Improvement of Lubrication Performance in External Gear Machines through Micro-surface Wedged Gears

References

• Dhar, S. and Vacca, A. (2013), “A Fluid Structure Interaction—EHD Model of the Lubricating Gaps in External Gear Machines: Formulation and Validation,” Tribology International, 62, pp 78–90.
   Web of Science ®Google Scholar
• Nanbu, T., Ren, N., Yasuda, Y., Zhu, D., and Wang, Q. J. (2008), “Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion,” Tribology Letters, 29(3), pp 241–252.
   Web of Science ®Google Scholar
• Wang, X., Kato, K., and Adachi, K. (2002), “The Lubrication Effect of Micro-Pits on Parallel Sliding Faces of SiC in Water,” Tribology Transactions, 45(3), pp 294–301.
   Web of Science ®Google Scholar
• Křupka, I. and Hartl, M. (2007), “The Effect of Surface Texturing on Thin EHD Lubrication Films,” Tribology International, 40(7), pp 1100–1110.
   Web of Science ®Google Scholar
• Wang, Q. J. and Zhu, D. (2005), “Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces,” Journal of Tribology, 127(4), pp 722–728.
   Web of Science ®Google Scholar
• Ivantysynova, M. and Baker, J. (2009), “Power Loss in the Lubricating Gap between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines,” International Journal of Fluid Power, 10(2), pp 29–43.
   Google Scholar
• Wondergem, A. M. and Ivantysynova, M. (2014), “The Impact of the Surface Shape of the Piston on Power Losses,” 8th FPNI Ph.D. Symposium on Fluid Power, pp V001T02A008–V001T02A008, American Society of Mechanical Engineers: Lappeenranta, Finland.
   Google Scholar
• Chacon, R. and Ivantysynova, M. (2014), “An Investigation of the Impact of Micro Surface on the Cylinder Block/Valve Plate Interface Performance,” 8th FPNI Ph.D. Symposium on Fluid Power, pp V001T02A006–V001T02A006, American Society of Mechanical Engineers: Lappeenranta, Finland.
   Google Scholar
• Morgridge, D., Evans, H. P., Snidle, R. W. and Yates, M. K. (2011), “A Study of Seal Lubrication in an Aerospace Fuel Gear Pump Including the Effects of Roughness and Mixed Lubrication,” Tribology Transactions, 54(4), pp 657–665.
   Web of Science ®Google Scholar
• Hooke, C. J. and Koc, E. (1984), “End Plate Balance in Gear Pumps,” Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 198(1), pp 55–60.
   Google Scholar
• Koc, E., Ng, K., and Hooke, C. J. (1997), “An Analysis of the Lubrication Mechanisms of the Bush-Type Bearings in High Pressure Pumps,” Tribology International, 30(8), pp 553–560.
   Web of Science ®Google Scholar
• Koc, E. and Hooke, C. J. (1997), “An Experimental Investigation into the Design and Performance of Hydrostatically Loaded Floating Wear Plates in Gear Pumps,” Wear, 209(1), pp 184–192.
   Web of Science ®Google Scholar
• Borghi, M., Milani, M., Paltrinieri, F., and Zardin, B. (2005), “Studying the Axial Balance of External Gear Pumps,” SAE Technical Paper No. 2005-01-3634.
   Google Scholar
• Dhar, S. and Vacca, A. (2012), “A Novel CFD–Axial Motion Coupled Model for the Axial Balance of Lateral Bushings in External Gear Machines,” Simulation Modelling Practice and Theory, 26, pp 60–76.
   Web of Science ®Google Scholar
• Thiagarajan, D. and Vacca, A. (2014), “A Numerical Procedure to Design the Optimal Axial Balance of Pressure Compensated Gear Machines,” 8th FPNI Ph.D. Symposium on Fluid Power, pp V001T02A005–V001T02A005, American Society of Mechanical Engineers: Lappeenranta, Finland.
   Google Scholar
• Thiagarajan, D., Dhar, S., and Vacca, A. (2014), “A Novel Fluid Structure Interaction–EHD Model and Optimization Procedure for an Asymmetrical Axially Balanced External Gear Machine,” Tribology Transactions, 58, pp 274–287.
   Web of Science ®Google Scholar
• OpenCFD, Ltd. OpenFOAM: The Open Source CFD Toolbox. Available at: www.openfoam.com (accessed September 17, 2015).
   Google Scholar
• GNU Scientific Library. Available at: http://www.gnu.org/software/gsl/ (accessed September 17, 2015).
   Google Scholar
• Vacca, A. and Guidetti, M. (2011), “Modelling and Experimental Validation of External Spur Gear Machines for Fluid Power Applications,” Simulation and Modeling Practice and Theory, 19, pp 2007–2031.
   Web of Science ®Google Scholar
• Vacca, A., Dhar, S., and Opperwall, T. (2011), “A Coupled Lumped Parameter and CFD Approach for Modeling External Gear Machines,” SICFP2011–The Twelfth Scandinavian International Conference on Fluid Power, 18-20 May, Tampere, Finland.
   Google Scholar
• Hamrock, B. J., Schmid, S. R., and Jacobson, B. O. (2004), Fundamentals of Fluid Film Lubrication, Vol. 169, CRC Press: New York, NY.
   Google Scholar
• Jasak, H. and Weller, H. G. (2000), “Application of the Finite Volume Method and Unstructured Meshes to Linear Elasticity,” International Journal for Numerical Methods in Engineering, 48(2), pp 267–287.
   Web of Science ®Google Scholar
• Ivantysyn, J. and Ivantysynova, M. (2003), Hydrostatic Pumps and Motors, Technip Books International: New Delhi.
   Google Scholar