References
- Council of the European Parliament. (2002), “Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 Relating to the Assessment and Management of Environmental Noise,” Official Journal of the European Communities, L 189, pp 12–25.
- Great Britain. (1996), Calculation of Railway Noise 1995, Stationery Office: London.
- Hardy, A., Jones, R., and Turner, S. (2006), “The Influence of Real-World Rail Head Roughness on Railway Noise Prediction,” Journal of Sound and Vibration, 293, pp 965–974.
- von Diest, K. and Puschel, A. (2013), “High Speed Grinding-Railway Noise Reduction through Regular Rail Grinding without Traffic Interruptions,” INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Innsbruck, Austria, September 15–18.
- Kuijpers, A. H. W. M. (2008), “Rail Roughness Monitoring in The Netherlands,” Noise and Vibration Mitigation for Rail Transportation Systems. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Schulte-Werning, B. et al. (Eds.), Vol 99. Springer: Berlin, Heidelberg.
- Jiang, S., Meehan, P., and Bellette, P. (2014), “Validation of a Prediction Model for Tangent Rail Roughness and Noise Growth,” Wear, 314, pp 261–272.
- Dwight, R. and Jiang, J. (2006), “Determining Wheel–Rail Wear Conditions Using Wheel–Rail Noise,” 7th International Conference on Contact Mechanics and Wear of Rail/Wheel System, Brisbane, Australia, September 24–26.
- Lyu, Y., Bergseth, E., and Olofsson, U. (2015), “On the Relationships among Wheel–Rail Surface Topography, Interface Noise and Tribological Transitions,” Wear, 338, pp 36–46.
- Bolton, P. and Clayton, P. (1984), “Rolling–Sliding Wear Damage in Rail and Tyre Steels,” Wear, 93, pp 145–165.
- Lewis, R. and Olofsson, U. (2004), “Mapping Rail Wear Regimes and Transitions,” Wear, 257, pp 721–729.
- Lyu, Y., Bergseth, E., and Olofsson, U. (2016), “Open System Tribology and Influence of Weather Condition,” Scientific Reports, 6, pp 1–11.
- Abbasi, S., Olander, L., Larsson, C., Olofsson, U., Jansson, A., and Sellgren, U. (2012), “A Field Test Study of Airborne Wear Particles from a Running Regional Train,” Proceedings of the Institution of Mechanical Engineers - Part F: Journal of Rail and Rapid Transit, 226(1), pp 95–109.
- Lewis, R., Dwyer-Joyce, R. S., Lewis, S. R., Hardwick, C., and Gallardo-Hernández, E. A. (2012), “Tribology of the Wheel–Rail Contact: The Effect of Third Body Materials,” International Journal of Railway Technology, 1, pp 167–194.
- Lyu, Y., and Olofsson, U. (2017), “Open System Tribology in the Wheel–Rail Contact—A Literature Review,” Applied Mechanics Reviews, 69(6), pp 1–10.
- Nilsson, R. (2005), On Wear in Rolling/Sliding Contacts, Doctoral Thesis, KTH Royal Institute of Technology, Department of Machine Design, Stockholm, Sweden.
- Lyu, Y., Zhu, Y., and Olofsson, U. (2015), “Wear between Wheel and Rail: A Pin-on-Disc Study of Environmental Conditions and Iron Oxides,” Wear, 328, pp 277–285.