REFERENCES
- Taylor, R. I. (2012), “Tribology and Energy Efficiency: From Molecules to Lubricated Contacts to Complete Machines,” Faraday Discussions, 156(1), pp 361–382.
- Oliver, D. R., Bakhtiyarov, S. I., and Shahidullah, M. (1983), “External Near-Contact of Sliding Cylinders: Polymer Solutions Give Increased Load and Reduced Friction Coefficient,” Journal of Non-Newtonian Fluid Mechanics, 12(3), pp 269–282.
- Tao, F. F. and Philippoff, W. (1967), “Hydrodynamic Behavior of Viscoelastic Liquids in a Simulated Journal Bearing,” ASLE Transactions, 10(3), pp 302–315.
- Williamson, B. P., Walters, K., Bates, T. W., Coy, R. C., and Milton, A. L. (1997), “The Viscoelastic Properties of Multigrade Oils and Their Effect on Journal-Bearing Characteristics,” Journal of Non-Newtonian Fluid Mechanics, 73(1), pp 115–126.
- Williamson, B. P. and Milton, A. (1995), “Characterization of the Viscoelasticity of Engine Lubricants at Elevated Temperatures and Shear Rates,” SAE Paper 951032.
- Bair, S. and Qureshi, F. (2014), “Time–Temperature–Pressure Superposition in Polymer Thickened Liquid Lubricants,” Journal of Tribology, 136(2), p 021505.
- Jakobsen, J. and Winer, W. O. (1975), “High Shear Stress Behavior of Some Representative Lubricants,” Journal of Tribology, 97(3), pp 479–485.
- Bair, S. and Qureshi, F. (2002), “Accurate Measurements of Pressure–Viscosity Behavior in Lubricants,” Tribology Transactions, 45(3), pp 390–396.
- Laesecke, A. and Bair, S. (2011), “High-Pressure Viscosity Measurements of 1,1,1,2-Tetrafluoroethane,” International Journal of Thermophysics, 32(5), pp 925–941.
- Bair, S. S. (2007), High Pressure Rheology for Quantitative Elastohydrodynamics, Tribology and Interface Engineering Series, Vol. 54. Taylor & Francis.
- Bair, S., Lockwood, F. E., Anderson, W. B., Zhang, Z., and Dotson, D. (2007), “Measurements of Elasticity in Multigrade Motor Oil at Elevated Pressure,” Tribology Transactions, 50(3), pp 407–414.
- Macosko, C. W. (1994), Rheology: Principles, Measurements, and Applications, Taylor & Francis: New York.
- Tanner, R. I. (2002), Engineering Rheology, 2nd ed., Taylor & Francis: Oxford, UK.
- Schultheisz, C. R. and Leigh, S. D. (2002), “Certification of the Rheological Behavior of SRM 2490, Polyisobutylene Dissolved in 2,6,10,14-Tetramethylpentadecane,” NIST Special Publication, 260(143), pp 2–27.
- Bair, S. (2004), “A Rough Shear-Thinning Correction for EHD Film Thickness,” Tribology Transactions, 47(3), pp 361–365.
- Habchi, W., Bair, S., Qureshi, F., and Covitch, M. (2013), “A Film Thickness Correction Formula for Double-Newtonian Shear-Thinning in Rolling EHL Circular Contacts,” Tribology Letters, 50(1), pp 59–66.
- Han, C. D. and Jhon, M. S. (1986), “Correlations of the First Normal Stress Difference with Shear Stress and of the Storage Modulus with Loss Modulus for Homopolymers,” Journal of Applied Polymer Science, 32(3), pp 3809–3840.
- Abdel-Khalik, S. I., Hassager, O., and Bird, R. B. (1974), “Prediction of Melt Elasticity from Viscosity Data,” Polymer Engineering & Science, 14(12), pp 859–867.
- Glei⇓le, W. (1982), “Stresses in Polymer Melts at the Beginning of Flow Instabilities (Melt Fracture) in Cylindrical Capillaries,” Rheologica Acta, 21(4–5), pp 484–487.
- Bair, S., Vergne, P., and Querry, M. (2005), “A Unified Shear-Thinning Treatment of Both Film Thickness and Traction in EHD,” Tribology Letters, 18(2), pp 145–152.
- Wagner, M. H. (1977), “Prediction of Primary Normal Stress Difference from Shear Viscosity Data Using a Single Integral Constitutive Equation,” Rheologica Acta, 16(1), pp 43–50.
- Bair, S. (1996), “Normal Stress Difference in Liquid Lubricants Sheared under High Pressure,” Rheologica Acta, 35(1), pp 13–23.