Theoretical and Experimental Study on the Axial Oil Film Stiffness of Tilting Pad Thrust Bearings

References

• Caresta, M. and Kessissoglou, N. (2012), “Active Control of Sound Radiated by a Submarine Hull in Axisymmetric Vibration Using Inertial Actuators,” Journal of Vibration and Acoustics, 134(1), pp 192–197.
   Web of Science ®Google Scholar
• Zhang, G., Zhao, Y., Li, T., and Zhu, X. (2014), “Propeller Excitation of Longitudinal Vibration Characteristics of Marine Propulsion Shafting System,” Shock and Vibration, 17(3), pp 269–278.
   Google Scholar
• Elwell, R. C., Gustafson, R. E., and Reid, J. C. (1964), “Performance of Centrally Pivoted Sector Thrust-Bearing Pads—Sea Trials aboard USS Barry (DD 933),” Journal of Basic Engineering, 86(3), pp 483–496.
   Google Scholar
• Bielec, M. K. and Leopard, A. J. (1970), “Tilting Pad Thrust Bearings: Factors Affecting Performance and Improvements with Directed Lubrication,” The Institution of Mechanical Engineers, Tribology Convention, 184, pp 93–102.
   Google Scholar
• Gregory, R. S. (1974), “Performance of Thrust Bearings at High Operating Speeds,” Journal of Tribology, 96(1), pp 7–14.
   Web of Science ®Google Scholar
• Gregory, R. S. (1979), “Factors Influencing Power Loss of Tilting Pad Thrust Bearings,” Journal of Tribology, 101(2), pp 154–163.
   Web of Science ®Google Scholar
• Capitao, J. W. (1976), “Performance Characteristics of Tilting Pad Thrust Bearings at High Operating Speeds,” Journal of Tribology, 98(1), pp 81–89.
   Web of Science ®Google Scholar
• Kim, K. W., Tanaka, M., and Hori, Y. (1983), “A Three-Dimensional Analysis of Thermohydrodynamic Performance of Sector-Shaped, Tilting-Pad Thrust Bearings,” Journal of Tribology, 105(3), pp 406–412.
   Web of Science ®Google Scholar
• Mikula, A. M. (1986), “Evaluating Tilting-Pad Thrust Bearing Operating Temperatures,” ASLE Transactions, 29(2), pp 173–178.
   Google Scholar
• Khonsari, M. M. (1987), “A Review of Thermal Effects in Hydrodynamic Bearings Part I: Slider and Thrust Bearings,” ASLE Transactions, 30(1), pp 19–25.
   Google Scholar
• Horner, D., Simmons, J. E. L., and Advani, S. D. (1988), “Measurements of Maximum Temperature in Tilting-Pad Thrust Bearings,” Tribology Transactions, 31(1), pp 44–53.
   Web of Science ®Google Scholar
• San Andrés, L. and Marian, C. J. (1998), “Measurements of the Static Load (on Pad) Performance and Pad Temperatures in a Flexure-Pivot Tilting-Pad Bearing,” Tribology Transactions, 41(2), pp 225–232.
   Web of Science ®Google Scholar
• Gardner, W. W. (1998), “Tilting Pad Thrust Bearing Tests—Influence of Oil Flow Rate on Power Loss and Temperatures,” Tribology Series, 34, pp 211–217.
   Google Scholar
• Almqvist, T., Glavatskih, S. B., and Larsson, R. (2000), “THD Analysis of Tilting Pad Thrust Bearings Comparison between Theory and Experiments,” Journal of Tribology, 122(2), pp 412–417.
   Web of Science ®Google Scholar
• Glavatskikh, S. B. (2001), “Steady State Performance Characteristics of a Tilting Pad Thrust Bearing,” Journal of Tribology, 123(3), pp 608–615.
   Web of Science ®Google Scholar
• Yuan, X., Zhu, J., Chen, Z., Wang, H., and Zhang, C. (2003), “A Three-Dimensional TEHD Model and an Optimum Surface Profile Design of Pivoted Pad Thrust Bearings with Large Dimensions,” Tribology Transactions, 46(2), pp 153–160.
   Web of Science ®Google Scholar
• Ettles, C. M., Seyler, J., and Bottenschein, M. (2005), “Calculation of a Safety Margin for Hydrogenerator Thrust Bearings,” Tribology Transactions, 48(4), pp 450–456.
   Web of Science ®Google Scholar
• Harika, E., Bouyer, J., Fillon, M., and Helene, M. (2013), “Measurements of Lubrication Characteristics of a Tilting Pad Thrust Bearing Disturbed by a Water-Contaminated Lubricant,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 227(1), pp 16–25.
   Web of Science ®Google Scholar
• Chang, L. and Yan, Y. (2013), “A Theory of the Hydrodynamic Film Thickness in Centrally Pivoted Oil-Lubricated Plane-Pad Thrust Bearings,” Tribology Transactions, 56(2), pp 149–160.
   Web of Science ®Google Scholar
• Schwanecke, H. (1979), “Investigations on the Hydrodynamic Stiffness and Damping of Thrust Bearings in Ships,” Institute of Marine Engineers Transactions, 91, pp 68–77.
   Google Scholar
• Jiang, P. L. and Yu, L. (1998), “Rotordynamic Modelling of a Hydrodynamic Pivoted-Pad Thrust Bearing,” Tribology International, 31(4), pp 175–181.
   Web of Science ®Google Scholar
• Dimond, T. W., Sheth, P. N., Allaire, P. E., and He, M. (2009), “Identification Methods and Test Results for Tilting Pad and Fixed Geometry Journal Bearing Dynamic Coefficients—A Review,” Shock and Vibration, 16(1), pp 13–43.
   Web of Science ®Google Scholar
• Matta, P. and Arghir, M. (2012), “Identification Method for Rotordynamic Coefficients of Cylindrical Air Bearing Using an Impact Hammer,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 226(3), pp 199–212.
   Web of Science ®Google Scholar