Effects of Loading and Sliding Speed on the Dry Sliding Wear Behavior of Mg-3Al-0.4Si Magnesium Alloy

References

• Blawert, C., Hort, N., and Kainer, K. U. (2004), “Automotive Application of Magnesium and Its Alloys,” Transactions of the Indian Institute of Metals, 57, pp 397–408.
   Web of Science ®Google Scholar
• Avedesian, M. M. and Baker, H. (1999), Magnesium and Magnesium Alloys—ASM Specialty Handbook, 1st ed., ASM International: Materials Park, OH.
   Google Scholar
• An, J., Li, R. G., Lu, Y., Chen, C. M., Xu, Y., Chen, X., and Wang, L. M. (2008), “Dry Sliding Wear Behavior of Magnesium Alloys,” Wear, 265, pp 97–104.
   Web of Science ®Google Scholar
• Somekawa, H., Meada, S., Hirayama, T., Mitsuoka, T., Inoue, T., and Mukai, T. (2013), “Microstructural Evolution during Dry Wear Test in Magnesium and Mg-Y Alloy,” Materials Science and Engineering A, 561, pp 371–377.
   Web of Science ®Google Scholar
• Liang, C., Li, C., Lv, X. X., and An, J. (2014), “Correlation between Friction-Induced Microstructural Evolution, Strain Hardening in Subsurface and Tribological Properties of AZ31 Magnesium Alloy,” Wear, 312, pp 29–39.
   Web of Science ®Google Scholar
• Blum, W., Zhang, P., Watzinger, B., Grossmann, B. V., and Haldenwanger, H. G. (2001), “Comparative Study of Creep of the Die-Cast Mg-Alloys AZ91, AS21, AS41, AM60 and AZ42,” Materials Science and Engineering A, 319–321, pp 735–740.
   Web of Science ®Google Scholar
• Evangelista, E., Geriboldi, E., Lohne, O., and Spigarelli, S. (2001), “Mater. High-Temperature Behaviour of as Die-Cast and Heat Treated Mg-Al-Si AS21X Magnesium Alloy,” Materials Science and Engineering A, 387–389, pp 41–45.
   Web of Science ®Google Scholar
• Cicek, B., Ahlatci, H., and Sun, Y. (2013), “Wear Behaviours of Pb Added Mg-Al-Si Composites Reinforced with in situ Mg2Si Particles,” Materials and Design, 50, pp 929–935.
   Web of Science ®Google Scholar
• Ajith Kumar, K. K., Pillai, U. T. S., Pai, B. C., and Chakraborty, M. (2013), “Dry Sliding Wear Behaviour of Mg-Si Alloys,” Wear, 303, pp 56–64.
   Web of Science ®Google Scholar
• Moore, M. A. and Douthwaite, R. M. (1976), “Plastic Deformation below Worn Surface,” Metals Transactions, 7, pp 1833–1839.
   Web of Science ®Google Scholar
• Chen, H. and Alpas, A. T. (2000), “Sliding Wear Map for the Magnesium Alloy Mg-9Al-0.9Zn (AZ91),” Wear, 246, pp 106–116.
   Web of Science ®Google Scholar
• Archard, J. F. and Hirst, W. (1956), “The Wear of Metals under Unlubricated Conditions,” Proceedings of the Royal Society of London Series A, 236, pp 397–410.
   Web of Science ®Google Scholar
• Su, T. F., Han, X., Wang, Y. B., Yin, M. L., Liang, C., and An, J. (2015), “An Investigation on Subsurface Microstructural Evolution and Mild to Severe Wear Transition in AZ51 Magnesium Alloy,” Tribology Transactions, 58, pp 549–559.
   Web of Science ®Google Scholar
• Selvan, S. A. and Ramanathan, S. (2010), “A Comparative Study of the Wear Behavior of As-Cast and Hot Extruded ZE41A Magnesium Alloy,” Journal of Alloys and Compounds, 502, pp 495–502.
   Web of Science ®Google Scholar
• Taltavull, C., Torres, B., Lopez, A. J., and Rams, J. (2013), “Dry Sliding Wear Behavior of AM60B Magnesium Alloy,” Wear, 301, pp 615–625.
   Web of Science ®Google Scholar
• Selvan, S. A. and Ramanathan, S. (2010), “Dry Sliding Wear Behavior of Hot Extruded ZE41A Magnesium Alloy,” Materials Science and Engineering A, 527, pp 1815–1820.
   Web of Science ®Google Scholar
• Liang, C., Han, X., Su, T. F., Li., C., and An, J. (2014), “Sliding Wear Map for AZ31 Magnesium Alloy,” Tribology Transactions, 57, pp 1077–1085.
   Web of Science ®Google Scholar
• Liu, Y., Jin, B., Shao, S., Li, D., Zeng, X., and Xu, C. (2014), “Dry Sliding Behavior of Mg-Zn-Gd Alloy before and after Cryogenic Treatment,” Tribology Transactions, 57, pp 275–282.
   Web of Science ®Google Scholar
• Wilson, S. and Alpas, A. T. (1997), “Wear Mechanism Maps for Metal Matrix Composites,” Wear, 212, pp 41–49.
   Web of Science ®Google Scholar
• Poddar, P., Das, A., and Sahoo, K. L. (2014), “Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys,” Metallurgical and Materials Transactions A, 37, pp 2270–2283.
   Web of Science ®Google Scholar
• Zhang, J. and Alpas, A. T. (1997), “Transition between Mild and Severe Wear in Aluminum Alloys,” Acta Materialia, 45, pp 513–518.
   Web of Science ®Google Scholar
• Yang, X., Okabe, Y., Miura, H., and Sakai, T. (2012), “Effect of Pass Strain and Temperature on Recrystallisation in Magnesium Alloy AZ31 after Interrupted Cold Deformation,” Journal of Materials Science, 47, pp 2823–2830.
   Web of Science ®Google Scholar
• Barbagallo, S., Cavaliere, P., and Cerri, E. (2004), “Compressive Plastic Deformation of an AS21X Magnesium Alloy Produced by High Pressure Die Casting at Elevated Temperatures,” Materials Science and Engineering A, 367, pp 9–16.
   Web of Science ®Google Scholar
• Lim, S. C. and Ashby, M. F. (1987), “Wear-Mechanism Maps,” Acta Materialia, 35, pp 1–24.
   Web of Science ®Google Scholar