Influence of Relative Position of Gears and Casing Wall Shape of Gear Box on Churning Loss under Splash Lubrication Condition—Some New Ideas

References

• Krantz, T. L., and Kahraman, A. (2004), “An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear,” Tribology Transactions, 47(1), pp 138–148.
   Web of Science ®Google Scholar
• Yoshizaki, M., Naruse, C., Nemoto, R., and Haizuka, S. (1991), “Study on Frictional Loss of Spur Gears (Concerning the Influence of Tooth Form, Load, Tooth Surface Roughness, and Lubricating Oil),” Tribology Transactions, 34(1), pp 138–146.
   Web of Science ®Google Scholar
• Seetharaman, S., Kahraman, A., Moorhead, M. D., and Petry-Johnson, T. T. (2009), “Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation,” Journal of Tribology, 131(2), p 022202.
   Web of Science ®Google Scholar
• Changenet, C., LePrince, G., Ville, F., and Velex, P. (2011), “A Note on Flow Regimes and Churning Loss Modeling,” Journal of Mechanical Design, 133(12), p 121009.
   Web of Science ®Google Scholar
• Daily, J. W., and Nece, R. E. (1960), “Chamber Dimension Effects on Induced Flow and Frictional Resistance of Enclosed Rotating Disks,” Journal of Basic Engineering, 82, pp 217–232.
   Google Scholar
• Ariura, Y., Ueno, T., Sunaga, T., and Sunamoto, S. (1973), “The Lubricant Churning Loss in Spur Gear Systems,” Bulletin of the JSME, 16(95), pp 881–890.
   Google Scholar
• Terekhov, A. S. (1975), “Hydraulic Losses in Gearboxes with Oil Immersion,” Vestnik Mashinostroeniya, 55(5), pp 13–17.
   Google Scholar
• Lauster, E., and Boos, M. (1983), “Zum Wärmehaushalt Mechanischer Schalt-Getriebe für Nutzfahrzeuge,” VDI-Berichte, 488, pp 45–55.
   Google Scholar
• Boness, R. J. (1989), “Churning Losses of Discs and Gears Running Partially Submerged in Oil,” Proceedings of the ASME International Power Transmission and Gearing Conference, Chicago, 1989, 1: 255–359.
   Google Scholar
• Luke, P., and Olver, A. V. (1999), “A Study of Churning Losses in Dip-Lubricated Spur Gears,” Proceedings of the Institution of Mechanical Engineers - Part G: Journal of Aerospace Engineering, 213, pp 337–346.
   Web of Science ®Google Scholar
• Changenet, C., and Velex, P. (2007), “A Model for the Prediction of Churning Losses in Geared Transmissions—Preliminary Results,” Journal of Mechanical Design, 129(1), pp 128–133.
   Web of Science ®Google Scholar
• Changenet, C., and Velex, P. (2008), “Housing Influence on Churning Losses in Geared Transmissions,” Journal of Mechanical Design, 130(6), p 062603.
   Web of Science ®Google Scholar
• Seetharaman, S., and Kahraman, A. (2009), “Load-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation,” Journal of Tribology, 131(2), p 022201.
   Web of Science ®Google Scholar
• Seetharaman, S., and Kahraman, A. (2010), “A Windage Power Loss Model for Spur Gear Pairs,” Tribology Transactions, 53(4), pp 473–484.
   Web of Science ®Google Scholar
• Höhn, B. R., Michaelis, K., and Otto, H. P. (2008), “Influence of Immersion Depth of Dip Lubricated Gears on Power Loss, Bulk Temperature and Scuffing Load Carrying Capacity,” International Journal of Mechanics and Materials in Design, 4(2), pp 145–156.
   Google Scholar
• LePrince, G., Changenet, C., Ville, F., Velex, P., Dufau, C., and Jarnias, F. (2011), “Influence of Aerated Lubricants on Gear Churning Losses—An Engineering Model,” Tribology Transactions, 54(6), pp 929–938.
   Web of Science ®Google Scholar
• Wikström, G., and Höglund, E., (1996), “Starting and Steady-State Friction Torque of Grease-Lubricated Rolling Element Bearings at Low Temperatures—Part I: A Parameter Study,” Tribology Transactions, 39(3), pp 517–526.
   Web of Science ®Google Scholar
• Leprince, G., Changenet, C., Ville, F., and Velex, P. (2012), “Investigations on Oil Flow Rates Projected on the Casing Walls by Splashed Lubricated Gears,” Advances in Tribology 2012, Article ID 365414.
   Google Scholar
• Chernoray, V., and Jahanmiri, M. (2011), “Experimental Study of Multiphase Flow in a Model Gearbox,” Computational Methods in Multiphase Flow VI, 70, pp 153–164.
   Google Scholar
• Höhn, B. R., Michaelis, K., and Völlmer, T. (1996), “Thermal Rating of Gear Drives: Balance Between Power Loss and Heat Dissipation,” American Gear Manufacturers Association Document 96 FTM8.
   Google Scholar