REFERENCES
- Kawasaki, A. and Watanabe, R. (1997), “Concept and P/M Fabrication of Functionally Gradient Materials,” Ceramics International, 23, pp 73–83.
- Suresh, S. (2001), “Graded Materials for Resistance to Contact Deformation and Damage,” Science, 292, pp 2447–2451.
- Navas, E. M. R., Ganorcia, R., Gordo, E., and Velasco, F. J. (2003), “Development and Characterization of High-Speed Steel Matrix Composites Gradient Materials,” Journal of Materials Processing Technology, 143–144, pp 769–775.
- Arslan, G., Janssen, R., and Claussen, N. (2005), “Processing and Characterization of Three-Layer Alumina-Based Composites with Enhanced Damage Tolerance,” Journal of the European Ceramics Society, 25, pp 3553–3561.
- Farid, A. and Guo, S. (2007), “On the Processing, Microstructure, Mechanical and Wear Properties of Cermet/Stainless Steel Layer Composites,” Acta Materialia, 55, pp 1467–1477.
- Zarghani, A. S., Bozorg, S. F. K., and Hanzaki, A. Z. (2009), “Microstructures and Mechanical Properties of Al/Al2O3 Surface Nanocomposite Layer Produced by Friction Stir Processing,” Materials Science and Engineering A, 500, pp 84–91.
- Barmouz, M., Asadi, P., Givi, M. K. B., and Taherishargh, M. (2011), “Investigation of Mechanical Properties of Cu/SiC Composite Fabricated by FSP: Effect of SiC Particles Size and Volume Fraction,” Materials Science and Engineering A, 528, pp 1740–1749.
- Halverson, D. C., Snowden, W. E., Pyzik, A. J., and Aksay, I. A. (1989), “Processing of Boron Carbide–Aluminum Composites,” Journal of the American Ceramics Society, 72(5), pp 775–780.
- Kumar, S. P., Manisekar, K., and Narayanasamy, R. (2014), “Experimental and Prediction of Abrasive Wear Behavior of Sintered Cu-SiC Composites Containing Graphite by Using Artificial Neural Networks,” Tribology Transactions, 57(3), pp 455–471.
- Fan, Y., Matějka, V., Kratošová, G., and Lu, Y. (2008), “Role of Al2O3 in Semi-Metallic Friction Materials and Its Effects on Friction and Wear Performance,” Tribology Transactions, 51(6), pp 771–778.
- Lloyd, D. J. (1994), “Particle Reinforced Aluminium and Mg Matrix Composites,” International Materials Reviews, 39(1), pp 1–39.
- Thevenot, F. (1990), “Boron Carbide—A Comprehensive Review,” Journal of the European Ceramics Society, 6, pp 205–225.
- Öztürk, B., Öztürk, S., and Adigüzel, A. A. (2013), “Effect of Type and Relative Amount of Solid Lubricants and Abrasives on the Tribological Properties of Brake Friction Materials,” Tribology Transactions, 56(3), pp 428–441.
- Senthilkumar, V. and Reddy, M. C. (2012), “Performance Analysis of Cu-B4C Metal Matrix Composite as an EDM Electrode,” International Journal of Machining and Machinability of Materials, 11(1), pp 36–50.
- Baradeswaran, A. and Perumal, A. E. (2015), “Effect of Graphite on Tribological and Mechanical Properties of AA7075 Composites,” Tribology Transactions, 58(1), pp 1–6.
- Senthil Kumar, P., Manisekar, K., Subramanian, E., and Narayanasamy, R. (2014), “Dry Sliding Friction and Wear Characteristics of Cu-Sn Alloy Containing Molybdenum Disulfide,” Tribology Transactions, 56(5), pp 857–866.
- Nayak, D., Ray, N., Sahoo, R., and Debata, M. (2014), “Analysis of Tribological Performance of Cu Hybrid Composites Reinforced with Graphite and TiC Using Factorial Techniques,” Tribology Transactions, 57(5), pp 908–918.
- Karslioglu, R., Uysal, M., Alp, A., and Akbulut, H. (2010), “Wear Behavior of Bronze Hybrid MMCs Coatings Produced by Current Sintering on Steel Substrates,” Tribology Transactions, 53(5), pp 779–785.
- Prabhu, T. R., Varma, V. K., and Vedantam, S. (2014), “High Speed Tribological and Mechanical Properties of Layered Fe/SiC Composites,” Journal of Materials Engineering and Performance, 23(10), pp 3666–3679.
- Prabhu, T. R., Varma, V. K., and Vedantam, S. (2014), “Effect of Reinforcement Type, Size, and Volume Fraction on the Tribological Behavior of Fe Matrix Composites at High Sliding Speed Conditions,” Wear, 309, pp 247–255.
- El-Kady, O. and Fathy, A. (2014), “Effect of SiC Particle Size on the Physical and Mechanical Properties of Extruded Al Matrix Nano Composites,” Materials & Design, 54, pp 348–353.
- Yue, X. Y., Wang, J., Li, Y., and Ru, H. (2013), “Properties of B4C /Al-B4C Composite with a Two-Layer Structure,” Materials Research Bulletin, 48, pp 1720–1724.
- Leon, L. M., Jr. (2006), “Functionally Gradient Metal Matrix Composites: Numerical Analysis of the Microstructure–Strength Relationships,” Composites Science and Technology, 66, pp 1873–1887.
- Suh, Y. S., Joshi, S. P., and Ramesh, K. T. (2009), “An Enhanced Continuum Model for Size-Dependent Strengthening and Failure of Particle-Reinforced Composites,” Acta Materialia, 57, pp 5848–5861.
- Chawla, N. and Shen, Y. L. (2001), “Mechanical Behavior of Particle Reinforced Metal Matrix Composites,” Advanced Engineering Materials, 3(6), pp 357–370.
- Dai, L. H., Ling, Z., and Bai, Y. L. (2001), “Size-Dependent Inelastic Behavior of Particle-Reinforced Metal-Matrix Composites,” Composites Science and Technology, 61, pp 1057–1063.
- Drucker, D. C. (1966), “The Continuum Theory of Plasticity on the Macro Scale and the Micro Scale,” Journal of Materials, 1(4), pp 873–910.
- Mortensen, A. and Llorca, J. (2010), “Metal Matrix Composites,” Annual Reviews in Materials Research, 40, pp 243–270.
- Arsenault, R. J., Fishman, S., and Taya, M. (1994), “Deformation and Fracture Behavior of Metal–Ceramic Matrix Composite Materials,” Progress in Materials Science, 38, pp 1–157.
- Hunt, W. H., Jr., Osman, T., and Lewandowski, J. J. (1993), “Structure–Property Relations in Discontinuously Reinforced Aluminum (DRA) Alloys,” Journal of Occupational Medicine, 45, pp 30–35.
- Ohashi, Y., Wolfenstine, J., Koch, R., and Sherby, O. D. (1992), “Fracture Behavior of a Laminated Steel–Brass Composite in Bend Tests,” Materials Science and Engineering A, 151, pp 37–44.
- Hassan, H. A. (2011), “Effect of Mixed Mode I/II on Fracture Behavior of laminated Metal Matrix Composites,” Materials Science and Technology, 27(7), pp 1170–1176.
- Zechner, J. and Kolednik, O. (2013), “Fracture Resistance of Aluminum Multilayer Composites,” Engineering Fracture Mechanics, 110, pp 489–500.
- Mummery, P. and Derby, B. (1991), “The Influence of Microstructure on the Fracture Behavior of Particle Metal Matrix Composites,” Materials Science and Engineering A, 135, pp 221–224.
- Deuis, R. L., Subramanian, C., and Yellup, J. M. (1997), “Dry Sliding Wear of Aluminium Composites—A Review,” Composites Science and Technology, 57, pp 415–435.
- Chen, Q. and Li, D. Y. (2005), “A Computational Study of Frictional Heating and Energy Conversion during Sliding Processes,” Wear, 259, pp 1382–1391.
- Zum Gahr, K. M. (1979), “How Microstructure Affects Abrasive Wear-Resistance,” Metal Progress, 116(4), pp 46–52.
- Chung, S. and Hwang, B. H. (1994), “A Microstructural Study of the Wear Behavior of SiCp/Al Composites,” Tribology International, 27, pp 307–314.