Microabrasion Wear Behavior of Fast-Borided Steel Tooth Drill Bits

References

• Moore, P. X. (1986), Drilling Practices Manual, 2nd ed., PennWell Publishing Company: Tulsa, OK.
   Google Scholar
• Grimes, R. E., Felderhoff, E. C., and Brown, H. (1992), “Heavy Weight Rock Bits Increase Penetration Rates in Hard Rock,” Oil & Gas Journal, pp 76–79.
   Web of Science ®Google Scholar
• Bobo, R. A. (1968), “Drilling—Three Decades Back, One Ahead,” Journal of Petroleum Technology, 20(7), pp 700–708.
   Google Scholar
• Cummins, K. W. (1973), “A Worldwide Directory of Stream Ecologists,” Michigan State University Institute of Water Research, Technical Report No. 28, Michigan, USA.
   Google Scholar
• Praillet, D. (1998), “Blasthole Drilling, Rotary Drilling and the Four Kingdoms,” World Mining Equipments, pp 20–23.
   Google Scholar
• Ulutan, M., Yildirim, M. M., Celik, O. N., and Buytoz, S. (2010), “Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method,” Tribology Letters, 38(231), pp. 231–236.
   Google Scholar
• Şen, Ş., Özbek, I., Sen, U., and Bindal, C. (2001), “Mechanical Behavior of Borides Formed on Borided Cold Work Tool Steel,” Surface and Coatings Technology, 135, pp 173–177.
   Web of Science ®Google Scholar
• Er, U. and Par, B. (2006), “Wear of Plowshare Components in SAE 950C Steel Surface Hardened by Powder Boriding,” Wear, 261, pp 251–255.
   Web of Science ®Google Scholar
• Petrova, R. S. and Suwattanont, N. J. (2005), “Surface Modification of Ferrous Alloys with Boron,” Electronic Materials, 34, pp 575–582.
   Google Scholar
• Uslu, I., Comert, H., Ipek, M., Ozdemir, O., and Bindal, C. (2007), “Evaluation of Borides Formed on AISI P20 Steel,” Materials & Design, 28, pp 55–61.
   Web of Science ®Google Scholar
• Xie, F., Sun, L., and Pan, J. (2012), “Characteristics and Mechanisms of Accelerating Pack Boriding by Direct Current Field at Low and Moderate Temperatures,” Surface and Coatings Technology, 206(11–12), pp 2839–2844.
   Web of Science ®Google Scholar
• Çelebi, G., Ipek, M., Bindal, C., and Ucisik, A. H. (2005), “Some Mechanical Properties of Borides Formed on AISI 8620 Steel,” Materials Forum, 39, pp 456–460.
   Google Scholar
• Ülker, S., Günes, I., and Taktak, Ş. (2011), “Investigation of Tribological Behavior of Plasma Paste Boronized of AISI 8620, 52100, 440C Steels,” Indian Journal of Engineering and Materials Science, 18, pp 370–376.
   Web of Science ®Google Scholar
• Kartal, G., Eryilmaz, O. L., Krumdick, G., Erdemir, A., and Timur, S. (2011), “Kinetics of Electrochemical Boriding of Low Carbon Steel,” Applied Surface Science, 257(15), pp 6928–6934.
   Web of Science ®Google Scholar
• Korzynska, K., Swirad, S., and Lubas, J. (2012), “A Comparison of the Tribological Behaviors of 46Cr2 Steel Modified with Boron,” Tribology Transactions, 55, pp 325–333.
   Web of Science ®Google Scholar
• He, X., Xiao, H., Ozaydin, M. F., Balzuweit, K., and Liang, H. (2015), “Low-Temperature Boriding of High-Carbon Steel,” Surface and Coatings Technology, 263, pp 21–26.
   Web of Science ®Google Scholar
• Totten, G. E. (2006), “Steel Heat Treatment,” Metallurgy and Technologies, Totten, G. E. (Ed.), CRC Press, New York, NY, p. 193.
   Google Scholar
• Abbaschian, R. and Reed-Hill, R. E. (2008), Physical Metallurgy Principles, Cengage Learning, Stamford, CT.
   Google Scholar
• Günen, A., Karakaş, M. S., Kurt, B., and Çalik, A. (2014), “Corrosion Behavior of Borided AISI 304 Austenitic Stainless Steel,” Anti-Corrosion Methods and Materials, 61(2), pp 112–119.
   Web of Science ®Google Scholar
• Kahvecioglu, O., Sista, V., Eryilmaz, O. L, Erdemir, A., and Timur, S. (2011), “Ultra-Fast Boriding of Nickel Aluminide,” Thin Solid Films, 520(5), pp 1575–1581.
   Web of Science ®Google Scholar
• Günen, A., Gök, M. S., Erdoğan, A., Kurt, B., and Orhan, N. (2013), “Investigation of Micro-Abrasion Wear Behavior of Boronized Stainless Steel with Nanoboron Powder,” Tribology Transactions, 56(3), pp 400–409.
   Web of Science ®Google Scholar
• Ozdemir, O., Omar, M. A., Usta, M., Zeytin, S., Bindal, C., and Üçişik, A. H. (2009), “An Investigation on Boriding Kinetics of AISI 316 Stainless Steel,” Vacuum, 83, pp 175–179.
   Web of Science ®Google Scholar
• Matuschka, A. G. (1980), Boronizing, Carl Hansen Verlag: München, Germany.
   Google Scholar
• Düzlükçüoğlu, H., Calik, A., Imrek, H., and Karakas, M. S. (2006), “Examination of Pitting and Wear in Borided, Carburized, and Borocarburized AISI 8620 Gears,” Tribology Transactions, 53, pp 485–490.
   Web of Science ®Google Scholar
• Karamiş, M. B, Nair, F., and Selçuk, B. (1995), “Tribological Properties of Boronized Materials,” Denizli Materials Symposium Proceedings, Ali Rıza Tarakçılar (Ed.), pp 446–454, Denizli, Turkey.
   Google Scholar
• Akshay A., Santosh J., Hosmani, S., and Dumbre, J. (2015), “Tribological Performance of Boronized, Nitrided, and Normalized AISI 4140 Steel against Hydrogenated Diamond-Like Carbon-Coated AISI D2 Steel,” Tribology Transactions, 58, pp 500–510.
   Web of Science ®Google Scholar
• Astakhov, V. P. (2006), Tribology of Metal Cutting, Elsevier, London, UK.
   Google Scholar
• Smith, G. T. (2008), Cutting Tool Technology, Springer, London, UK.
   Google Scholar
• Cimenoğlu, H., Atar, E., and Motallebzadeh, A. (2014), “High Temperature Tribological Behavior of Borided Surfaces Based on the Phase Structure of the Boride Layer,” Wear, 309, pp 152–158.
   Web of Science ®Google Scholar
• Akshay, A. J. and Hosmani, S. S. (2014), “Pack-Boronizing of AISI 4140 Steel: Boronizing Mechanism and the Role of Container Design,” Materials and Manufacturing Processes, 29, pp 1062–1072.
   Web of Science ®Google Scholar
• Günen, A., Kurt, B., Somunkiran, İ., Kanca, E., and Orhan, N. (2015), “The Effect of Process Conditions in Heat-Assisted Boronizing Treatment on the Tensile and Bending Strength Characteristics of the AISI304 Austenitic Stainless Steel,” The Physics of Metals and Metallography, 116(9), pp 896–907.
   Web of Science ®Google Scholar
• Sinha, A. K. (1991), “Boriding (Boronising),” Journal of Heat Treating, 4, pp 437–447.
   Google Scholar
• Garcia-Bustos, E., Figueroa-Guadarrama, M. A., Rodríguez-Castro, G. A., Gómez-Vargas, O. A., Gallardo-Hernández, E. A., and Campos-Silva, I. (2013), “The Wear Resistance of Boride Layers Measured by the Four-Ball Test,” Surface and Coatings Technology, 215, pp 241–246.
   Web of Science ®Google Scholar
• Motallebzadeh, A., Dilektasi, E., Baydogan, M., Atar, E., and Cimenoglu, H. (2015), “Evaluation of the Effect of Boride Layer Structure on the High Temperature Wear Behavior of Borided Steels,” Wear, 328–329, pp 110–114.
   Web of Science ®Google Scholar
• Galibois, A., Boutenko, O., and Voyzelle, B. (1980), “Formation Mechanism of Boride Layers on High Carbon Steels,” Acta Metallurgica, 28, p 1753.
   Google Scholar
• Allaoui, O., Bouaouadja, N., and Saindernan, G. (2006), “Characterization of Boronized Layers on a XC38 Steel,” Surface and Coatings Technology, 201, pp 3475–3482.
   Web of Science ®Google Scholar
• Batista, J. C. A., Matthews, A., and Godoy, C. (2001), “Microabrasive Wear of PVD Duplex and Single‐Layered Coatings,” Surface and Coatings Technology, 142–144, pp 1137–1143.
   Web of Science ®Google Scholar
• Batista, J. C. A., Godoy, C., and Matthews, A. (2002), “Micro-Scale Abrasive Wear Testing of Duplex and Non-Duplex (Single‐Layered) PVD (Ti,Al)N, TiN and CrN Coatings,” Tribology International, 35(6), pp 363–372.
   Web of Science ®Google Scholar
• Batista, J. C. A., Joseph, M. C., Godoy, C., and Matthews, A. (2002), “Micro-Abrasion Wear Testing of PVD TiN Coatings on Untreated and Plasma Nitrided AISI H13 Steel,” Wear, 249(10‐11), pp 971–979.
   Web of Science ®Google Scholar
• Tabur, M., Izciler, M., Gul, F., and Karacan, I. (2009), “Behaviour of Boride Layers Alloyed Steels,” Wear, 266, pp 1106–1112.
   Web of Science ®Google Scholar