Synergetic Lubricating Effect of WS₂ and Ti₃SiC₂ on Tribological Properties of Ni₃Al Matrix Composites at Elevated Temperatures

REFERENCES

• Berman, D., Erdemir, A., and Sumant, A. V. (2014), “Graphene: A New Emerging Lubricant,” Materials Today, 17 (1), pp 31–42.
   Web of Science ®Google Scholar
• Evans, D. C. and Senior, G. S. (1982), “Self-Lubricating Materials for Plain Bearing,” Tribology International, 15 (5), pp 243–248.
   Web of Science ®Google Scholar
• Prasad, S. V. and Mecklenburg, K. R. (1996), “Characterization of Third Bodies in Self-Lubricating Aluminum Metal-Matrix Composites by Electron Microprobe Analysis,” Tribology Transactions, 39 (2), pp 296–305.
   Web of Science ®Google Scholar
• Sierra, C. and Vazquez, A. J. (2006), “Dry Sliding Wear Behavior of Nickel Aluminides Coatings Produced by Self-Propagating High-Temperature Synthesis,” Intermetallics, 14 (7), pp 848–852.
   Web of Science ®Google Scholar
• Zhu, S. Y., Bi, Q. L., Kong, L. Q., Yang, J., and Liu, W. M. (2012), “Barium Chromates as a Solid Lubricants for Nickel Aluminum,” Tribology Transactions, 55 (2), pp 218–223.
   Web of Science ®Google Scholar
• Li, J. L., Xiong, D. S., Huang, Z. J., Kong, J., and Dai, J. H. (2009), “Effect of Ag and CeO2 on Friction and Wear Properties of Ni-Base Composite at High Temperature,” Wear, 267 (1), pp 576–584.
   Web of Science ®Google Scholar
• Sliney, H. E. (1982), “Solid Lubricant Materials for High Temperatures—A Review,” Tribology International, 15 (5), pp 303–315.
   Web of Science ®Google Scholar
• Ouyang, J. H., Li, Y. F., Wang, Y. M., Zhou, Y., Murakami, T., and Sasaki, S. (2009), “Microstructure and Tribological Properties of ZrO2 (Y2O3) Matrix Composites Doped with Different Solid Lubricants from Room Temperature to 800°C,” Wear, 267 (9), pp 1353–1360.
   Web of Science ®Google Scholar
• Dellacorte, C. (2000), “The Evaluation of a Modified Chrome Oxide Based High Temperature Solid Lubricant Coating for Foil Gas Bearings,” Tribology Transactions, 43 (2), pp 257–262.
   Web of Science ®Google Scholar
• Tyagi, R., Xiong, D. S., Li, J. L., and Dai, J. H. (2010), “Elevated Temperature Tribological Behavior of Ni Based Composites Containing Nano-Silver and hBN,” Wear, 269 (11), pp 884–890.
   Web of Science ®Google Scholar
• Zhu, S. Y., Bi, Q. L., Yang, J., Liu, W. M., and Xue, Q. J. (2011), “Ni3Al Matrix High Temperature Self-Lubricating Composites,” Tribology International, 44 (4), pp 445–453.
   Web of Science ®Google Scholar
• Yang, M. S., Liu, X. B., Fan, J. W., He, X. M., Shi, S. H., Fu, G. Y., Wang, M. D., and Chen, S. F. (2012), “Microstructure and Wear Behaviors of Laser Clad NiCr/Cr3C2-WS2 High Temperature Self-Lubricating Wear-Resistant Composite Coating,” Applied Surface Science, 258 (8), pp 3757–3762.
   Web of Science ®Google Scholar
• Shi, X. L., Wang, M., Xu, Z. S., Zhai, W. Z., and Zhang, Q. X. (2013), “Tribological Behavior of Ti3SiC2/(WC-10Co) Composites Prepared by Spark Plasma Sintering,” Materials & Design, 45, pp 365–376.
   Web of Science ®Google Scholar
• Zhang, Y., Ding, G. P., Zhou, Y. C., and Cai, B. C. (2002), “Ti3SiC2—A Self-Lubricating Ceramic,” Materials Letters, 55 (5), pp 285–289.
   Web of Science ®Google Scholar
• Shi, X. L., Zhai, W. Z., Wang, M., Xu, Z. S., Yao, J., Song, S. Y. and Zhang, Q. X. (2014), “Tribological Behaviors of NiAl-Ti3SiC2 Self-Lubricating Composites at Elevated Temperatures,” Tribology Transactions, 57 (4), pp 589–602.
   Web of Science ®Google Scholar
• Barsoum, M. W., El-Raghy, T., and Ogbuji, L. U. (1997), “Oxidation of Ti3SiC2 in Air,” Journal of the Electrochemical Society, 144 (7), pp 2508–2516.
   Web of Science ®Google Scholar
• Peng, M. C., Shi, X. L., Zhu, Z. W., Wang, M., and Zhang, Q. X. (2012), “Facile Synthesis of Ti3SiC2 Powder by High Energy Ball-Milling and Vacuum Pressureless Heat-Treating Process from Ti-TiC-SiC-Al Powder Mixtures,” Ceramics International, 38 (3), pp 2027–2033.
   Web of Science ®Google Scholar
• American Society for Testing and Materials. (2013), “Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle,” ASTM B962–13.
   Google Scholar
• American Society for Testing and Materials. (2013), “Standard Test Methods for Knoop and Vickers Hardness of Materials,” ASTM E384–11e1.
   Google Scholar
• American Society for Testing and Materials. (2005), “Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus,” ASTM G99–05.
   Google Scholar
• Yang, J., Gu, W., Pan, L. M., Song, K., Chen, X., and Qiu, T. (2011), “Friction and Wear Properties of in situ (TiB2 + TiC)/Ti3SiC2 Composites,” Wear, 271 (11), pp 2940–2946.
   Web of Science ®Google Scholar
• Chhowalla, M. and Amaratunga, G. A. J. (2000), “Thin Films of Fullerene-Like MoS2 Nanoparticles with Ultra-Low Friction and Wear,” Nature, 407 (6801), pp 164–167.
   PubMed Web of Science ®Google Scholar
• Stott, F. H., Lin, D. S., and Wood, G. C. (1973), “Glazes” Produced on Nickel-Base Alloys during High Temperature Wear,” Nature, 242 (118), pp 75–77.
   Web of Science ®Google Scholar
• Stott, F. H., Lin, D. C., and Wood, G. C. (1973), “Structure and Mechanism of Formation of the ‘Glaze’ Oxide Layers Produced on Ni-Based Alloys during Wear at High Temperatures,” Corrosion Science, 13 (6), pp 449–469.
   Web of Science ®Google Scholar
• Stott, F. H. (1998), “The Role of Oxidation in the Wear of Alloys,” Tribology International, 31 (1), pp 61–71.
   Web of Science ®Google Scholar
• Li, S. B., Xie, J. X., Zhang, L. T., and Cheng, L. F. (2003), “Mechanical Properties and Oxidation Resistance of Ti3SiC2/SiC Composite Synthesized by in situ Displacement Reaction of Si and TiC,” Materials Letters, 57 (20), pp 3048–3056.
   Web of Science ®Google Scholar
• Kooi, B. J., Poppen, R. J., Carvalho, N. J. M., De Hosson, J. T. M., and Barsoum M. W. (2003), “Ti3SiC2: A Damage Tolerant Ceramic Studied with Nano-Indentations and Transmission Electron Microscopy,” Acta Materialia, 51 (10), pp 2859–2872.
   Web of Science ®Google Scholar
• Zhai, H. X., Huang, Z. Y., and Ai, M. X. (2006), “Tribological Behaviors of Bulk Ti3SiC2,” Materials Science and Engineering A, 435>–436, pp 360–370.
   Web of Science ®Google Scholar
• Zhu, S. Y., et al. (2012), “Tribological Behavior of NiAl Matrix Composites with Addition of Oxides at High Temperatures,” Wear, 274–275, pp 423–434.Please provide all author names, reference 29
   Web of Science ®Google Scholar
• Rigney, D. A. (1997), “Comments on the Sliding Wear of Metals,” Tribology International, 30 (5), pp 361–367.
   Web of Science ®Google Scholar
• Kolubaev, A., Tarasov, S., Sizova, O., and Kolubaev E. (2010), “Scale-Dependent Subsurface Deformation of Metallic Materials in Sliding,” Tribology International, 43 (4), pp 695–699.
   Web of Science ®Google Scholar
• Tang, H. B., Fang, Y. L., and Wang, H. M. (2004), “Microstructure and Dry Sliding Wear Resistance of a Cr13Ni5Si2 Ternary Metal Silicide Alloy,” Acta Materialia, 52 (7), pp 1773–1783.
   Web of Science ®Google Scholar
• Panin, V., Kolubaev, A., Tarasov, S., and Popov, V. (2001), “Subsurface Layer Formation during Sliding Friction,” Wear, 249 (10), pp 860–867.
   Web of Science ®Google Scholar
• Li, S. B., Cheng, L. F., and Zhang, L. T. (2003), “The Morphology of Oxides and Oxidation Behavior of Ti3SiC2-Based Composite at High-Temperature,” Composites Science and Technology, 63 (6), pp 813–819.
   Web of Science ®Google Scholar