Dry Sliding of Nitrided NiTiHf

References

• DellaCorte, C., Pepper, S. V., Noebe, R., Hull, D. R., and Glennon, G. (2009), “Intermetallic Nickel–Titanium Alloys for Oil-Lubricated Bearing Applications,” NASA/TM-2009-215646.
   Google Scholar
• DellaCorte, C., Noebe, R., Stanford, M. K., and Padula, S. A. (2011), “Resilient and Corrosion-Proof Rolling Element Bearings Made from Superelastic Ni-Ti Alloys for Aerospace Mechanism Applications,” NASA/TM-2011-217105.
   Google Scholar
• DellaCorte, C., Stanford, M. K., and Jett, T. R. (2015), “Rolling Contact Fatigue of Superelastic Intermetallic Materials (SIM) for Use as Resilient and Corrosion Resistant Bearings,” Tribology Letters, 57, Citation ID 26.
   Web of Science ®Google Scholar
• Pepper, S. V., DellaCorte, C., Noebe, R. D., Hull, D. R., and Glennon, G. (2009), “NITINOL 60 as a Material for Spacecraft Triboelements,” ESMATS 13 Conference, Vienna, Austria, September, 23–25, 2009.
   Google Scholar
• Zeng, Q. F. and Dong, G. N. (2013), “Influence of Load and Sliding Speed on Super-Low Friction of Nitinol 60 Alloy under Castor Oil Lubrication,” Tribology Letters, 52, pp 47–55.
   Web of Science ®Google Scholar
• Zeng, Q. F. and Dong, G. N. (2014), “Superlubricity Behaviors of Nitinol 60 Alloy under Oil Lubrication,” Transactions of Nonferrous Metals Society of China, 24(2), pp 354–359.
   Web of Science ®Google Scholar
• DellaCorte, C., Thomas, F., and Leak, O. A. (2015), “Tribological Evaluation of Candidate Gear Materials Operating under Light Loads in Highly Humid Conditions,” NASA/TM-2015-218896.
   Google Scholar
• Wu, S. K., Chu, C. L., and Lin, H. C. (1997), “Ion Nitriding of Equiatomic TiNi Shape Memory Alloys II. Corrosion Properties and Wear Characteristics,” Surface & Coatings Technology, 92, pp 206–211.
   Web of Science ®Google Scholar
• Wu, S. K., Lin, H. C., and Lee, C. Y. (1999), “Gas Nitriding of an Equiatomic TiNi Shape Memory Alloy II. Hardness, Wear and Shape Memory Ability,” Surface & Coatings Technology, 113, pp 13–16.
   Web of Science ®Google Scholar
• Stanford, M. K. (2016), “Preliminary Investigation of Surface Treatments to Enhance the Wear Resistance of 60-Nitinol,” NASA/TM-2016-219121.
   Google Scholar
• Stanford, M. K. (2016), “Hardness and Microstructure of Binary and Ternary Nitinol Compounds,” NASA/TM-2016-218946.
   Google Scholar
• Hornbuckle, B. C., Noebe, R. D., and Thompson, G. B. (2015), “Influence of Hf Solute Additions on the Precipitation and Hardenability in Ni-Rich NiTi Alloys,” Journal of Alloys and Compounds, 640, pp 449–454.
   Web of Science ®Google Scholar
• Stanford, M. K. (2018), “Friction and Wear of Unlubricated NiTiHf with Nitriding Surface Treatments,” NASA/TM-2018-219740.
   Google Scholar
• ASTM Test Method G99-05. (2016), “Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus,” American Society for the Testing of Metals” West Conshohocken, PA.
   Google Scholar
• Zang, C. and Farhat, Z. N. (2009), “Sliding Wear of Superelastic TiNi Alloy,” Wear, 267, pp 394–400.
   Web of Science ®Google Scholar
• Mehdi, M., Farokhzadeh, K., and Edrisy, A. (2015), “Dry Sliding Wear Behaviour of Superelastic Ti-10V-2Fe-3Al β-Titanium Alloy,” Wear, 350, pp 10–20.
   Web of Science ®Google Scholar
• Singh, J. and Alpas, A. T. (1995), “Dry Sliding Wear Mechanisms in a Ti50Ni47Fe3 Intermetallic Alloy,” Wear, 181–183(1), pp 302–311.
   Google Scholar
• Abedini, M., Ghasemi, H. M., and Nili Ahmadabadi, M. (2012), “Effect of Normal Load and Sliding Distance on the Wear Behavior of NiTi Alloy,” Tribology Transactions, 55, pp 677–684.
   Web of Science ®Google Scholar
• Johnson, B. J., Kennedy, F. E., and Baker, I. (1996), “Dry Sliding Wear of NiAl,” Wear, 192, pp 241–247.
   Web of Science ®Google Scholar
• Archard, J. F. (1953), “Contact and Rubbing of Flat Surfaces,” Journal of Applied Physics, 24(8), pp 981–988.
   Web of Science ®Google Scholar
• Kato, K. and Adachi, K. (2001), “Wear Mechanisms,” Modern Tribology Handbook: Vol. 1. Principles of Tribology, pp 273–300, Bhushan, B. (Ed.), CRC Press: Boca Raton, FL.
   Google Scholar
• Yang, L. J. (2003), “Wear Coefficient Equation for Aluminum-Based Matrix Composites against Steel Disk,” Wear, 255, pp 579–592.
   Web of Science ®Google Scholar
• Fairies, L. M. (1986), “Inductively Coupled Plasma Atomic Emission Spectroscopy,” ASM Handbook: Vol. 10. Materials Characterization, pp 31–42, Whan, R. E. (Ed.), ASM International: Materials Park, OH.
   Google Scholar
• Leyden, D. E. (1986), “X-ray Spectrometry,” ASM Handbook: Vol. 10. Materials Characterization, pp 82–101, Whan, R. E. (Ed.), ASM International: Materials Park, OH.
   Google Scholar
• Yan, L. and Liu, Y. (2014), “Effect of Temperature on the Wear Behavior of NiTi Shape Memory Alloy,” Journal of Materials Research, 30(2), pp 186–196.
   Web of Science ®Google Scholar
• Arciniegas, M., Casals, J., Manero, J. M., Peña, J., and Gil, F. J. (2008), “Study of Hardness and Wear Behavior of NiTi Shape Memory Alloys,” Journal of Alloys and Compounds, 460, pp 213–219.
   Web of Science ®Google Scholar