (1953), “Contact and Rubbing of Flat Surfaces,” Journal of Applied Physics, 24(8), pp 981–988.
   Web of Science ®Google Scholar
• Leyland, A. and Matthews, A. (2000), “On the Significance of the H/E Ratio in Wear Control: A Nanocomposite Coating Approach to Optimized Tribological Behavior,” Wear, 246, pp 1–11.
   Web of Science ®Google Scholar
• Berthier, Y., Godet, M., and Brendle, M. (1989), “Velocity Accommodation in Friction,” Tribology Transactions, 32, pp 490–496.
   Web of Science ®Google Scholar