References
- Zhang, G. H. (2010), Research of Dynamic Characteristics for High Speed Hybrid Gas Bearing Rotation System, Doctoral Thesis, Harbin Institute of Technology: Harbin, China.
- Liu, Z. S., Zhang, G. H., and Xu, H. J. (2009), “Performance Analysis of Rotating Externally Pressurized Air Bearings,” Journal of Engineering Tribology, 223, pp 653–663.
- Su, J. C. T. and Lie, K. N. (2003), “Rotation Effects on Hybrid Air Journal Bearings,” Tribology International, 36, pp 717–726.
- Rowe, W. B. and Koshal, D. A. (1980), “New Basis for the Optimization of Journal Bearings,” Wear, 64, pp 115–131.
- Arakere, N. and Nelson, H. D. (1988), “An Interior Collocation Method for Static and Dynamic Analysis of Finite Length Gas Journal Bearings,” Journal of Tribology, 110, pp 566–572.
- Liang, P., Lu, C. H., Ding, J., and Chen, S. J. (2013), “A Method for Measuring the Hydrodynamic Effect on the Bearing Land,” Tribology International, 67, pp 146–153.
- Rowe, W. B., Xu, S. X., Chong, F. S., and Weston, W. (1982), “Hybrid Journal Bearings with Particular Reference to Hole-Entry Configurations,” Tribology International, 15, pp 339–348.
- Jain, S. C., Sharma, S. C., and Nagaraju, T. (1997), “Misaligned Journal Effects in Liquid Hydrostatic Non-Recessed Journal Bearings,” Wear, 210, pp 67–75.
- Yang, L. H., Li, H. G., and Yu, L. (2007), “Dynamic Stiffness and Damping Coefficients of Aerodynamic Tilting-Pad Journal Bearings,” Tribology International, 40, pp 1399–1410.
- Nishio, U., Somaya, K., and Yoshimoto, S. (2011), “Numerical Calculation and Experimental Verification of Static and Dynamic Characteristics of Aerostatic Thrust Bearings with Small Feedholes,” Tribology International, 44, pp 1790–1795.
- Yang, X. G., Wang, Y. Q., Jiang, G. Y., Yan, X. C., and Luo, Y. X. (2015), “Dynamic Characteristics of Hydrostatic Active Journal Bearing of Four Oil Recesses,” Tribology Transactions, 58(1), pp 7–17.
- Dellacorte, C. (2011), “Stiffness and Damping Coefficient Estimation of Compliant Surface Gas Bearings for Oil-Free Turbomachinery,” Tribology Transactions, 54(4), pp 674–684.
- San Andres, L. (2006), “Hybrid Flexure Pivot-Tilting Pad Gas Bearings: Analysis and Experimental Validation,” Journal of Tribology, 128(3), pp 551–558.
- Kim, T. H. and San Andres, L. (2008), “Heavily loaded Gas Foil Bearings: A Model Anchored to Test Data,” Journal of Engineering for Gas Turbines and Power, 130(1), pp 1–8.
- Dennis, V., De, P., and Douglas, J. H. (2012), “An Isoviscous, Isothermal Model Investigating the Influence of Hydrostatic Recesses on a Spring-Supported Tilting Pad Thrust Bearing,” Tribology International, 51, pp 25–35.
- Bassani, R. (2013), “Hydrostatic Self-Regulating Multipad Journal and Integral Bearings,” Tribology Transactions, 56(2), pp 187–195.
- Li, Y. T. and Ding, H. (2012), “A Simplified Calculation Method on the Performance Analysis of Aerostatic Thrust Bearing with Multiple Pocketed Orifice-Type Restrictors,” Tribology International, 56, pp 66–71.
- Raniachandra, S. (1961), “A Solution of Reynolds Equation for a Full Finite Journal Bearing,” Journal of Basic Engineering, 83, pp 589–593.
- Pandian, M. C. (1985), “A New Method for the Numerical Solution of the Reynolds Equation for Gas-Lubricated Slider Bearings,” Journal of Engineering Mathematics, 19, pp 3–19.
- Anaya-Dufresne, M. and Sinclair, G. B. (1995), “Some Exact Solutions of Reynolds Equation,” Journal of Tribology, 117, pp 560–562.
- Lund, J. W. (1968), “Calculation of Stiffness and Damping Properties of Gas Bearings,” Journal of Lubrication Technology, 90(4), pp 793–803.
- Lund, J. W. (1976), “Linear Transient Response of a Flexible Rotor Supported in Gas-Lubricated Bearings,” Journal of Lubrication Technology, 98(1), pp 57–65.
- Lo, C. Y., Wang, C. C., and Lee, Y. H. (2005), “Performance Analysis of High-Speed Spindle Aerostatic Bearings,” Tribology International, 38(1), pp 5–14.
- Wang, N. Z., Chang, C. Y., and Tao, Y. (1999), “An Application of Newton's Method to the Lubrication Analysis of Air-Lubricated Bearings,” Tribology Transactions, 42(2), pp 419–424.
- Matthew, C., Evgeny, K., and Sergei, G. (2013), “A Comparative Linear and Nonlinear Dynamic Analysis of Compliant Cylindrical Journal Bearings,” Mechanism and Machine Theory, 64, pp 80–92.
- Kim, H., Jang, G. H., and Ha, H. J. (2012), “A Generalized Reynolds Equation and Its Perturbation Equations for Fluid Dynamic Bearings with Curved Surfaces,” Tribology International, 50, pp 6–15.
- Akbarzadeh, P. (2015), “Numerical Study of Thermohydrodynamic Characteristics of Oil Tilting-Pad Journal Bearings with a Self-Pumping Fluid Flow Circulation,” Tribology Transactions, 58(1), pp 18–30.
- Zheng, S. F. and Jiang, S. Y. (2009), “Improved Finite Difference Method for Pressure Distribution of Aerostatic Bearing,” Journal of Southeast University, 25(4), pp 501–505.
- Faria, M. T. C. and San Andres, L. (2000), “On the Numerical Modeling of High-Speed Hydrodynamic Gas Bearings,” Journal of Tribology, 122, pp 124–130.
- Gero, L. R. and Ettles, C. (1985), “An Evaluation of Finite Difference and Finite Element Methods for the Solution of the Reynolds Equation,” ASLE Transactions, 29(2), pp 166–172.
- Feng, K., Huang, Z., and Guo, Z. Y. (2015), “Design of Spherical Spiral Groove Bearings for a High-Speed Air-Lubricated Gyroscope,” Tribology Transactions, 58(6), pp 1084–1095.
- Liu, D., Liu, Y. H., and Chen, S. J. (1990), Aerostatic Lubrication, Harbin Institute of Technology Press: Harbin, China (in Chinese).