Modeling Solid Contact between Smooth and Rough Surfaces with Non-Gaussian Distributions

References

• Greenwood, J. A. and Williamson, J. P. (1966), “Contact of Nominally Flat Surfaces,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, 295, pp 300–319.
   Google Scholar
• Greenwood, J. A. and Tripp, J. H. (1970), “The Contact of Two Nominally Flat Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers, 185, pp 625–633.
   Google Scholar
• Picard, M., Tian, T., and Nishino, T. (2016), “Predicting Gas Leakage in the Rotary Engine—Part I: Apex and Corner Seals,” Journal of Engineering for Gas Turbines and Power, 138, pp 062503.
   Web of Science ®Google Scholar
• Picard, M., Tian, T., and Nishino, T. (2016), “Predicting Gas Leakage in the Rotary Engine—Part II: Side Seals and Summary,” Journal of Engineering for Gas Turbines and Power, 138, pp 062504.
   Web of Science ®Google Scholar
• Gore, M. (2014), Measurement and Prediction of In-Cylinder Friction in Internal Combustion Engines, Doctoral Dissertation, Loughborough, UK: Loughborough University.
   Google Scholar
• Sanda, S., Murakami, M., Noda, T., and Konomi, T. (1997), “Analysis of Lubrication of a Piston Ring Package: Effect of Oil Starvation on Oil Film Thickness,” JSME International Journal Series B Fluids and Thermal Engineering, 40, pp 478–486.
   Web of Science ®Google Scholar
• Priestner, C., Allmaier, H., Priebsch, H. H., and Forstner, C. (2012), “Refined Simulation of Friction Power Loss in Crank Shaft Slider Bearings Considering Wear in the Mixed Lubrication Regime,” Tribology International, 46, pp 200–207.
   Web of Science ®Google Scholar
• Kazama, T. (2005), “Numerical Simulation of a Slipper Model for Water Hydraulic Pumps/Motors in Mixed Lubrication,” Proceedings of the JFPS International Symposium on Fluid Power, 2005, pp 509–514.
   Google Scholar
• Abdelounis, H. B., Le Bot, A., Perret-Liaudet, J., and Zahouani, H. (2010), “An Experimental Study on Roughness Noise of Dry Rough Flat Surfaces,” Wear, 268, pp 335–345.
   Web of Science ®Google Scholar
• Sedlaček, M., Podgornik, B., and Vižintin, J. (2009), “Influence of Surface Preparation on Roughness Parameters, Friction and Wear,” Wear, 266, pp 482–487.
   Web of Science ®Google Scholar
• Wang, W. Z., Chen, H., Hu, Y. Z., and Wang, H. (2006), “Effect of Surface Roughness Parameters on Mixed Lubrication Characteristics,” Tribology international, 39, pp 522–527.
   Web of Science ®Google Scholar
• Kim, T. W., Bhushan, B., and Cho, Y. J. (2006), “The Contact Behavior of Elastic/Plastic Non-Gaussian Rough Surfaces,” Tribology Letters, 22, pp 1–13.
   Web of Science ®Google Scholar
• Ciavarella, M. (2016), “Rough Contacts Near Full Contact with a Very Simple Asperity Model,” Tribology International, 93, pp 464–469.
   Web of Science ®Google Scholar
• Kotwal, C. A. and Bhushan, B. (1996), “Contact Analysis of Non-Gaussian Surfaces for Minimum Static and Kinetic Friction and Wear,” Tribology Transactions, 39, pp 890–898.
   Web of Science ®Google Scholar
• Tayebi, N. and Polycarpou, A. A. (2004), “Modeling the Effect of Skewness and Kurtosis on the Static Friction Coefficient of Rough Surfaces,” Tribology International, 37, pp 491–505.
   Web of Science ®Google Scholar
• Elderton, W. P. and Johnson, N. L. (1969), Systems of Frequency Curves, Cambridge, UK: Cambridge University Press.
   Google Scholar
• Nayak, P. R. (1971), “Random Process Model of Rough Surfaces,” Journal of Lubrication Technology, 93, pp 398–407.
   Web of Science ®Google Scholar
• George, F. (2007), Johnson’s System of Distributions and Microarray Data Analysis, Doctoral Dissertation, University of South Florida, Tampa, FL.
   Google Scholar
• Jeng, Y. (1998), “Characterizations of Surface Height Distributions,” Journal of the Chinese Society of Mechanical Engineers, 19, pp 417–423.
   Google Scholar
• Stirzaker, D. (2003), Elementary Probability, Cambridge, UK: Cambridge University Press.
   Google Scholar
• Greenwood, J. A. (2006), “A Simplified Elliptic Model of Rough Surface Contact,” Wear, 261, pp 191–200.
   Web of Science ®Google Scholar
• Jackson, R. L. and Green, I. (2011), “On the Modeling of Elastic Contact between Rough Surfaces,” Tribology Transactions, 54, pp 300–314.
   Web of Science ®Google Scholar
• Chang, W. R., Etsion, I., and Bogy, D. B. (1987), “An Elastic–Plastic Model for the Contact of Rough Surfaces,” Journal of Tribology, 109, pp 257–263.
   Web of Science ®Google Scholar
• Ciavarella, M., Greenwood, J. A., and Paggi, M. (2008), “Inclusion of ‘Interaction’ in the Greenwood and Williamson Contact Theory,” Wear, 265, pp 729–734.
   Web of Science ®Google Scholar
• Fujita, K., Esaki, Y., and Kawamura, M. (1983), “The Antiwear Property of Zinc Dialkyldithiophosphates in Used Engine Oils,” Wear, 89, pp 323–331.
   Web of Science ®Google Scholar
• Sayles, R. S. and Thomas, T. R. (1976), “Thermal Conductance of a Rough Elastic Contact,” Applied Energy, 2, pp 249–267.
   Google Scholar
• Abdelounis, H. B., Le Bot, A., Perret-Liaudet, J., and Zahouani, H. (2010), “An Experimental Study on Roughness Noise of Dry Rough Flat Surfaces,” Wear, 268, pp 335–345.
   Web of Science ®Google Scholar