Effects of Contact Pressure and Sliding Speed on the Unlubricated Friction and Wear Properties of Zn-15Al-3Cu-1Si Alloy

References

• Gebhardt, E. (1940), “The Zn-Corner of the Zn-Al-Cu Ternary System,” Zeitschrift für Metallkunde, 32, pp 78–85.
   Google Scholar
• Löhberg, K. (1940), “X-ray Determination of the Solubility of Al and Cu in Zn,” Zeitschrift für Metallkunde, 32, pp 86–90.
   Google Scholar
• Köster, W. and Moeller, K. (1941), “The Constitution and the Volume Changes of Zn-Cu-Al Alloys. II. The Relation of CuAl with the Ternary Phase,” Zeitschrift für Metallkunde, 33, pp 284–288.
   Google Scholar
• Porter, F. C. (1991), Zinc Handbook: Properties, Processing, and Use in Design (Mechanical Engineering), 1st ed., Marcel Dekker Inc.: New York.
   Google Scholar
• Wakefield, E. C. (1973), “Copper–Aluminium–Zinc Alloy Excels in Tough Conditions,” Design Engineering-London, pp 40–41.
   Google Scholar
• Goodwin, F. E. and Ponikvar, A. L. (1989), Engineering Properties of Zinc Alloys, 3rd ed., International Lead Zinc Research Organization: Triangle Park, NC.
   Google Scholar
• Gervais, E., Levert, H., and Bess, M. (1980), “Development of a Family of Zinc-Base Foundry Alloys,” Transactions of the American Foundrymen's Society, 8, pp 183–194.
   Google Scholar
• Skenazi, A. F., Pelerin, J., Coutsouradis, D., Magnus, B., and Meeus, M. (1983), “Some Recent Developments in the Improvement of the Mechanical Properties of Zinc Foundry Alloys,” Metall, 37, pp 898–902.
   Google Scholar
• Calayag, T. S. (1984), “ZA Casting Alloys Hold Promise for Metal Casting Industry,” Modern Casting, 74, pp 19–22.
   Google Scholar
• Gervais, E., Barnhurst, R. J., and Loong, C. A. (1985), “Analysis of Selected Properties of ZA Alloys,” Journal of the Minerals Metals & Materials Society, 37, pp 43–47.
   Web of Science ®Google Scholar
• Murphy, S. and Savaşkan, T. (1984), “Comparative Wear Behaviour of Zn-Al-Based Alloys in an Automotive Engine Application,” Wear, 98, pp 151–161.
   Web of Science ®Google Scholar
• Savaşkan, T. and Murphy, S. (1987), “Mechanical Properties and Lubricated Wear of Zn-25Al-Based Alloys,” Wear, 116, pp 211–224.
   Web of Science ®Google Scholar
• Lee, P. P., Savaşkan, T., and Laufer, E. (1987), “Wear Resistance and Microstructure of Zn-Al-Si and Zn-Al-Cu Alloys,” Wear, 117, pp 79–89.
   Web of Science ®Google Scholar
• Prasad, B. K. (1997), “Microstructure, Mechanical Properties and Sliding Wear Characteristics of Zn-Based Alloys: Effects of Partially Substituting Cu by Si,” Zeitschrift für Metallkunde, 88, pp 929–933.
   Google Scholar
• Prasad, B. K., Venkateswarlu, K., Modi, O. P., Jha, A. K., Das, S., Dasgupta, R., and Yagneswaran, A. H. (1998), “The Effects of Primary Silicon Particles on the Sliding Wear Behaviour of Aluminium–Silicon Alloys,” Journal of Materials Science Letters, 17, pp 1381–1383.
   Google Scholar
• Savaşkan, T. and Aydıner, A. (2004), “Effects of Silicon Content on the Mechanical and Tribological Properties of Monotectoid-Based Zinc–Aluminium–Silicon Alloys,” Wear, 257, pp 377–388.
   Web of Science ®Google Scholar
• Savaskan, T. and Bican, O. (2005), “Effects of Silicon Content on the Microstructural Features and Mechanical and Sliding Wear Properties of Zn-40Al-2Cu-(0-5)Si Alloys,” Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 404, pp 259–269.
   Web of Science ®Google Scholar
• Marczak, R. J. and Ciach, R. (1973), “Tribological Properties of the Concentrated Al-Zn Alloys,” Proceedings of the 1st Europe Tribology Congress, 25–27 September, London, UK.
   Google Scholar
• Barnhurst, R. J. and Farge, J. C. (1988), “Study of the Bearing Characteristics of Zinc–Aluminum (ZA) Alloys,” Canadian Metallurgical Quarterly, 27, pp 225–233.
   Web of Science ®Google Scholar
• Barnhurst, R. J. (1990), “Designing Zinc Alloy Bearings,” Journal of Materials Engineering, 12, pp 279–285.
   Web of Science ®Google Scholar
• Prasad, B. K., Patwardhan, A. K., and Yagneswaran, A. H. (2001), “Wear Characteristics of a Zinc-Based Alloy Compared with a Conventional Bearing Bronze under Mixed Lubrication Conditions: Effects of Material and Test Parameters,” Canadian Metallurgical Quarterly, 40, pp 193–210.
   Web of Science ®Google Scholar
• Hekimoğlu, A. P. and Savaşkan, T. (2014), “Structure and Mechanical Properties of Zn-(5-25)Al Alloys,” International Journal of Materials Research, 105, pp 1084–1089.
   Web of Science ®Google Scholar
• Savaşkan, T. and Hekimoğlu, A. P. (2014), “Microstructure and Mechanical Properties of Zn-15Al-Based Ternary and Quaternary Alloys,” Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 603, pp 52–57.
   Web of Science ®Google Scholar
• Savaşkan, T. and Hekimoğlu, A. P. (2015), “Effect of Quench-Ageing Treatment on the Microstructure and Properties of Zn-15Al-3Cu Alloy,” International Journal of Materials Research, 106, pp 481–487.
   Web of Science ®Google Scholar
• ASM International Handbook Committee. (1992), Friction, Lubricating, and Wear Technology, Vol. 18 of ASM Handbook, 10th ed., ASM International: Materials Park, OH.
   Google Scholar
• Khun, N. W., Frankel, G. S., and Sumption, M. (2014), “Effect of Normal Load, Sliding Speed, and Surface Roughness on Tribological Properties of Niobium under Dry and Wet Conditions,” Tribology Transactions, 57, pp 944–954.
   Web of Science ®Google Scholar
• Xu, Z., Xue, B., Shi, X., Zhang, Q., Zhai, W., Yao, J., and Wang, Y. (2015), “Sliding Speed and Load Dependence of Tribological Properties of Ti3SiC2/TiAl Composite,” Tribology Transactions, 58, pp 87–96.
   Web of Science ®Google Scholar
• Savaşkan, T. and Bican, O. (2010), “Dry Sliding Friction and Wear Properties of Al25Zn-3Cu-3Si Alloy,” Tribology International, 43, pp 1346–1352.
   Web of Science ®Google Scholar
• Savaşkan, T. and Bican, O. (2010), “Dry Sliding Wear Properties of Al-25Zn-3Cu-(0-5)Si Alloys in the As-Cast and Heat-Treated Conditions,” Tribology Letters, 40, pp 327–336.
   Web of Science ®Google Scholar
• Prasad, B. K. (2005), “Siding Wear Response of a Zinc-Based Alloy and Its Composite and Comparison with a Gray Cast Iron: Influence of External Lubrication and Microstructural Features,” Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 392, pp 427–439.
   Web of Science ®Google Scholar
• Gulbransen, E. A. (1947), “The Kinetics of Oxide Film Formation on Metals and Alloys,” Transactions of the Electrochemical Society, 91, pp 573–604.
   Web of Science ®Google Scholar
• Prasad, B. K., Patwardhan, A. K., and Yagneswaran, A. H. (1997), “Dry Sliding Wear Response of a Modified Zinc-Based Alloy,” Materials Transactions JIM, 38, pp 197–204.
   Web of Science ®Google Scholar
• Hutchings, I. M. (1992), Tribology: Friction and Wear of Engineering Materials, Edward Arnold: London, UK.
   Google Scholar
• Bhushan, B. (2013), Principles and Applications to Tribology, 2nd ed., Wiley & Sons Ltd.: New York.
   Google Scholar
• Sharma, S. C., Satish, B. M., Girish, B. M., Kamath, R., and Asanuma, H. (1998), “Dry Sliding Wear of Short Glass Fibre Reinforced Zinc–Aluminium Composites,” Tribology International, 31, pp 183–188.
   Web of Science ®Google Scholar
• Gahr, K. H. Z. (1987), Microstructure and Wear of Materials, Elsevier Science Publishing Company Inc.: Amsterdam.
   Google Scholar
• Persson, B. N. J. (2000), Sliding Friction: Physical Principles and Applications, 2nd ed., Springer: Berlin.
   Google Scholar
• Bhushan, B. (1981), “Effect of Shear Strain Rate and Interface Temperature on Predictive Friction Models,” Proceedings of the 7th Leeds–Lyon Symposium on Tribology, 9–12 September, Guildford, UK.
   Google Scholar
• Prasad, B. K. (2007), “Investigation into Sliding Wear Performance of Zinc-Based Alloy Reinforced with SiC Particles in Dry and Lubricated Conditions,” Wear, 262, pp 262–273.
   Web of Science ®Google Scholar
• Savaşkan, T. and Maleki, R. A. (2014), “Friction and Wear Properties of Zn-25Al-Based Bearing Alloys,” Tribology Transactions, 57, pp 435–444.
   Web of Science ®Google Scholar
• Prasad, B. K. (2003), “The Effect of Heat Treatment on Sliding Wear Behaviour of a Zinc-Based Alloy Containing Nickel and Silicon,” Tribology Letters, 15, pp 333–341.
   Web of Science ®Google Scholar