References
- Oredsson, J. and Bernhardsson, S. (1983), “Performance of High Alloy Austenitic and Duplex Stainless Steel in Sour Gas and Oil Environment,” Materials Performance, 22, pp 35–42.
- Olsson, J. and Snis, M. (2007), “Duplex—A New Generation of Stainless Steels for Desalination Plants,” Desalination, 205, pp 104–113.
- Alvarez-Armas, I. (2008), “Duplex Stainless Steel: Brief History and Some Recent Alloys,” Recent Patents on Mechanical Engineering, 1, pp 51–57.
- Danoix, F., Chamberlan, S., Massoud, J. P., and Auger, P. (1991), “Influence of Ni, Mo and Other Elements on the Microstructural Evolution of the Ferritic Phase of Duplex Stainless Steel Aged at 300–4000 °C: An Atom Probe Investigation,” Duplex Stainless Steels Conference, Beaune, Bourgogne, France, October 28–30, 1991. Proc. Duplex Stainless Steels 91 Les Edition de Physique, France.
- Pardal, J. M., Maior Tavares, S. S., da Penha Cindra Fonseca, M., de Souza, J. A., Menezes Vieira, L., and Ferreira Gomes de Abreu, H. (2010), “Deleterious Phases Precipitation on Super Duplex Stainless Steel UNS S32750: Characterization by Light Optical and Scanning Electron Microscopy,” Materials Research, 13(3), pp 401–407. doi:10.1590/S1516-14392010000300020
- Lu, X.-C., Li, S., Jiang, X. (2001), “Effect of σ Phase in Stainless Steels on Corrosive Wear Behavior in Sulfuric Acid,” Wear, 251, pp 1234–1238. doi:10.1016/S0043-1648(01)00779-7
- Soares da Fonseca, G., de Oliveira, P. M., Garcia Diniz, M., Valerievitch Bubnoff, D., and de Castro, J. A. (2017), “Sigma Phase in Super Duplex Stainless Steel: Formation, Kinetics and Microstructural Path,” Materials Research, 20(1), pp 249–255. doi:10.1590/1980-5373-mr-2016-0436
- Fargas, G., Mestra, A., and Mateo, A. (2013), “Effect of Sigma Phase on Wear Behavior of a Super Duplex Stainless Steel,” Wear, 303, pp 584–590. doi:10.1016/j.wear.2013.04.010
- Pohl, M., Storz, O., and Glogowski, T. (2007), “Effect of Intermetallic Precipitation on the Properties of Duplex Stainless Steel,” Materials Characterization, 58, pp 65–71. doi:10.1016/j.matchar.2006.03.015
- Escriba, D. M., Materna-Morris, E., Plaut, R. L., and Padilha, A. F. (2009), “Chi Phase Precipitation in a Duplex Stainless Steel,” Materials Characterization, 60, pp 1214–1219. doi:10.1016/j.matchar.2009.04.013
- Llorca-Isern, N., Lopez-Luque, H., Lopez-Jimenez, I., and Biezma, M. V. (2016), “Identification of Sigma and Chi Phases in Duplex Stainless Steels,” Materials Characterization, 112, pp 20–29. doi:10.1016/j.matchar.2015.12.004
- Rosso, M., Peter, I., and Suani, D. (2013), “About Heat Treatment and Properties of Duplex Stainless Steels,” Journal of Achievements in Materials and Manufacturing Engineering, 59(1), pp 26–36.
- D1141-98. (2013), “Standard Practice for the Preparation of Substitute Ocean Water,” ASTM International: West Conshohocken, PA.
- Mendoza, B. I., Maldonado, Z. C., Albiter, H. A., and Robles, P. E. (2010), “Dissimilar Welding of Superduplex Stainless Steel/HSLA Steel for Offshore Applications Joined by GTAW,” Engineering, 2, pp 520–528. doi:10.4236/eng.2010.27069
- Bensaid, N., Benlamnouar, M. F., and Boutagane, A. (2014), “Microstructure and Mechanical Properties of Dissimilar GTA Weld between 2205 Duplex Stainless Steel and API X-70 HSLA,” International Conference on Physics of Advanced Materials (ICPAM-10), Iasi, Romania, September 22–28.
- Kappes, M. A. (2011), Evaluation of Thiosulfate as a Substitute for Hydrogen Sulfide in Sour Corrosion Fatigue Studies, Doctoral Thesis, Department of Materials Science and Engineering, The Ohio State University.
- Padilha, A. F., Plaut, R. L., and Rios, P. R. (2006), “Stainless Steel Heat Treatment,” Totten GE (Ed.), Steel Heat Treatment Handbook: Metallurgy and Technologies, Second Edition, pp 695–739, CRC Press: Boca Raton, FL.
- Bressan, J. D., Daros, D. P., Sokolowski, A., Mesquita, R. A., and Barbosa, C. A. (2008), “Influence of Hardness on the Wear Resistance of 17-4 PH Stainless Steel Evaluated by Pin on Disc Testing,” Journal of Material Processing Technology, 205, pp 353–359. doi:10.1016/j.jmatprotec.2007.11.251
- Venkatesh, R., Rao, V. S., Kumar, N. A., Biswas, S., Kumar, R. S. (2015), “Wear Analysis on Silicon Carbide Coated HSS Pin on SS Disc Substrate,” Procedia Materials Science, 10, pp 644–650. doi:10.1016/j.mspro.2015.06.057
- Hong, W., Cai, W., Wang, S., and Tomovic, M. M. (2018), “Mechanical Wear Debris Feature, Detection and Diagnosis: A Review,” Chinese Journal of Aeronautics, 31(5), pp 867–882. doi:10.1016/j.cja.2017.11.016