Wear Analysis of Extracted Polyethylene Acetabular Cups Using a 3D Optical Scanner

References

• Kurtz, S., Ong, K., Lau, E., Mowat, F., and Halpern, M. (2007), “Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030,” Journal of Bone and Joint Surgery, 89(4), pp 780–785.
   Web of Science ®Google Scholar
• Gallo, J., Goodman, S. B., Konttinen, Y. T., and Raska, M. (2013), “Particle Disease: Biologic Mechanisms of Periprosthetic Osteolysis in Total Hip Arthroplasty,” Innate Immunity, 19(2), pp 213–224.
   PubMed Web of Science ®Google Scholar
• Patel, A., Pavlou, G., Mujica-Mota, R. E., and Toms, A. D. (2015), “The Epidemiology of Revision Total Knee and Hip Arthroplasty in England and Wales: A Comparative Analysis with Projections for the United States. A Study Using the National Joint Registry Dataset,” Bone & Joint, 97(8), pp 1076–1081.
   PubMed Web of Science ®Google Scholar
• Affatato, S., Zavalloni, M., Taddei, P., Di Foggia, M., Fagnano, C., and Viceconti, M. (2008), “Comparative Study on the Wear Behaviour of Different Conventional and Cross-Linked Polyethylenes for Total Hip Replacement,” Tribology International, 41(8), pp 813–822.
   Web of Science ®Google Scholar
• International Organization for Standardization (ISO) 14242-2. (2000), “Implants for Surgery—Wear of Total Hip-Joint Prostheses,” Geneva, Switzerland.
   Google Scholar
• Bills, P. J., Racasan, R., Underwood, R. J., Cann, P., Skinner, J., Hart, A. J., Jiang, X., and Blunt, L. (2012), “Volumetric Wear Assessment of Retrieved Metal-on-Metal Hip Prostheses and the Impact of Measurement Uncertainty,” Wear, 274–275, pp 212–219.
   Web of Science ®Google Scholar
• Bills, P., Blunt, L., and Jiang, X. (2007), “Development of a Technique for Accurately Determining Clinical Wear in Explanted Total Hip Replacements,” Wear, 263(7–12), pp 1133–1137.
   Web of Science ®Google Scholar
• Martell, J. M., Leopold, S. S., and Liu, X. L. (2000), “The Effect of Joint Loading on Acetabular Wear Measurement in Total Hip Arthroplasty,” Journal of Arthroplasty, 15(4), pp 512–518.
   PubMed Web of Science ®Google Scholar
• Kothari, M., Bartel, D. L., and Booker, J. F. (1996), “Surface Geometry of Retrieved McKee-Farrar Total Hip Replacements,” Clinical Orthopaedics and Related Research, 329, pp S141–S147.
   PubMed Web of Science ®Google Scholar
• International Organization for Standardization (ISO) 10360-2. (2009), “Geometrical Product Specifications (GPS)—Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM),” Geneva, Switzerland.
   Google Scholar
• Becker, A. and Dirix, Y. (2009), “Wear Measurements on Retrieved Metal-on-Metal Bearings: A High Accuracy 3D Measurement Approach,” Proceedings of the 55th Annual Meeting of the Orthopaedic Research Society, Poster No. 2270, Smith & Nephew Orthopaedics AG: Aarau, Switzerland.
   Google Scholar
• Lord, J. K., Langton, D. J., Nargol, A. V. F., and Joyce, T. J. (2011), “Volumetric Wear Assessment of Failed Metal-on-Metal Hip Resurfacing Prostheses,” Wear, 272(1), pp 79–87.
   Web of Science ®Google Scholar
• Rossler, T., Mandat, D., Gallo, J., Hrabovsky, M., Pochmon, M., and Havranek, V. (2009), “Optical 3D Methods for Measurement of Prosthetic Wear of Total Hip Arthroplasty: Principles, Verification and Results,” Optics Express, 17(15), pp 12723–12730.
   PubMed Web of Science ®Google Scholar
• Pochmon, M., Rossler, T., Mandat, D., Gallo, J., and Hrabovsky, M. (2007), “Verification of Abrasion Measurement of Juncture Implants Using Fourier Profilometry, ” 15th Czech-Polish-Slovak conference on Wave and Quantum Aspect of Contemporary Optics, 9780819467485, p. 6609.
   Google Scholar
• Zou, L., Samarawickrama, D. Y. D., Jovanovski, V., and Shelton, J. C. (2001), “Measurements of Sequential Impressions of Acetabula Cups from a Total Hip Joint Replacement Using a Non-Contact Measurement System,” International Journal of Machine Tools and Manufacture, 41(13–14), pp 2023–2030.
   Web of Science ®Google Scholar
• Yun, H. H., Shon, W. Y., Yoon, J. R., Yang, J.-H., and Lim, D.-S. (2012), “Reliability of a PowerPoint Method for Wear Measurement After Total Hip Arthroplasty: A Retrieval Study Using 3-Dimensional Laser Scanning,” The Journal of Arthroplasty, 27(8), pp 1530–1537.
   PubMed Web of Science ®Google Scholar
• Dougherty, P. S. M., Srivastava, G., Onler, R., Ozdoganlar, O. B., and Higgs, C. F., III. (2015), “Lubrication Enhancement for UHMWPE Sliding Contacts through Surface Texturing,” Tribology Transactions, 58(1), pp 79–86.
   Web of Science ®Google Scholar
• Choudhury, D., Ghosh, S., Ali, F., Vrbka, M., Hartl, M., and Krupka, I. (2015), “The Influence of Surface Modification on Friction and Lubrication Mechanism under a Bovine Serum Lubricated Condition,” Tribology Transactions, 59, pp 1–28.
   Web of Science ®Google Scholar
• Milosev, I., Kovac, S., Trebse, R., Levasic, V., and Pisot, V. (2012), “Comparison of Ten-Year Survivorship of Hip Prostheses with Use of Conventional Polyethylene, Metal-on-Metal, or Ceramic-on-Ceramic Bearings,” Journal of Bone and Joint Surgery, 94(19), pp 1756–1763.
   Google Scholar
• Williams, P. A., Yamamoto, K., Masaoka, T., Oonishi, H., and Clarke, I. C. (2007), “Highly Crosslinked Polyethylenes in Hip Replacements: Improved Wear Performance or Paradox?,” Tribology Transactions, 50(2), pp 277–290.
   Web of Science ®Google Scholar
• GOM mbH. Available at: http://www.gom.com/metrology-systems/3d-scanner.html. (accessed October 16, 2015).
   Google Scholar
• VDI/VDE2634-3. (2008), “Optical 3D-Measuring Systems-Multiple view systems based on area scanning,” Fachbereich Fertigungsmesstechnik: Dusseldorf, Germany.
   Google Scholar
• Palousek, D., Omasta, M., Koutny, D., Bednar, J., Koutecky, T., and Dokoupil, F. (2015), “Effect of Matte Coating on 3D Optical Measurement Accuracy,” Optical Materials, 40, pp 1–9.
   Web of Science ®Google Scholar
• Uddin, M. S. (2014), “Wear Measurement and Assessment of Explanted Cross-Linked PE Acetabular Cups Using a CMM,” Tribology Transactions, 57(5), pp 767–777.
   Web of Science ®Google Scholar
• McKellop, H. A., Campbell, P., Park, S. H., Schmalzried, T. P., Grigoris, P., Amstutz, H. C., and Sarmiento, A. (1995), “The Origin of Submicron Polyethylene Wear Debris in Total Hip-Arthroplasty,” Clinical Orthopaedics and Related Research, 311, pp 3–20.
   PubMed Web of Science ®Google Scholar
• Vrbka, M., Nečas, D., Hartl, M., Křupka, I., Urban, F., and Gallo, J. (2015), “Visualization of Lubricating Films between Artificial Head and Cup with Respect to Real Geometry,” Biotribology, 1–2, pp 61–65.
   Google Scholar
• Dumbleton, J. H., Manley, M. T., and Edidin, A. A. (2002), “A Literature Review of the Association between Wear Rate and Osteolysis in Total Hip Arthroplasty,” Journal of Arthroplasty, 17(5), pp 649–661.
   PubMed Web of Science ®Google Scholar
• Ottink, K., Barnaart, L., Westerbeek, R., van Kampen, K., Bulstra, S., and van Jonbergen, H. P. (2015), “Survival, Clinical and Radiological Outcome of the Zweymuller SL/Bicon-Plus Total Hip Arthroplasty: A 15-Year Follow-Up Study,” Hip International, 25(3), pp 204–208.
   PubMed Web of Science ®Google Scholar
• Ilchmann, T., Lüem, M., Pannhorst, S., and Clauss, M. (2012), “Acetabular Polyethylene Wear Volume after Hip Replacement: Reliability of Volume Calculations from Plain Radiographs,” Wear, 282–283, pp 69–75.
   Web of Science ®Google Scholar
• Carmignato, S., Spinelli, M., Affatato, S., and Savio, E. (2011), “Uncertainty Evaluation of Volumetric Wear Assessment from Coordinate Measurements of Ceramic Hip Joint Prostheses,” Wear, 270(9–10), pp 584–590.
   Web of Science ®Google Scholar
• Lu, Z. and McKellop, H. A. (2014), “Accuracy of Methods for Calculating Volumetric Wear from Coordinate Measuring Machine Data of Retrieved Metal-on-Metal Hip Joint Implants,” Proceedings of the Institution of Mechanical Engineers - Part H: Journal of Engineering in Medicine, 228(3), pp 237–249.
   PubMed Web of Science ®Google Scholar
• Dai, X. S., Omori, H., Okumura, Y., Ando, M., Oki, H., Hashimoto, N., and Baba, H. (2000), “Serial Measurement of Polyethylene Wear of Well-Fixed Cementless Metal-Backed Acetabular Component in Total Hip Arthroplasty: An over 10 Year Follow-Up Study,” Artificial Organs, 24(9), pp 746–751.
   PubMed Web of Science ®Google Scholar
• Uddin, M. S. and Zhang, L. C. (2013), “Predicting the Wear of Hard-on-Hard Hip Joint Prostheses,” Wear, 301(1–2), pp 192–200.
   Web of Science ®Google Scholar
• International Organization for Standardization (ISO)/IEC98-3. (2008), “Uncertainty of Measurement,” Geneva, Switzerland.
   Google Scholar
• McKellop, H. A. (2007), “The Lexicon of Polyethylene Wear in Artificial Joints,” Biomaterials, 28(34), pp 5049–5057.
   PubMed Web of Science ®Google Scholar
• Shankar, S. and Nithyaprakash, R. (2014), “Effect of Radial Clearance on Wear and Contact Pressure of Hard-on-Hard Hip Prostheses Using Finite Element Concepts,” Tribology Transactions, 57(5), pp 814–820.
   Web of Science ®Google Scholar