References
- Harris, T. A. (2001), Rolling Bearing Analysis, John Wiley & Sons: New York.
- Garg, H. C., Sharda, H. B., and Kumar, V. (2006), “On the Design and Development of Hybrid Journal Bearings: A Review,” Tribotest, 12(1), pp 1–19.
- Lee, Y. Z. and Ludema, K. C. (1990), “The Shared-Load Wear Model in Lubricated Sliding: Scuffing Criteria and Wear Coefficients,” Wear, 138, pp 13–22.
- Larsson, P. O., Larsson, R., Jolkin, A., and Marklund, O. (2000), “Pressure Fluctuations as Grease Soaps Pass through an EHL Contact,” Tribology International, 33, pp 211–216.
- Kaneta, M., Ogata, T., Takubo, Y., and Naka, M. (2000), “Effects of a Thickener Structure on Grease Elastohydrodynamic Lubrication Films,” Proceedings of the Institution of Mechanical Engineers – Part J: Journal of Engineering Tribology, 214(4), pp 327–336.
- Booser, E. and Wilcock, D. (1953), “Minimum Oil Requirements of Ball Bearings,” Lubrication Engineering, 9, pp 156.
- Cann, P. and Spikes, H. (1992), “Film Thickness Measurements of Lubricating Greases under Normally Starved Conditions,” NLGI Spokesman, 56, pp 21–26.
- Cann, P., Williamson, B., Coy, R., and Spikes, H. (1992), “Behaviour of Greases in Elastohydrodynamic Contacts,” Journal of Physics D: Applied Physics, 25(1A), A124–A132.
- Cann, P. (1996), “Understanding Grease Lubrication,” Tribology Series, 31, pp 573–581.
- Rao, A. R. and Mohanram, P. V. (1994), “A Study of Wear Characteristics of Journal Bearings Operating under Mixed Lubrication Conditions,” Wear, 172, pp 11–22.
- Bouyer, J., Fillon, M., and Pierre-Danos, I. (2007), “Influence of Wear on the Behavior of a Two-Lobe Hydrodynamic Journal Bearing Subjected to Numerous Startups and Stops,” Journal of Tribology, 129, pp 205–208.
- Archard, J. F. (1953), “Contact and Rubbing of Flat Surfaces,” Journal of Applied Physics, 24, pp 981–988.
- Gwidon, W. and Andrew, W. (2001), Engineering Tribology, Elsevier Science & Technology: United Kingdom.
- Hamrock, B. J., Schmid, S. R., and Jacobson, B. O. (2004), Fundamentals of Fluid Film Lubrication, CRC Press: New York.
- Cousseau, T., Bjorling, M., Graca, B., Campos, A., Seabra, J., and Larsson, R. (2012), “Film Thickness in a Ball-on-Disc Contact Lubricated with Grease, Bleed Oils and Base Oils,” Tribology International, 53, pp 53–60.
- Jonkisz, W. and Krzeminski-Freda, H. (1982), “The Properties of Elastohydrodynamic Grease Films,” Wear, 77, pp 277–285.
- Tallian, T. E. (1972), “The Theory of Partial Elastohydrodynamic Contacts,” Wear, 21, pp 49–101.
- Lee, Y. Z. and Ludema, K. C. (1991), “The Effects of Surface Roughening and Protective Film Formation on Scuff Initiation in Boundary Lubrication,” Journal of Tribology, 113(2), pp 295–302.