472
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

Design of Spur Gears Using Profile Modification

, &
Pages 736-744 | Received 03 Nov 2014, Accepted 17 Jan 2015, Published online: 26 May 2015

REFERENCES

  • Nabih, F. J., Cavoret, V., and Philippe, V. (2013), “Gear Tooth Pitting Modelling and Detection Based on Transmission Error Measurements,” European Journal of Computational Mechanics, 22(2–4), pp 106–119.
  • Ruben, D. C., Luis, J. A., Miguel, A., Diaz, A., and Jose, A. (2010), “Analysis of Stress Due to Contact between Spur Gears,” International Conference of Advances in Computational Intelligence, Man–Machine Systems and Cybernetics, Dec 14–16, Venezuela, pp 216–220.
  • Stachowiak, G. W. and Batchelor, A. W. (2005), Engineering Tribology, 4th ed., Taylor & Francis.
  • Miryam, B., Sanchez, J. P. I., and Miguel, P. (2013), “Contact Stress Calculation of High Transverse Contact Ratio Spur and Helical Gear Teeth,” Mechanism and Machine Theory, 64, pp 93–110.
  • Valentin, O. (2008), “Tooth Wear Modeling and Prognostication Parameters of Engagement of Spur Gear Power Transmissions,” Mechanism and Machine Theory, 43(12), pp 1639–1664.
  • Hayrettin, D. (2009), “PA66 Spur Gear Durability with Tooth Width Modification,” Materials and Design, 30, pp 1060–1067.
  • Fatih, K. and Stephen, E. O. (2008), “Influence of Tip Relief Modification on the Wear of Spur Gears with Asymmetric Teeth,” Tribology Transactions, 51(5), pp 581–588.
  • Ali, R. H. (2009), “Contact Stress Analysis of Spur Gear Teeth Pair,” World Academy of Science, Engineering and Technology, 3(10), pp 587–592.
  • Sfakiotakis, V. G., Vaitsis, J. P., and Anifantis, N. K. (2001), “Numerical Simulation of Conjugate Spur Gear Action,” Computers and Simulation, 79(12), pp 1153–1160.
  • Johnson, K. L. (1985), Contact Mechanics, Taylor & Francis.
  • BS ISO 6336-2. (1996), “Calculation of Load Capacity of Spur and Helical Gears, Part 2: Calculation of Surface Durability (Pitting).”
  • Shuting, L. (2007), “Finite Element Analyses for Contact Strength and Bending Strength of a Pair of Spur Gears with Machining Errors, Assembly Errors and Tooth Modifications,” Mechanisms and Machine Theory, 42(1), pp 1–27.
  • Anders, F. and Soren, A. (2001), “A Simplified Model for Wear Prediction in Helical Gears,” Wear, 249(3–4), pp 285–292.
  • Amarnath, M. and Sujatha, C. (2014), “Surface Contact Fatigue Failure Assessment in Spur Gears Using Lubricant Film Thickness and Vibration Signal Analysis,” Tribology Transactions, 58(2), pp 327–336.
  • Li, S. and Kahraman, A. (2010), “Prediction of Spur Gear Mechanical Power Losses Using a Transient Elastohydrodynamic Lubrication Model,” Tribology Transactions, 53(4), pp 554–563.
  • Aslantas, K. and Tasgetiren, S.(2004), “A Study of Spur Gear Pitting Formation and Life Prediction,” Wear, 256(11), pp 1167–1175.
  • Dimitrov, L., Michalopoulos, D., and Apostolopoulus, T. D. N. (2009), “Investigation of Contact Fatigue of High Strength Steel Gears Subjected to Surface Treatment,” Journal of Materials Engineering and Performance, 18(7), pp 939–946.
  • Errichello, R. L. (2012), “Morphology of Micropitting,” Gear Technology, 4, pp 74–81.
  • Fernandes, P. J. L. and Mcduling, C. (1997), “Surface Contact Fatigue in Gears,” Engineering Failure Analysis, 4(2), pp 99–107.
  • Gitin, M. M. (2011), Handbook of Gear Design, 2nd ed., Taylor & Francis: New Delhi.
  • Joze, H. and Gorazd, H. (2008), Constructive Measures to Increase the Load-Carrying Capacity of Gears: The Characteristics of S-Gears, Faculty of Technical Sciences, University of Ljubljana, Novi Sad, Serbia.
  • Marco, A. M., Fabio, K., Urbano, R., and Carlos, H. S. (2012), “The Influence of Contact Stress Distribution and Specific Film Thickness on the Wear of Spur Gears during Pitting Tests,” Journal of Braz. Society of Mechanical Science and Engineering, 34(2), pp 135–144.
  • Michele, C. and Giuseppe, D. (1999), “Numerical Methods for the Optimization of Specific Sliding, Stress Concentration and Fatigue Life of Gears,” International Journal of Fatigue, 21(5), pp 465–474.
  • Moldovan, Gh., Velicu, D., and Velicu, R. (2007), “On the Maximal Contact Stress for Cylindrical Gears,” 12th IFToMM World Congress, Besancon, France, June 18–27.
  • Sachidananda, H. K., Joseph, G., and Prakash, H. R. (2012), “Analysis of Contact Stresses in Altered Tooth-Sum Spur Gearing,” Journal of Applied Mechanical Engineering, 1(1), pp 1–5.
  • Sachidananda, H. K., Joseph, G., and Prakash, H. R. (2012), “Experimental Investigation of Fatigue Behavior of Spur Gear in Altered Tooth-Sum Gearing,” Frontiers of Mechanical Engineering, 7(3), pp 268–278.
  • Sheng, L. and Ahmet, K. (2011), “A Fatigue Model for Contacts under Mixed Elastohydrodynamic Lubrication Condition,” International Journal of Fatigue, 33(3), pp 427–436.
  • Singh, A., Houser, D. R., and Vijayakar, S. (1996), “Early Detection of Gear Pitting,” ASME Power Transmission and Gearing Conference, 88, pp 673–678.
  • Vera, N. S. and Ivana, C. (2003). “The Analysis of Contact Stress on Meshed Teeth's Flanks along the Path of Contact for a Tooth Pair,” Mechanics, Automatic Control and Robotics, 3(15), pp 1055–1066.
  • William, J. and Richard, S. (2005), “Rolling Contact Fatigue of Surface Densified FLN2-4405,” International Journal of Powder Metallurgy, 41(3), pp 49–61.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.