Simulation and Experimental Investigation on Friction Reduction by Partial Laser Surface Texturing on Piston Ring

References

• Nakada, M. (1994), “Trends in Engine Technology and Tribology,” Tribology International, 27(1), pp 3–8. doi:10.1016/0301-679X(94)90056-6
   Web of Science ®Google Scholar
• Knoll, G. D. and Peeken, H. J. (1982), “Hydrodynamic Lubrication of Piston Skirts,” Journal of Tribology, 104(4), pp 504–509. doi:10.1115/1.3253271
   Google Scholar
• Miltsios, G. K., Patterson, D. J., and Papanastasiou, T. C. (1989), “Solution of the Lubrication Problem and Calculation of the Friction Force on the Piston Rings,” Journal of Tribology, 111(4), pp 101–108. doi:10.1115/1.3261988
   Web of Science ®Google Scholar
• Hoshi, M., Baba, Y., and Furuhama, S. (1989), “A Study of Piston Friction Force in an Internal Combustion Engine (Number 2),” Tribology Transactions, 32(4), pp 453–460. doi:10.1080/10402008908981913
   Web of Science ®Google Scholar
• Karamış, M. B., Yıldızlı, K., and Çakırer, H. (2004), “An Evaluation of Surface Properties and Frictional Forces Generated from Al-Mo-Ni Coating on Piston Ring,” Applied Surface Science, 230(1–4), pp 191–200. doi:10.1016/j.apsusc.2004.02.053
   Web of Science ®Google Scholar
• Takiguchi, M., Machida, K., and Furuhama, S. (1988), “Piston Friction Force of a Small High Speed Gasoline Engine,” Journal of Tribology, 110(1), pp 112–118. doi:10.1115/1.3261548
   Web of Science ®Google Scholar
• Tang, W., Zhou, Y., Zhu, H., and Yang, H. (2013), “The Effect of Surface Texturing on Reducing the Friction and Wear of Steel under Lubricated Sliding Contact,” Applied Surface Science, 273(273), pp 199–204. doi:10.1016/j.apsusc.2013.02.013
   Web of Science ®Google Scholar
• Hamilton, D. B., Walowit, J. A., and Allen, C. M. (1966), “A Theory of Lubrication by Microirregularities,” Journal of Basic Engineering, 88(1), p 177. doi:10.1115/1.3645799
   Google Scholar
• Brown, S. R., Hamilton, G. M. and Moore, S. L. (1975), “Hydrodynamic Pressure Under a Piston Ring,” Nature, 253(5490), pp 341–342.
   Web of Science ®Google Scholar
• Costa, H. L. and Hutchings, I. M. (2007), “Hydrodynamic Lubrication of Textured Steel Surfaces under Reciprocating Sliding Conditions,” Tribology International, 40(8), pp 1227–1238. doi:10.1016/j.triboint.2007.01.014
   Web of Science ®Google Scholar
• Etsion, I. and Burstein, L. (1996), “A Model for Mechanical Seals with Regular Microsurface Structure,” Tribology Transactions, 39(3), pp 677–683. doi:10.1080/10402009608983582
   Web of Science ®Google Scholar
• Ronen, A., Etsion, I., and Kligerman, Y. (2001), “Friction-Reducing Surface-Texturing in Reciprocating Automotive Components,” Tribology Transactions, 44(3), pp 359–366. doi:10.1080/10402000108982468
   Web of Science ®Google Scholar
• Zhou, Y., Zhu, H., Tang, W., Ma, C., and Zhang, W. (2012), “Development of the Theoretical Model for the Optimal Design of Surface Texturing on Cylinder Liner,” Tribology International, 52(3), pp 1–6. doi:10.1016/j.triboint.2011.12.017
   Google Scholar
• Wakuda, M., Yamauchi, Y., Kanzaki, S., and Yasuda, Y. (2003), “Effect of Surface Texturing on Friction Reduction between Ceramic and Steel Materials under Lubricated Sliding Contact,” Wear, 254(3-4), pp 356–363. doi:10.1016/S0043-1648(03)00004-8
   Web of Science ®Google Scholar
• Etsion, I. (2004), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17(4), pp 733–737. doi:10.1007/s11249-004-8081-1
   Web of Science ®Google Scholar
• Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., and Valeri, S. (2008), “Tribological Effects of Surface Texturing on Nitriding Steel for High-Performance Engine Applications,” Wear, 265(7), pp 1046–1051. doi:10.1016/j.wear.2008.02.011
   Web of Science ®Google Scholar
• Rapoport, L., Moshkovich, A., Perfilyev, V., Gedanken, A., Koltypin, Yu., Sominski, E., Halperin, G., and Etsion, I. (2009), “Wear Life and Adhesion of Solid Lubricant Films on Laser-Textured Steel Surfaces,” Wear, 267(5), pp 1203–1207. doi:10.1016/j.wear.2009.01.053
   Web of Science ®Google Scholar
• Mourier, L., Mazuyer, D., Lubrecht, A. A., and Donnet, C. (2006), “Transient Increase of Film Thickness in Micro-Textured EHL Contacts,” Tribology International, 39(12), pp 1745–1756. doi:10.1016/j.triboint.2006.02.037
   Web of Science ®Google Scholar
• Ryk, G. and Etsion, I. (2006), “Testing Piston Rings with Partial Laser Surface Texturing for Friction Reduction,” Wear, 261(7-8), pp 792–796. doi:10.1016/j.wear.2006.01.031
   Web of Science ®Google Scholar
• Etsion, I. and Sher, E. (2009), “Improving Fuel Efficiency with Laser Surface Textured Piston Rings,” Tribology International, 42(4), pp 542–547. doi:10.1016/j.triboint.2008.02.015
   Web of Science ®Google Scholar
• Wang, X., Adachi, K., Otsuka, K., and Kato, K. (2006), “Optimization of the Surface Texture for Silicon Carbide Sliding in Water,” Applied Surface Science, 253(3), pp 1282–1286. doi:10.1016/j.apsusc.2006.01.076
   Web of Science ®Google Scholar
• Patir, N. and Cheng, H. S. (1978), “An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication,” Journal of Tribology, 100(1), pp 12–17. doi:10.1115/1.3453103
   Web of Science ®Google Scholar
• Patir, N. and Cheng, H. S. (1979), “Application of Average Flow Model to Lubrication between Rough Sliding Surfaces,” Journal of Tribology, 101(2), pp 95–95.
   Google Scholar
• Liang, X., Liu, Y., Shu, G. Q., Yuhan, Z., and Wang Y. (2014), “Elasto-Hydrodynamic Lubrication Performance of Cylinder Liner-Piston Ring and the Friction Experimental Verification,” SAE Technical Paper 2014-01-1668.
   Google Scholar
• Etsion, I., Kligerman, Y., and Halperin, G. (1999), “Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces,” Tribology Transactions, 42(3), pp 511–516. doi:10.1080/10402009908982248
   Web of Science ®Google Scholar
• Ryk, G., Kligerman, Y., and Etsion, I. (2002), “Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components,” Tribology Transactions, 45(4), pp 444–449. doi:10.1080/10402000208982572
   Web of Science ®Google Scholar
• Meng, F., Zhou, R., Davis, T., Cao, J., Wang, Q., Hua, D., and Liu, J. (2010), “Study on Effect of Dimples on Friction of Parallel Surfaces under Different Sliding Conditions,” Applied Surface Science, 256(9), pp 2863–2875. doi:10.1016/j.apsusc.2009.11.041
   Web of Science ®Google Scholar
• Koszela, W., Galda, L., Dzierwa, A., and Pawlus, P. (2010), “The Effect of Surface Texturing on Seizure Resistance of a Steel–Bronze Assembly,” Tribology International, 43(10), pp 1933–1942. doi:10.1016/j.triboint.2010.04.016
   Web of Science ®Google Scholar
• Grabon, W., Koszela, W., Pawlus, P., and Ochwat, S. (2013), “Improving Tribological Behaviour of Piston Ring–Cylinder Liner Frictional Pair by Liner Surface Texturing,” Tribology International, 61(61), pp 102–108. doi:10.1016/j.triboint.2012.11.027
   Google Scholar
• Halperin, I. E. G. (2002), “A Laser Surface Textured Hydrostatic Mechanical Seal,” Tribology Transactions, 45(3), pp 430–434. doi:10.1080/10402000208982570
   Web of Science ®Google Scholar
• Kligerman, Y., Shinkarenko, A., and Etsion, I. (2005), “Improving Tribological Performance of Piston Rings by Partial Surface Texturing,” Journal of Tribology, 127(3), pp 632–638. doi:10.1115/1.1866171
   Web of Science ®Google Scholar