Performance of Hydrostatic Textured Thrust Bearing with Supply Holes Operating with Non-Newtonian Lubricant

References

• Kligerman, Y. and Etsion, I. (2001), “Analysis of the Hydrodynamic Effects in a Surface Textured Circumferential Gas Seal,” Tribology Transactions, 44(3), pp 472–478.
   Web of Science ®Google Scholar
• Brizmer, V., Kligerman, Y., and Etsion, I. (2003), “A Laser Surface Textured Parallel Thrust Bearing,” Tribology Transactions, 46(3), pp 397–403.
   Web of Science ®Google Scholar
• Pettersson, U. and Jacobson, S. (2003), “Influence of Surface Texture on Boundary Lubricated Sliding Contacts,” Tribology International, 36(11), pp 857–864.
   Web of Science ®Google Scholar
• Ryk, G., Kligerman, Y., and Etsion, I. (2002), “Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components,” Tribology Transactions, 45(4), pp 444–449.
   Web of Science ®Google Scholar
• Etsion, I., Halperin, G., Brizmer, V., and Kligerman, Y. (2004), “Experimental Investigation of Laser Surface Textured Parallel Thrust Bearings,” Tribology Letters, 17(2), pp 295–300.
   Web of Science ®Google Scholar
• Ronen, A., Etsion, I., and Kligerman, Y. (2001), “Friction-Reducing Surface-Texturing in Reciprocating Automotive Components,” Tribology Transactions, 44(3), pp 359–366.
   Web of Science ®Google Scholar
• Nakano, M., Korenaga, A., Korenaga, A., Miyake, K., Murakami, T., Ando, Y., Usami, H., and Sasaki, S. (2007), “Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient under Lubricated Conditions,” Tribology Letters, 28(2), pp 131–137.
   Web of Science ®Google Scholar
• Hamilton, D.B., J.A. Walowit, and C.M. Allen, A Theory of Lubrication by Microirregularities. Journal of Basic Engineering, 1966. 88(1): p. 177–185.
   Google Scholar
• Etsion, I. and Burstein, L. (1996), “A Model for Mechanical Seals with Regular Microsurface Structure,” Tribology Transactions, 39(3), pp 677–683.
   Web of Science ®Google Scholar
• Kligerman, Y., Etsion, I., and Shinkarenko, A. (2005), “Improving Tribological Performance of Piston Rings by Partial Surface Texturing,” Journal of Tribology, 127(3), pp 632–638.
   Web of Science ®Google Scholar
• Buscaglia, G. C., Ciuperca, I., and Jai, M. (2005), “The Effect of Periodic Textures on the Static Characteristics of Thrust Bearings,” Journal of Tribology, 127(4), pp 899–902.
   Web of Science ®Google Scholar
• Feldman, Y., Kligerman, Y., Etsion, I., and Haber, S. (2006), “The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces,” Journal of Tribology, 128(2), pp 345–350.
   Web of Science ®Google Scholar
• Qiu, M., Bailey, B. N., Stoll, R., and Raeymaekers, B. (2014), “The Accuracy of the Compressible Reynolds Equation for Predicting the Local Pressure in Gas-Lubricated Textured Parallel Slider Bearings,” Tribology International, 72, pp 83–89.
   PubMed Web of Science ®Google Scholar
• Kango, S., Sharma, R., and Pandey, R. (2014), “Thermal Analysis of Microtextured Journal Bearing Using Non-Newtonian Rheology of Lubricant and JFO Boundary Conditions,” Tribology International, 69, pp 19–29.
   Web of Science ®Google Scholar
• Qiu, Y. and Khonsari, M. (2009), “On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm,” Journal of Tribology, 131(4), pp 041702.
   Web of Science ®Google Scholar
• Qiu, Y. and Khonsari, M. (2011), “Performance Analysis of Full-Film Textured Surfaces with Consideration of Roughness Effects,” Journal of Tribology, 133(2), pp 021704.
   Web of Science ®Google Scholar
• Fesanghary, M. and Khonsari, M. (2011), “A Modification of the Switch Function in the Elrod Cavitation Algorithm,” Journal of Tribology, 133(2), pp 024501.
   Web of Science ®Google Scholar
• Wang, H., Yang, S., and Guo, F. (2011), “Modeling of a Grooved Parallel Bearing with a Mass-Conserving Cavitation Algorithm,” Tribology Transactions, 54(2), pp 227–236.
   Web of Science ®Google Scholar
• Gadeschi, G. B., Backhaus, K., and Knoll, G. (2012), “Numerical Analysis of Laser-Textured Piston-Rings in the Hydrodynamic Lubrication Regime,” Journal of Tribology, 134(4), pp 041702.
   Web of Science ®Google Scholar
• Sharma, S. C. and Yadav, S. K. (2014), “Performance Analysis of a Fully Textured Hybrid Circular Thrust Pad Bearing System Operating with Non-Newtonian Lubricant,” Tribology International, 77, pp 50–64.
   Web of Science ®Google Scholar
• Tala-Ighil, N., Maspeyrot, P., Fillon, M., and Bounif, A. (2007), “Effects of Surface Texture on Journal-Bearing Characteristics under Steady-State Operating Conditions,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 221(6), pp 623–633.
   Web of Science ®Google Scholar
• Tala-Ighil, N., Fillon, M., and Maspeyrot, P. (2011), “Effect of Textured Area on the Performances of a Hydrodynamic Journal Bearing,” Tribology International, 44(3), pp 211–219.
   Web of Science ®Google Scholar
• Shen, C. and Khonsari, M. (2015), “Numerical Optimization of Texture Shape for Parallel Surfaces under Unidirectional and Bidirectional Sliding,” Tribology International, 82, pp 1–11.
   Web of Science ®Google Scholar
• de Kraker, A., van Ostayen, R. A., Van Beek, A., and Rixen, D. J. (2007), “A Multiscale Method Modeling Surface Texture Effects,” Journal of Tribology, 129(2), pp 221–230.
   Web of Science ®Google Scholar
• Kango, S., Sharma, R. K., and Pandey, R. K. (2014), “Thermal Analysis of Microtextured Journal Bearing Using Non-Newtonian Rheology of Lubricant and JFO Boundary Conditions,” Tribology International, 69, pp 19–29.
   Web of Science ®Google Scholar
• Sharma, S. C., and Yadav, S. K. (2013), “Performance of Hydrostatic Circular Thrust Pad Bearing Operating with Rabinowitsch Fluid Model,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 227(11), pp 1272–1284.
   Web of Science ®Google Scholar
• Dowson, D. (1962), “A Generalized Reynolds Equation for Fluid-Film Lubrication,” International Journal of Mechanical Sciences, 4(2), pp 159–170.
   Google Scholar
• Sinhasan, R. and Sah, P. L. (1996), “Static and Dynamic Performance Characteristics of an Orifice Compensated Hydrostatic Journal Bearing with Non-Newtonian Lubricants,” Tribology International, 29(6), pp 515–526.
   Web of Science ®Google Scholar
• Jain, D. and Sharma, S. C. (2015), “Two-Lobe Geometrically Imperfect Hybrid Journal Bearing Operating with Power Law Lubricant,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 229(1), pp 30–46.
   Web of Science ®Google Scholar
• Kango, S. and Sharma, R. K. (2010), “Studies on the Influence of Surface Texture on the Performance of Hydrodynamic Journal Bearing Using Power Law Model,” International Journal of Surface Science and Engineering, 4(4), pp 505–524.
   Web of Science ®Google Scholar
• Sharma, N., Kango, S., and Sharma, R. K. (2014), “Investigations on the Effects of Surface Texture on the Performance of a Porous Journal Bearing Operating with Couple Stress Fluids,” International Journal of Surface Science and Engineering, 8(4), pp 392–407.
   Web of Science ®Google Scholar
• Sharma, S. C., Jain, S. C., and Bharuka, D. K. (2002), “Influence of Recess Shape on the Performance of a Capillary Compensated Circular Thrust Pad Hydrostatic Bearing,” Tribology International, 35(6), pp 347–356.
   Web of Science ®Google Scholar
• El-Sherbiny, M., Salem, F., and El-Hefnawy, N. (1984), “Optimum Design of Hydrostatic Journal Bearings Part I: Maximum Load Capacity,” Tribology International, 17(3), pp 155–161.
   Web of Science ®Google Scholar
• Singh, C., Nailwal, T. S., and Sinha, P. (1982), “Elastohydrostatic Lubrication of Circular Plate Thrust Bearing with Power Law Lubricants,” Journal of Lubrication Technology, 104(2), pp 243–247.
   Web of Science ®Google Scholar
• Sharma, S. C. and Rajput, A. K. (2013), “Effect of Geometric Imperfections of Journal on the Performance of Micropolar Lubricated 4-Pocket Hybrid Journal Bearing,” Tribology International, 60, pp 156–168.
   Web of Science ®Google Scholar
• Sinhasan, R., Jain, S., and Sharma, S. (1983), “Elastohydrostatic Lubrication of Capillary Compensated Circular Pad Thrust Bearings,” Wear, 91(2), pp 131–147.
   Web of Science ®Google Scholar
• Sinhasan, R., Jain, S. C., and Sharma, S. C. (1983), “Elastohydrostatic Lubrication of Capillary Compensated Circular Pad Thrust Bearings,” Wear, 91(2), pp 131–147.
   Web of Science ®Google Scholar
• Sinhasan, R., Jain, S. C., and Sharma, S. C. (1986), “Elastic Considerations in the Hydrostatic Lubrication of Capillary-Compensated Thrust Bearings of Different Configurations,” Wear, 111(1), pp 41–62.
   Web of Science ®Google Scholar
• Jain, D. and Sharma, S. C. (2015), “Combined Influence of Geometric Irregularities of Journal and Turbulence on the Performance of Four-Lobe Hybrid Journal Bearing,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 229, pp 1409–1424.
   Google Scholar
• Kumar, A. and Booker, J. (1991), “A Finite Element Cavitation Algorithm: Application/Validation,” Journal of Tribology, 113(2), pp 255–260.
   Web of Science ®Google Scholar
• Brito, F., Bouyer, J., Fillon, M., and Miranda, A. (2007), “Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two Axial Groove Hydrodynamic Journal Bearing,” Journal of Tribology, 129, pp 98–105.
   Web of Science ®Google Scholar
• Brito, F. (2009), Thermohydrodynamic Performance of Twin Groove Journal Bearings Considering Realistic Lubricant Supply Conditions: A Theoretical and Experimental Study, Universidade do Minho: Braga, Portugal.
   Google Scholar
• Qiu, Y. and Khonsari, M. (2011), “Performance Analysis of Full-Film Textured Surfaces with Consideration of Roughness Effects,” Journal of Tribology, 133(2), 021704–10.
   PubMed Web of Science ®Google Scholar