Differences in Mechanisms for Fretting Wear Reduction between Oil and Grease Lubrication

References

• Vingsvo, O., and Söderberg, S. (1988), “On Fretting Maps,” Wear, 126, pp 131–147.
   Web of Science ®Google Scholar
• Mo, J. L., Zhu, M. H., Zheng, J. F., Luo, J., and Zhou, Z. R. (2010), “Study on Rotational Fretting Wear of 7075 Aluminum Alloy,” Tribology International, 43(5–6), pp 912–917.
   Web of Science ®Google Scholar
• Leonard, B., Sadeghi, F., and Cipra, R. (2008), “Gaseous Cavitation and Wear in Lubricated Fretting Contacts,” Tribology Transactions, 51(3), pp 351–360.
   Web of Science ®Google Scholar
• Leonard, B. D., Sadeghi, F., Evans, R. D., Doll, G. L., and Shiller, P. J. (2010), “Fretting of WC/a-C:H and Cr2N Coatings under Grease-Lubricated and Unlubricated Conditions,” Tribology Transactions, 53(1), pp 145–153.
   Web of Science ®Google Scholar
• Leonard, B. D., Sadeghi, F., Shinde, S., and Mittelbach, M. (2012), “A Numerical and Experimental Investigation of Fretting Wear and a New Procedure for Fretting Wear Maps,” Tribology Transactions, 55(3), pp 313–324.
   Web of Science ®Google Scholar
• Odfalk, M., and Vingsvo, O. (1990), “Influence of Normal Force and Frequency in Fretting,” Tribology Transactions, 33(4), pp 604–610.
   Web of Science ®Google Scholar
• Kim, J. S., Cho, D. H., Lee, K. M., and Lee, Y. Z. (2012), “The Signal Parameter for Monitoring Fretting Characteristics in Real-Time,” Tribology Transactions, 55(6), pp 730–737.
   Web of Science ®Google Scholar
• Ichimaru, K. (2006), “Optimization of Reynolds Equation and Application of CIP Method for Analysis of Mixed Elastohydrodynamic Lubrication,” Japanese Journal of Tribology, 51(4), pp 461–474 ( in Japanese).
   Google Scholar
• Ikeuchi, K., Fujita, S., and Ohashi, M. (1998), “Analysis of Fluid Film Formation between Contacting Compliant Solids,” Tribology International, 31(10), pp 613–618.
   Web of Science ®Google Scholar
• Kalin, M., and Vizintin, J. (2006), “The Tribological Performance of DLC Coatings under Oil-Lubricated Fretting Conditions,” Tribology International, 39(10), pp 1060–1067.
   Web of Science ®Google Scholar
• Maruyama, T., and Saitoh, T. (2010), “Oil Film Behavior under Minute Vibrating Conditions in EHL Point Contacts,” Tribology International, 43(8), pp 1279–1286.
   Web of Science ®Google Scholar
• Yano, A., Noda, Y., Akiyama, Y., Watanabe, N., and Fujitsuka, T. (2010), “Evaluation of Fretting Protection Property of Lubricating Grease Applied to Thrust Ball Bearing,” Tribology Online, 5(1), pp 52–59.
   Google Scholar
• Kita, T., and Yamamoto, Y. (1997), “Fretting Wear Performance of Lithium 12-Hydroxystearate Greases for Thrust Ball Bearing in Reciprocating Motion,” Japanese Journal of Tribology, 42(6), pp 492–499 ( in Japanese).
   Google Scholar
• Zhu, M. H., and Zhou, Z. R. (2011), “On the Mechanisms of Various Fretting Wear Modes,” Tribology International, 44(11), pp 1378–1388.
   Web of Science ®Google Scholar
• Wang, J., Hashimoto, T., Nishikawa, H., and Kaneta, M. (2006), “Pure Rolling Elastohydrodynamic Lubrication of Short Stroke Reciprocating Motion,” Tribology International, 38(11–12), pp 1013–1021.
   Web of Science ®Google Scholar
• Cann, P. M. E, Damiens, B., and Lubrecht, A. A. (2004), “The Transition between Fully Flooded and Starved Regimes in EHL,” Tribology International, 37(10), pp 859–864.
   Web of Science ®Google Scholar
• Maruyama, T., and Saitoh, T. (2015), “Relationship between Supplied Oil Flow Rates and Oil Film Thicknesses under Starved Elastohydrodynamic Lubrication,” Lubricants, 3(2), pp 365–380.
   Google Scholar
• Cen, H., Lugt, P. M., and Morales-Espejel, G. E. (2014), “On the Film Thickness of Grease Lubricated Contacts at Low Speeds,” Tribology Transactions, 57(4), pp 668–678.
   Web of Science ®Google Scholar
• Cann, P. M. (1996), “Understanding Grease Lubrication,” Tribology Series, 31, pp 573–581.
   Google Scholar
• Dong, D., Endo, T., and Kimura, Y. (2009), “Formation of thick EHL Film with Grease at Low Speeds,” Proceedings of the World Tribology Congress, September 6–11, Kyoto, Japan.
   Google Scholar
• Kimura, Y., Endo, T., and Dong, D. (2008), “EHL with Grease at Low Speeds,” Proceedings of CIST2008 & ITS-IFToMM2008, Advanced Tribology.
   Google Scholar
• Hamrock, B. J., and Dowson, D. (1977), “Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results,” Journal of Lubrication Technology, 99(2), pp 264–275.
   Web of Science ®Google Scholar
• Jonkisz, W., and Krzeminski-Freda, H. (1979), “Pressure Distribution and Shape of an Elastohydrodynamic Grease Film,” Wear, 55, pp 81–89.
   Web of Science ®Google Scholar
• Kaneta, M., Ogata, T., Takubo, Y., and Naka, M. (2000), “Effects of Thickener Structure on Grease Elastohydrodynamic Lubricant Films,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 214, pp 327–336.
   Web of Science ®Google Scholar