Transient Pressure and Temperature Field Measurements in a Lightly Loaded Circumferential Groove Journal Bearing from Startup to Steady-State Thermal Stabilization

References

• Dowson, D., Hudson, J. D., Hunter, B., and March, C. N. (1966–1967), “An Experimental Investigation of the Thermal Equilibrium of Steadily Loaded Journal Bearings,” Proceedings of the Institution of Mechanical Engineers, 181, pp 70–80.
   Google Scholar
• Mitsui, J., Hori, Y., and Tanaka, M. (1986), “An Experimental Investigation on the Temperature Distribution in Circular Journal Bearings,” Journal of Tribology, 108(4), pp 621–627.
   Web of Science ®Google Scholar
• Tonnensen, J. and Hansen, P. K. (1981), “Some Experiments on the Steady State Characteristics of a Cylindrical Fluid-Film Bearing Considering Thermal Effects,” Journal of Lubrication Technology, 103(1), pp 107–114.
   Web of Science ®Google Scholar
• Swanson, E. E. and Kirk, R. G. (1995), “Experimental Temperature and Pressure Profiles for Two Steadily Loaded Journal Bearings,” Tribology Transactions, 38(3), pp 601–606.
   Web of Science ®Google Scholar
• Pascovici, M. D. (1975), Contribuții la Studiul Transferului de Căldură în Filmul de Lubrifiant și a Efectelor Lui, [Contributions to the Study of Heat Transfer in Lubricant Films and their Application], Ph.D. Thesis, University Politechnica of Bucharest, Bucharest, Romania.
   Google Scholar
• Ferron, J., Frêne, J., and Boncompain, R. (1983), “A Study of the Thermohydrodynamic Performance of a Plain Journal Bearing. Comparison between Theory and Experiments,” Journal of Lubrication Technology, 105(3), pp 422–428.
   Web of Science ®Google Scholar
• Fillon, M., Bligoud, J. C., and Frêne, J. (1992), “Experimental Study of Tilting-Pad Journal Bearings—Comparison with Theoretical Thermoelastohydrodynamic Results,” Journal of Tribology, 114, pp 579–588.
   Web of Science ®Google Scholar
• Kucinschi, B. and Fillon, M. (1999), “An Experimental Study of Transient Thermal Effects in a Plain Journal Bearing,” Journal of Tribology, 121(2), pp 327–332.
   Web of Science ®Google Scholar
• Bouyer, J. and Fillon, M. (2002), “An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances,” Journal of Tribology, 124(2), pp 313–319.
   Web of Science ®Google Scholar
• Bouyer, J. and Fillon, M. (2011), “Experimental Measurement of the Friction Torque on Hydrodynamic Plain Journal Bearings during Start-Up,” Tribology International, 44, pp 772–781.
   Web of Science ®Google Scholar
• Cristea, A. F., Bouyer, J., Fillon, M., and Pascovici, M. D. (2011), “Pressure and Temperature Field Measurements of a Lightly Loaded Circumferential Groove Journal Bearing,” Tribology Transactions, 54(5), pp 806–823.
   Web of Science ®Google Scholar
• Cristea, A. F. (2012), Analysis of Thermal Effects in Circumferential Groove Journal Bearings with Reference to the Divergent Zone, Ph.D. Thesis, Université de Poitiers, Poitiers, France.
   Google Scholar
• Brito, F. P., Miranda, A. S., Bouyer, J., and Fillon, M. (2007), “Experimental Investigation of the Influence of Supply Temperature and Supply Pressure on the Performance of a Two-Axial Groove Hydrodynamic Journal Bearing,” Journal of Tribology, 129(1), pp 98–105.
   Web of Science ®Google Scholar
• Etsion, I. and Ludwig, L. P. (1982), “Observation of Pressure Variation in the Cavitation Region of Submerged Journal Bearings,” Journal of Lubrication Technology, 104(2), pp 157–163.
   Web of Science ®Google Scholar
• Braun, M. J. and Hendricks, R. C. (1984), “An Experimental Investigation of the Vaporous/Cavity Characteristics of an Eccentric Journal Bearing,” ASLE Transactions, 27(1), pp 1–14.
   Google Scholar
• Roberts, J. B. and Hinton, R. E. (1982), “Pressure Distributions in a Superlaminar Journal Bearing,” Journal of Lubrication Technology, 104(2), pp 187–195.
   Web of Science ®Google Scholar
• Someya, T. (2003), “On the Development of Negative Pressure in Oil Film and the Characteristics of Journal Bearings,” Meccanica, 38, pp 643–658.
   Web of Science ®Google Scholar
• Fillon, M., Frêne, J., and Boncompain, R. (1987), “Historical Aspects and Present Development on Thermal Effects in Hydrodynamic Bearings,” In D. Dowson, C.M. Taylor, M. Godet, and D. Berthe (Eds), Proceedings of the 13th Leeds–Lyon Symposium on Tribology, Tribology Series, Vol. 11, England: University of Leeds, pp 27–47.
   Google Scholar
• Khonsari, M. M. (1988), “A Review of Thermal Effects in Hydrodynamic Bearings. Part II: Journal Bearings,” ASLE Transactions, 30(1), pp 26–33.
   Google Scholar
• Pinkus, O. (1990), Thermal Aspects of Fluid Film Lubrication, New York, NY: ASME Press.
   Google Scholar
• Tanaka, M. (2000), “Recent Thermohydrodynamic Analyses and Designs of Thick-Film Bearings,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 214, pp 107–122.
   Web of Science ®Google Scholar
• Dowson, D., Godet, M., and Taylor, C. M. (Eds.). (1974), Proceedings of the 1st Leeds–Lyon Symposium on Tribology: “Cavitation and Related Phenomena on Lubrication.” Leeds, UK: Mechanical Engineering Publications for the Institute of Technology, Leeds.
   Google Scholar
• Dowson, D. and Taylor, C. M. (1979), “Cavitation in Bearings,” Annual Review of Fluid Mechanics, 11, pp 35–66.
   Web of Science ®Google Scholar
• Brewe, D. E., Ball, J. H., and Khonsari, M. M. (Eds.). (1990), “Current Research in Cavitating Fluid Films,” STLE Special Publication 28.
   Google Scholar
• Heshmat, H. (1991), “The Mechanism of Cavitation in Hydrodynamic Lubrication,” Tribology Transactions, 34(2), pp 177–186.
   Web of Science ®Google Scholar
• Braun, M. J. and Hannon, W. M. (2010), “Cavitation Formation and Modeling for Fluid Film Bearings: A Review,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 224, pp 839–863.
   Web of Science ®Google Scholar
• Swanson, E. E. and Kirk, R. G. (1997), “Survey of Experimental Data for Fixed Geometry Hydrodynamic Journal Bearings,” Journal of Tribology, 119(4), pp 704–710.
   Web of Science ®Google Scholar