Tilt Angle of Hydrostatic Spindle Influenced by Microscale Effects

References

• Chen, W., Sun, Y., Liang, Y., Bai, Q., and Zhang, P. (2013), “Hydrostatic Spindle Dynamic Design System and Its Verification,” Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 228(1), pp 149–155.
   Web of Science ®Google Scholar
• Neto, C., Evans, D. R., Bonaccurso, E., Butt, H., and Craig, V. S. J. (2005), “Boundary Slip in Newtonian Liquids: A Review of Experimental Studies,” Reports on Progress in Physics, 68(12), pp 2859–2897.
   Web of Science ®Google Scholar
• Jin, J., Zhang, G. X., and Wang, X. J. (2004), “Experiment and Simulations on Lubrication Performance of EMP Journal Bearing,” Journal of Shanghai University (English Edition), 8(1), pp 85–89.
   Google Scholar
• Kim, P., Lee, J. I., and Seok, J. (2014), Analysis of a Viscoplastic Flow with Field-Dependent Yield Stress and Wall Slip Boundary Conditions for a Magnetorheological (MR) Fluid,” Journal of Non-Newtonian Fluid Mechanics, 204, pp 72–86.
   Web of Science ®Google Scholar
• Devakar, M., Sreenivasu, D., and Shankar, B. (2014), “Analytical Solutions of Couple Stress Fluid Flows with Slip Boundary Conditions,” Alexandria Engineering Journal, 53, pp 723–730.
   Google Scholar
• Bailey, N. Y.,·Cliffe, K. A., Hibberd, S.,·and Power, H. (2016), “Dynamics of a High Speed Coned Thrust Bearing with a Navier Slip Boundary Condition,” Journal of Engineering Mathematics, 97, pp 1–24.
   Web of Science ®Google Scholar
• Park, D. J., Kim, C. H., Jang, G. H., and Lee, Y. B. (2008), “Theoretical Considerations of Static and Dynamic Characteristics of Air Foil Thrust Bearing with Tilt and Slip Flow,” Tribology International, 41, pp 282–295.
   Web of Science ®Google Scholar
• Lee, N. S., Choi, D. H., Lee, Y. B., Kim, T. H., and Kim, C. H. (2002), “The Influence of the Slip Flow on Steady-State Load Capacity, Stiffness and Damping Coefficients of Elastically Supported Gas Foil Bearings,” Tribology Transactions, 45, pp 478–484.
   Web of Science ®Google Scholar
• Deng, X., Branagan, M., Weaver, B., and Wood, H. (2017), “Thermal, Elastic and Inertia Effects in Water-Lubricated Tilting Pad Thrust Bearings in the High-Turbulence Operating Region,” STLE Annual Meeting&Exhibition, May 21–25, Hyatt Regency Hotel.
   Google Scholar
• Liao, C. C., Hu, S. Y., Huang, C. P., and Kang, Y. (2017), “Influences of Lubricant Viscosity Ratio on Static Characteristics of Hydrostatic Thrust Bearing,” MATEC Web of Conferences, 114, pp 01006.
   Google Scholar
• Spikes, H. A. (2003), “The Half-Wetted Bearing, Part 1: Extended Reynolds Equation,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 217, pp 1–14.
   PubMed Web of Science ®Google Scholar
• Ma, G., Wu, C., and Zhou, P. (2007), “Wall Slip and Hydrodynamics of Two-Dimensional Journal Bearing,” Tribology International, 40(7), pp 1056–1066.
   Web of Science ®Google Scholar
• Wu, C. (2008), “Performance of Hydrodynamic Lubrication Journal Bearing with a Slippage Surface,” Industrial Lubrication and Tribology, 60(6), pp 293–298.
   Web of Science ®Google Scholar
• Rao, T. (2010), “Analysis of Single-Grooved Slider and Journal Bearing with Partial Slip Surface,” Journal of Tribology, 132(1), pp 014501.1–014501.7.
   Web of Science ®Google Scholar
• Zhang, Y. (2014), “Review of Hydrodynamic Lubrication with Interfacial Slippage,” Journal of the Balkan Tribological Association, 20(4), pp 522–538.
   Google Scholar
• Lin, Q., Wei, Z., Wang, N., et al. (2015), “Effect of Large-Area Texture/Slip Surface on Journal Bearing Considering Cavitation,” Industrial Lubrication & Tribology, 67(3), pp 216–226.
   Web of Science ®Google Scholar
• Lin, Q., Wei, Z., Zhang, Y., et al. (2010), “Effects of the Slip Surface on the Tribological Performances of High-Speed Hybrid Journal Bearing,” Journal of Tribology, 132(1), pp 014501.
   Google Scholar
• Kakino, Y., Yamamoto, Y., and Ishii, N. (1997) “A New Measuring Method of Rotating Accuracy of Spindle,” Annals of the CIRP, 26(1), pp 241–244.
   Google Scholar
• Ma, P., Zhao, C., Lu, X., et al. (2014), “Rotation Error Measurement Technology and Experimentation Research of High-Precision Hydrostatic Spindle,” International Journal of Advanced Manufacturing Technology, 73, pp 1313–1320.
   Web of Science ®Google Scholar
• Anandan, K. P. and Ozdoganlar, O. B. (2013), “Analysis of Error Motions of Ultra-High-Speed (UHS) Micromachining Spindles,” International Journal of Machine Tools & Manufacture, 70(7), pp 1–14.
   Google Scholar
• Xiong, W., Hou, Z., and Lv, L. (2014), “Study on the Mechanism of Hydrostatic Spindle Rotational Error Motion,” Journal of Mechanical Engineering, 50(7), pp 112–119.
   Google Scholar
• Kashchenevsky, L. and Knapp, B. R. (2001), “Predicting the Rotational Accuracy of Hydrostatic Spindles,” ASPE Summer Topical Meeting.
   Google Scholar
• Idowu, A. (1998), Dynamic Metrology of Error Motions in Precision Spindles Using Optical Metrology, Ph.D. Thesis, Cranfield University.
   Google Scholar
• Lu, X. and Jamalian, A. (2011), “A New Method for Characterizing Axis of Rotation Radial Error Motion: Part 1. Two-Dimensional Radial Error Motion Theory,” Precision Engineering, 35(1), pp 73–94.
   Web of Science ®Google Scholar
• Grejda, R., Marsh, E., and Vallance, R. (2005), “Techniques for Calibrating Spindles with Nanometer Errormotion,” Precision Engineering, 29(1), pp 113–123.
   Web of Science ®Google Scholar
• Navier, C. L. (1823), “Memoir on the Laws of the Movement of Fluids,” Memoirs of the Academie (Royal) Sciences of the Institut (imperial) of France, 6, pp 389–440.
   Google Scholar
• Aurelian, F., Patrick, M., and Mohamed, H. (2011), “Wall Slip Effects in (Elasto) Hydrodynamic Journal Bearings,” Tribology International, 44, pp 868–877.
   Web of Science ®Google Scholar