References
- Fouvry, S. and Paulin, C. (2014), “An Effective Friction Energy Density Approach to Predict Solid Lubricant Friction Endurance: Application to Fretting Wear,” Wear, 319(1–2), pp 211–226.
- Ye, Y., Chen, J., and Zhou, H. (2009), “An Investigation of Friction and Wear Performances of Bonded Molybdenum Disulfide Solid Film Lubricants in Fretting Conditions,” Wear, 266(7–8), pp 859–864.
- Langlade, C., Vannes, B., Taillandier, M., and Pierantoni, M. (2001), “Fretting Behavior of Low-Friction Coatings: Contribution to Industrial Selection,” Tribology International, 34(1), pp 49–56.
- Colas, G., Saulot, A., Regis, E., and Berthier, Y. (2015), “Investigation of Crystalline and Amorphous MoS2 Based Coatings: Towards Developing New Coatings for Space Applications,” Wear, 330–331, pp 448–460.
- Hiraoka, N. and Sasaki, A. (1997), “Effect of Discontinuous Hard Under-Coating on the Life of Solid Film Lubricant under Extreme Contact Pressure,” Tribology International, 30(6), pp 429–434.
- Zhu, M. H., Zhou, Z. R., Kapsa, P., and Vincent, L. (2001), “An Experimental Investigation on Composite Fretting Mode,” Tribology International, 34(11), pp 733–738.
- Shen, M. X., Xie, X. Y., Cai, Z. B., Zheng, J. F., and Zhu, M. H. (2011), “An Experiment Investigation on Dual Rotary Fretting of Medium Carbon Steel,” Wear, 271(9–10), pp 1504–1514.
- Briscoe, B. J. and Chateauminois, A. (2002), “Measurements of Friction-Induced Surface Strains in a Steel/Polymer Contact,” Tribology International, 35(4), pp 245–254.
- Briscoe, B. J., Chateauminois, A., Lindley, T. C., and Parsonage, D. (2000), “Contact Damage of Poly(methylmethacrylate) during Complex Microdisplacements,” Wear, 240(1–2), pp 27–39.
- Chateauminois, A. and Briscoe, B. J. (2003), “Nano-Rheological Properties of Polymeric Third Bodies Generated within Fretting Contacts,” Surface and Coatings Technology, 163–164, pp 435–443.
- Shen, M. X., Cai, Z. B., Peng, J. F., Song, C., Mo, J. L., Shen, H. M., and Zhu, M. H. (2013), “Dual-Rotary Fretting Wear of 7075 Alloy in Media of Oil and Water,” Wear, 301(1–2), pp 540–550.
- Singh, H., Mutyala, K. C., Mohseni, H., Scharf, T. W., Evans, R. D., and Doll, G. L. (2015), “Tribological Performance and Coating Characteristics of Sputter Deposited Ti Doped MoS2 in Rolling and Sliding Contact,” Tribology Transactions, 58(5), pp. 767–777.
- Hiraoka, N. (2001), “Wear Life Mechanism of Journal Bearings with Bonded MoS2 Film Lubricants in Air and Vacuum,” Wear, 249(10–11), pp 1014–1020.
- Xu, J., Zhou, Z. R., Zhang, C. H., Zhu, M. H., and Luo, J. B. (2007), “An Investigation of Fretting Wear Behaviors of Bonded Solid Lubricant Coatings,” Journal of Materials Processing Technology, 182(1–3), pp 146–151.
- Luo, J., Cai, Z. B., Mo, J. L., Peng, J. F., and Zhu, M. H. (2015), “Torsional Fretting Wear Behavior of Bonded MoS2 Solid Lubricant Coatings,” Tribology Transactions, 58(6), pp. 1124–1130.
- Zhou, Z. R. and Vincent, L. (1995), “Mixed Fretting Regime,” Wear, 181(2), pp 531–536.
- Heredia, S. and Fouvry, S. (2010), “Introduction of a New Sliding Regime Criterion to Quantify Partial, Mixed and Gross Slip Fretting Regimes: Correlation with Wear and Cracking Processes,” Wear, 269(7–8), pp 515–524.
- Kubart, T., Polcar, T., Kopecky, L., Novák, R. and Nováková, D. (2005), “Temperature Dependence of Tribological Properties of MoS2 and MoSe2 Coatings,” Surface and Coatings Technology, 193(1–3), pp 230–233.