Prevention of Electrostatic Charge Generation in Filtration of Low-Conductivity Oils by Surface Modification of Modern Filter Media

References

• Kuhnlein, M., Wendel, T., and Murrenhoff, H. (2013), “Electrostatic Charge Measurement in Hydraulic Circuits,” Proceedings from the 13th Scandinavian International Conference on Fluid Power, Linköping, Sweden, June 3–5, pp 273–283. Linköping University Electronic Press. doi:10.3384/ecp1392a27
   Google Scholar
• Duchowski, J. K. (2014), “Electron Spin Resonance (ESR) Spectra of Butylated Hydroxytoluene (BHT) as Evidence of Free Radical Formation in Electrostatic Discharge (ESD) Damaged Lubricating Oils,” Tribologia, 256(4), pp 43–52.
   Google Scholar
• Pavey, I. D. (2004), “Electrostatic Hazards in the Process Industries,” Process Safety and Environmental Protection, 82(2), pp 132–141. doi:10.1205/095758204322972771
   Google Scholar
• Lang, T. (2015), Filtrationsspezifische Untersuchung der Elektrostatischen Aufladung Niedrig Leitfähiger Hydrauliköle bei der Filtration und Optimierung Eines Filtermediums Hinsichtlich der Vermeidung Elektrostatischer Kontaktaufladung [Filtrationnspecific Investigation of Electrostatic Charge of Low Conductive Hydraulic Oils During Filtration and Optimization of a Filter Medium Regarding the Avoidance of Electrostatic Contact Charge]. Dissertation. Fachbereich Maschinenbau und Verfahrenstechnik,Technische Universität Kaiserslautern.
   Google Scholar
• Sasaki, A. (2000), “Generation Problem of Static Electricity during Oil Filtration,” Presented at the International Exposition for Power Transmission and Technical Conference, April 4–6, 100–9.9.
   Google Scholar
• Phair, B., Bensch, L., Duchowski, J., Khazan, M., and Tsalyuk, V. (2005), “Overcoming the Electrostatic Discharge in Hydraulic, Lubricating and Fuel-Filtration Applications by Incorporating Novel Synthetic Filter Media,” Tribology Transactions, 48(3), pp 343–351. doi:10.1080/05698190591002195
   Web of Science ®Google Scholar
• Leonard, J. T. and Carhart, H. W. (1970), “Effect of Conductivity on Charge Generation in Hydrocarbon Fuels Flowing through Fiber Glass Filters,” Journal of Colloid and Interface Science, 32(3), pp 383–394. doi:10.1016/0021-9797(70)90123-2
   Web of Science ®Google Scholar
• Huber, P. W. and Sonin, A. A. (1977), “Theory for Electric Charging in Liquid Hydrocarbon Filtration,” Journal of Colloid and Interface Science, 61(1), pp 109–125. doi:10.1016/0021-9797(77)90420-9
   Web of Science ®Google Scholar
• Lüttgens, G., Blum, C., Künzig, H., Linberg, K., Lüttgens, S. and Schüler, G. (2002), Kontakt und Studium, Vol. 44, pp 1–259, Expert verlag GmbH: Renningen.
   Google Scholar
• Scheffler, T. N. (2000), Kollisionskühlung in Elektrisch Geladener Granularer Materie [Collision Cooling in Electrical Loaded Granular Materia], Dissertation. Fachbereich Physik-Technologie, Gerhard-Mercator-Universität Duisburg.
   Google Scholar
• Lowell, J. and Rose-Innes, A. C. (1980), “Contact Electrification,” Advances in Physics, 29(6), pp 947–1023. doi:10.1080/00018738000101466
   Web of Science ®Google Scholar
• Helmholtz, H. (1879), “Studien über Electrische Grenzschichten [Studies on Electrical Boundary Layers],” Annalen der Physik und Chemie [Annals of Physics and Chemistry], 243(7), pp 337–382. doi:10.1002/andp.18792430702
   Google Scholar
• Choi, H., Kim, H.-B., Ko, S.-J., Kim, J. Y., and Heeger, A. J. (2015), “An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells,” Advanced Materials, 27(5), pp 892–896. doi:10.1002/adma.201404172
   PubMed Web of Science ®Google Scholar
• Wang, Z. L., Lin, L., Chen, J., Niu, S., and Zi, Y. (2016), Triboelectrification, Springer International Publishing: Switzerland.
   Google Scholar
• Lee, L.-H. (1991), Fundamentals of Adhesion, Springer US: Boston.
   Google Scholar
• Quéré, D. (2008), “Wetting and Roughness,” Annual Review of Materials Research, 38(1), pp 71–99. doi:10.1146/annurev.matsci.38.060407.132434
   Google Scholar
• Staudt, J., Leyer, S., and Duchowski, J. K. (2019), “Detailed Characterization of the Effect of Application of Commercially Available Surface Treatment Agents on Textile Wetting Behavior,” Coatings, 9(4), pp 219–229. doi:10.3390/coatings9040219
   Web of Science ®Google Scholar
• KRÜSS GmbH. (2006), “Upside Down: Surface Energy Measurement of Textiles by Captive Bubble Method.” Available at: https://www.kruss-scientific.com/fileadmin/user_upload/website/literature/kruss-ar251-en.pdf (accessed July 17, 2019).
   Google Scholar
• Cherif, C. (2011), Textile Werkstoffe für den Leichtbau: Techniken-Verfahren-Materialien-Eigenschaften [Textile Materials for Lightweight Construction: Techniques, Processes, Materials, Properties], Springer: Berlin.
   Google Scholar
• Slepickova Kasalkova, N., Slepicka, P., Kolska, Z., and Svorcik, V. (2015), Wettability and Other Surface Properties of Modified Polymers, Mahmood Aliofkhazraei, IntechOpen: London. Available at: https://www.intechopen.com/books/wetting-and-wettability/wettability-and-other-surface-properties-of-modified-polymers
   Google Scholar
• Volta, A. and Banks, J. (1800), “I. On the Electricity Excited by the Mere Contact of Conducting Substances of Different Kinds,” The Philosophical Magazine, 7(28), pp 289–311. doi:10.1080/14786440008562590
   Google Scholar
• Vilitis, O., Rutkis, M., Busenberg, J., and Merkulov, D. (2016), “Determination of Contact Potential Difference by the Kelvin Probe (Part I) I. Basic Principles of Measurements,” Latvian Journal of Physics and Technical Sciences, 53(2), pp 48–57. doi:10.1515/lpts-2016-0013
   Web of Science ®Google Scholar
• Vilitis, O., Rutkis, M., Busenbergs, J., and Merkulovs, D. (2016), “Determination of Contact Potential Difference by the Kelvin Probe (Part II) 2. Measurement System by Involving the Composite Bucking Voltage,” Latvian Journal of Physics and Technical Sciences, 53(6), pp 57–66. doi:10.1515/lpts-2016-0045
   Web of Science ®Google Scholar
• Rezende, C. A., Gouveia, R. F., da Silva, M. A., and Galembeck, F. (2009), “Detection of Charge Distributions in Insulator Surfaces,” Journal of Physics: Condensed Matter, 21(26), pp 263002. doi:10.1088/0953-8984/21/26/263002
   PubMed Web of Science ®Google Scholar
• Nonnenmacher, M., O’Boyle, M. P., and Wickramasinghe, H. K. (1991), “Kelvin Probe Force Microscopy,” Applied Physics Letters, 58(25), pp 2921–2923. doi:10.1063/1.105227
   Web of Science ®Google Scholar
• Jacobs, H. O., Knapp, H. F., and Stemmer, A. (1999), “Practical Aspects of Kelvin Probe Force Microscopy,” Review of Scientific Instruments, 70(3), pp 1756–1760. doi:10.1063/1.1149664
   Web of Science ®Google Scholar
• Kikukawa, A., Hosaka, S., and Imura, R. (1995), “Silicon pn Junction Imaging and Characterizations Using Sensitivity Enhanced Kelvin Probe Force Microscopy,” Applied Physics Letters, 66(25), pp 3510–3512. doi:10.1063/1.113780
   Web of Science ®Google Scholar
• Weaver, J. M. R. (1991), “High Resolution Atomic Force Microscopy Potentiometry,” Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, 9(3), pp 1559–1568. doi:10.1116/1.585423
   Web of Science ®Google Scholar
• Sadewasser, S. and Glatzel, T. (2018), Kelvin Probe Force Microscopy: From Single Charge Detection to Device Characterization, Springer-Verlag: Berlin Heidelberg.
   Google Scholar
• Technischer Überwachungsverein [TÜV], Société Générale de Surveillance [SGS]. (2011), “Verifikationsbericht Prüfbaustein #38208E [Verification Report Test Module # 38208E].” Technical Expert Certificate.
   Google Scholar
• DEKRA Exam. (2013), “Gutachten: Stellungnahme zu Elektrostatischen Aufladungen von Hydraulik- und Schmierflüssigkeiten: 13EXAM 10846 BVS-BI [Expert Opinion: Opinion on Electrostatic Charges from Hydraulic and Lubricating Fluids: 13EXAM 10846 BVS-BI].” Technical Expert Certificate.
   Google Scholar
• ASTM D2624-15. (2015), “Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels,” ASTM International: West Conshohocken, PA.
   Google Scholar
• ASTM D7042-16e3. (2016), “Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity),” ASTM International: West Conshohocken, PA.
   Google Scholar
• Morra, M., Della Volpe, C., and Siboni, S. (1999), Polymer Interfaces and Emulsions, Marcel Dekker: New York.
   Google Scholar
• Owens, D. K. and Wendt, R. C. (1969), “Estimation of the Surface Free Energy of Polymers,” Journal of Applied Polymer Science, 13(8), pp 1741–1747. doi:10.1002/app.1969.070130815
   Web of Science ®Google Scholar
• Good, R. J. (1993), “Contact Angle, Wettability and Adhesion,” International Journal of Adhesion and Adhesives, 14(1), pp 3–36.
   Google Scholar
• Suzuki, T., Takahashi, K., Kawasaki, M., and Kagami, T. (2014), “Specific Surface Free Energy of As-Grown and Polished Faces of Synthetic Quartz,” Journal of Crystallization Process and Technology, 4(4), pp 177–184. doi:10.4236/jcpt.2014.44022
   Google Scholar
• Wu, S. (1971), “Calculation of Interfacial Tension in Polymer Systems,” Journal of Polymer Science Part C: Polymer Symposia, 34(1), pp 19–30. doi:10.1002/polc.5070340105
   Google Scholar
• Jachowicz, J., Wis-Surel, G., and Garcia, M. L. (1985), “Relationship between Triboelectric Charging and Surface Modifications of Human Hair.” Journal of the Society of Cosmetic Chemists, 36, pp 189–212.
   Google Scholar
• Ahmed, A. and Aurrecoechea, J. (2007), Specification: Specification for Lubricating Oils for Use in Solar Gas Turbine Engines. Specification number ES 9-224. Solar Turbines-A Caterpillar Company: San Diego, CA.
   Google Scholar
• Kron, G. (2003), Ladungsträgertransport in Farbstoffsensibilisierten Solarzellen auf Basis von Nanoporösem TiO2 [Carrier Transport in Dye-Sensitized Solar Cells Based on Nanoporous TiO2], Dissertation. Fakultät Informatik, Elektrotechnik und Informationstechnik, Universität Stuttgart: Stuttgart.
   Google Scholar
• Schmitz, A., Duchowski, J. K., and Lang, T. (2014), “Verfahren zur Oberflächenbehan-Dung Eines Filtermediums [Method for the Surface Treatment of a Filter Medium],” German Patent DE 10 2012 020 615 A1.
   Google Scholar
• Duchowski, J. K. and Lang, T. (2019), “Method for Adapting a Filter Medium to Predefinable Parameters,” European Patent 15708437.7.
   Google Scholar
• Duchowski, J. K. and Lang, T. (2015), “Verfahren zur Anpassung Eines Filtermediums an Vorgebbare Parameter Sowie Vorzugsweise ein Nach Diesem Verfahren Hergestelltes Filtermedium [Procedure for Adaptation of a Filter Medium to Specifiable Parameters as well as Preferably One made by this Process Filter Media],” German Patent DE 10 2014 003 314.7.
   Google Scholar
• EDS-Systems. (2000), “Triboelectric Generation: Getting Charged.” Available at: http://esdsystems.descoindustries.com/Newsletters/v3issue10.html (accessed July 19, 2019).
   Google Scholar
• Galembeck, A., Costa, C. A. R., da Silva, M. C. V. M., Souza, E. F., and Galembeck, F. (2001), “Scanning Electric Potential Microscopy Imaging of Polymers: Electrical Charge Distribution in Di-Electrics,” Polymer, 42(11), pp 4845–4851. doi:10.1016/S0032-3861(00)00921-6
   Web of Science ®Google Scholar
• Galembeck, F., Costa, C. A. R., Galembeck, A., and da Silva, M. C. V. M. (2001), “Supramolecular Ionics: Electric Charge Partition within Polymers and Other Non-Conducting Solids,” Journal of Colloid and Interface Science, 73(4), pp 495–510. doi:10.1590/S0001-37652001000400003
   Google Scholar