REFERENCES
- Rajmohan, T., Palanikumar, K., and Ranganathan, S. (2013), “Evaluation of Mechanical and Wear Properties of Hybrid Aluminium Matrix Composites,” Transactions of Nonferrous Metals Society of China, 23(9), pp 2509–2517.
- Mordyuk, B. N., Prokopenko, G. I., Milman, Y. V., Iefimov, M. O., Grinkevych, K. E., Sameljuk, A. V. and Tkachenko, I. V. (2014), “Wear Assessment of Composite Surface Layers in Al–6Mg Alloy Reinforced with AlCuFe Quasicrystalline Particles: Effects of Particle Size, Microstructure and Hardness,” Wear, 319(1–2), pp 84–95.
- Beygi, H., Sajjadi, S. A., and Zebarjad, S. M. (2014), “Microstructural Analysis and Mechanical Characterization of Aluminum Matrix Nanocomposites Reinforced with Uncoated and Cu-Coated Alumina Particles,” Materials Science and Engineering A, 607, pp 81–88.
- Saravanan, S. D., Senthilkumar, M., and Shankar, S. (2013), “Effect of Particle Size on Tribological Behavior of Rice Husk Ash–Reinforced Aluminum Alloy (AlSi10Mg) Matrix Composites,” Tribology Transactions, 56(6), pp 1156–1167.
- Alaneme, K. K., Akintunde, I. B., Olubambi, P. A., and Adewale, T. M. (2013), “Fabrication Characteristics and Mechanical Behaviour of Rice Husk Ash–Alumina Reinforced Al-Mg-Si Alloy Matrix Hybrid Composites,” Journal of Materials Research and Technology, 2(1), pp 60–67.
- Hipke, T., Hohlfeld, J., and Rybandt, S. (2014), “Functionally Aluminum Foam Composites for Building Industry,” Procedia Materials Science, 4, pp 127–132.
- Liu, Z. Y., Xiao, B. L., Wang, W. G., and Ma, Z. Y. (2013), “Developing High-Performance Aluminum Matrix Composites with Directionally Aligned Carbon Nanotubes by Combining Friction Stir Processing and Subsequent Rolling,” Carbon, 62, pp 35–42.
- Surappa, M. K. (2003), “Aluminium Matrix Composites : Challenges and Opportunities,” Sadhana, 28(1–2), pp 319–334.
- Stein, J., Lenczowski, B., Fréty, N., and Anglaret, E. (2012), “Mechanical Reinforcement of a High-Performance Aluminium Alloy AA5083 with Homogeneously Dispersed Multi-Walled Carbon Nanotubes,” Carbon, 50(6), pp 2264–2272.
- Yang, Q., Liu, J., Li, S., Wang, F., and Wu, T. (2014), “Fabrication and Mechanical Properties of Cu-Coated Woven Carbon Fibers Reinforced Aluminum Alloy Composite,” Materials & Design, 57, pp 442–448.
- Sahoo, R., Mantry, S., Sahoo, T. K., Mishra, S., and Jha, B. B. (2013), “Effect of Microstructural Variation on Erosion Wear Behavior of Ti-6Al-4V Alloy,” Tribology Transactions, 56(4), pp 555–560.
- Singh, S., Gupta, D., Jain, V., and Sharma, A. (2014), “Microwave Processing of Materials and Applications in Manufacturing Industries: A Review,” Materials and Manufacturing Processes, 30, pp 1–29.
- Singh, S., Singh, I., Dvivedi, A., and Davim, J. P. (2014), “SiCp-Reinforced Al6063 MMCs: Mechanical Behavior and Microstructural Analysis.” Proceedings of the International Conference on Research and Innovations in Mechanical Engineering, Khangura, S.S., Singh, P., Singh, H., Brar, G.S. (Eds.), pp 451–464, Taylor & Francis.
- Hashim, J., Looney, L., and Hashmi, M. S. J. (1999), “Metal Matrix Composites: Production by the Stir Casting Method,” Journal of Materials Processing Technology, 92–93, pp 1–7.
- Ezatpour, H. R., Sajjadi, S. A., Sabzevar, M. H., and Huang, Y. (2014), “Investigation of Microstructure and Mechanical Properties of Al6061-Nanocomposite Fabricated by Stir Casting,” Materials & Design, 55, pp 921–928.
- Niranjan, K. and Lakshminarayanan, P. R. (2013), “Dry Sliding Wear Behaviour of in situ Al–TiB2 Composites,” Materials & Design, 47, pp 167–173.
- Yigezu, B. S., Jha, P. K., and Mahapatra, M. M. (2013), “Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of in situ Synthesized Al–12%Si/TiC Composites,” Tribology Transactions, 56(4), pp 546–554.
- Ravindran, P., Manisekar, K., Narayanasamy, R., and Narayanasamy, P. (2013), “Tribological Behaviour of Powder Metallurgy-Processed Aluminium Hybrid Composites with the Addition of Graphite Solid Lubricant,” Ceramics International, 39(2), pp 1169–1182.
- Ravindran, P., Manisekar, K., Rathika, P., and Narayanasamy, P. (2013), “Tribological Properties of Powder Metallurgy–Processed Aluminium Self Lubricating Hybrid Composites with SiC Additions,” Materials & Design, 45, pp 561–570.
- Rajkumar, K. and Aravindan, S. (2013), “Tribological Behavior of Microwave Processed Copper–Nanographite Composites,” Tribology International, 57, pp 282–296.
- Suresha, S. and Sridhara, B. K. (2010), “Effect of Addition of Graphite Particulates on the Wear Behaviour in Aluminium–Silicon Carbide–Graphite Composites,” Materials & Design, 31(9), pp 1804–1812.
- Kumar, R. and Dhiman, S. (2013), “A Study of Sliding Wear Behaviors of Al-7075 Alloy and Al-7075 Hybrid Composite by Response Surface Methodology Analysis,” Materials & Design, 50, pp 351–359.
- Koksal, S., Ficici, F., Kayikci, R., and Savas, O. (2012), “Experimental Optimization of Dry Sliding Wear Behavior of in situ AlB2/Al Composite Based on Taguchi's Method,” Materials & Design, 42, pp 124–130.
- Singh, S., Singh, G., Kumar, L., and Singh, S. (2014), “Microstructural Analysis and Tribological Behavior of Aluminium Alloy Reinforced with Hybrid Alumina/Nanographite Particles,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 229(5), pp 597–608.
- Gibson, P. R., Clegg, A. J., and Davis, A. A. (1984), “Wear of Cast Al-Si Alloys Containing Graphite,” Wear, 95, pp 193–198.
- Krishna, U. B. G., Rao, K. V. S., and Vasudeva, B. (2013), “Effect of Boron Carbide Reinforcement on Aluminium Matrix Composites,” International Journal of Metallurgical & Materials Science and Engineering, 3(1), pp 41–48.
- Trehan, R., Singh, S., and Garg, M. (2013), “Optimization of Mechanical Properties of Polyester Hybrid Composite Laminate Using Taguchi Methodology—Part 1,” Proceedings of the Institution of Mechanical Engineers - Part L: Journal of Materials: Design and Applications.
- Sharma, A., Garg, M., and Singh, S. (2015), “Taguchi Optimization of Tribological Properties of Al/Gr/B4C Composite,” Industrial Lubrication and Tribology, 67(4).
- Mahapatra, S. S. and Patnaik, A. (2006), “Optimization of Wire Electrical Discharge Machining (WEDM) Process Parameters Using Taguchi Method,” International Journal of Advanced Manufacturing Technology, 34(9–10), pp 911–925.