Investigation of the Frictional Behavior in a Roller Linear Motion Guide under Mixed EHL

References

• Tao, W., Zhong, Y., Feng, H., and Wang, Y. (2013), “Model for Wear Prediction of Roller Linear Guides,” Wear, 305(1–2), pp 260–266. doi:10.1016/j.wear.2013.01.047
   Web of Science ®Google Scholar
• Zhu, D. and Wang, Q. J. (2011), “Elastohydrodynamic Lubrication: A Gateway to Interfacial Mechanics—Review and Prospect,” Journal of Tribology, 133(4). doi:10.1115/1.4004457
   PubMed Web of Science ®Google Scholar
• Hu, L., Wang, W. Z., Zhao, Z. Q., and Kong, L. J. (2013), “Lubricated Contact Analysis of Roller Large End-Flange in Double-Row Tapered Roller Bearing,” Tribology, 33(1), pp 22–28.
   Google Scholar
• Matsuyama, H. and Kamamoto, S. (2001), “Analysis of Frictional Torque in Raceway Contacts of Tapered Roller Bearings,” Koyo Engineering Journal English Edition, 159, pp 53–60.
   Google Scholar
• Cann, P. M. (2007), “Grease Lubrication of Rolling Element Bearings—Role of the Grease Thickener,” Lubrication Science, 19(3), pp 183–196. doi:10.1002/ls.39
   Google Scholar
• Cann, P. M. E., Damiens, B., and Lubrecht, A. (2004), “The Transition between Fully Flooded and Starved Regimes in EHL,” Tribology International, 37(10), pp 859–864. doi:10.1016/j.triboint.2004.05.005
   Web of Science ®Google Scholar
• Laurentis, N. D., Kadiric, A., Lugt, P., and Cann, P. (2017), “The Influence of Bearing Grease Composition on Friction in Rolling/Sliding Concentrated Contacts,” Tribology International, 94, pp 624–632. doi:10.1016/j.triboint.2015.10.012
   Web of Science ®Google Scholar
• Ai, S., Wang, W., Wang, Y., and Zhao, Z. (2015), “Temperature Rise of Double-Row Tapered Roller Bearings Analyzed with the Thermal Network Method,” Tribology International, 87, pp 11–22. doi:10.1016/j.triboint.2015.02.011
   Web of Science ®Google Scholar
• Ma, F., Li, Z., Qiu, S., Wu, B., and An, Q. (2016), “Transient Thermal Analysis of Grease-Lubricated Spherical Roller Bearings,” Tribology International, 93, pp 115–123. doi:10.1016/j.triboint.2015.09.004
   Web of Science ®Google Scholar
• Bălan, M. R. D., Stamate, V. C., Houpert, L., and Olaru, D. N. (2014), “The Influence of the Lubricant Viscosity on the Rolling Friction Torque,” Tribology International, 72, pp 1–12. doi:10.1016/j.triboint.2013.11.017
   Web of Science ®Google Scholar
• Houpert, L. (2002), “Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental Results,” Tribology Transactions, 45(3), pp 345–353. doi:10.1080/10402000208982559
   Web of Science ®Google Scholar
• Castro, J. and Seabra, J. (2008), “Global and Local Analysis of Gear Scuffing Tests Using a Mixed Film Lubrication Model,” Tribology International, 41(4), pp 244–255. doi:10.1016/j.triboint.2007.07.005
   Web of Science ®Google Scholar
• Biboulet, N. and Houpert, L. (2010), “Hydrodynamic Force and Moment in Pure Rolling Lubricated Contacts. Part 2: Point Contacts,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 224(8), pp 777–787. doi:10.1243/13506501JET791
   Web of Science ®Google Scholar
• Iwasaki, M., Maeda, Y., Kawafuku, M., and Hirai, H. (2006), “Precise Modeling of Rolling Friction in Ball Screw-Driven Table Positioning System,” IFAC Proceedings Volumes, 39(16), pp 295–300. doi:10.3182/20060912-3-DE-2911.00053
   Google Scholar
• Fujita, T., Matsubara, A., and Yamazaki, K. (2011), “Experimental characterization of Disturbance Force in a Linear Drive System with High-Precision Rolling Guideways,” International Journal of Machine Tools & Manufacture, 51(2), pp 104–111. doi:10.1016/j.ijmachtools.2010.11.005
   Web of Science ®Google Scholar
• Itagaki, H. and Tsutsumi, M. (2014), “Control System Design of a Linear Motor Feed Drive System Using Virtual Friction,” Precision Engineering, 38(2), pp 237–248. doi:10.1016/j.precisioneng.2013.09.002
   Web of Science ®Google Scholar
• Al-Bender, F. and Symens, W. (2005), “Characterization of Frictional Hysteresis in Ball-Bearing Guideways,” Wear, 258(11–12), pp 1630–1642. doi:10.1016/j.wear.2004.11.018
   Web of Science ®Google Scholar
• Tanaka, T., Otsuka, J., and Oiwa, T. (2009), “Precision Positioning Control by Modeling Frictional Behaviors of Linear Ball Guideway.”
   Google Scholar
• Chen, J. S., Chen, K. C., Lai, Z. C., and Huang, Y. K. (2003), “Friction Characterization and Compensation of a Linear-Motor Rolling-Guide Stage,” International Journal of Machine Tools & Manufacture, 43(9), pp 905–915. doi:10.1016/S0890-6955(03)00084-1
   Web of Science ®Google Scholar
• Albrecht, A. (2009), Wärmedehnungskompensierte Rekonstruktion von Prozesskräften an Vorschubantrieben, Vulkan.
   Google Scholar
• Jang, S. H., Khim, G., and Park, C. H. (2017), “Estimation of Friction Heat in a Linear Motion Bearing Using Box-Behnken Design,” International Journal of Advanced Manufacturing Technology, 89(5–8), pp 2021–2029. doi:10.1007/s00170-016-9165-4
   Web of Science ®Google Scholar
• Ohta, H., Sato, Y., and Ueki, Y. (2015), “Effects of Misaligned Rails on the Friction Force–Displacement Curves of a Linear Ball Bearing System in Low-Speed Operation,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 229(12), pp 1469–1478. doi:10.1177/1350650115581691
   Web of Science ®Google Scholar
• Oh, K.-J., Khim, G., Park, C.-H., and Chung, S.-C. (2018), “Explicit Modeling and Investigation of Friction Forces in Linear Motion Ball Guides,” Tribology International, 129, pp 16–28. doi:10.1016/j.triboint.2018.07.046
   Web of Science ®Google Scholar
• Cheng, D. J., Yang, W. S., Park, J. H., Park, T. J., Kim, S. J., Kim, G. H., et al. (2014), “Friction Experiment of Linear Motion Roller Guide THK SRG25,” International Journal of Precision Engineering and Manufacturing, 15(3), pp 545–551. doi:10.1007/s12541-014-0369-y
   Web of Science ®Google Scholar
• Cheng, D. J., Park, J. H., Suh, J. S., Kim, S. J., and Park, C. H. (2017), “Effect of Frictional Heat Generation on the Temperature Distribution in Roller Linear Motion Rail Surface,” Journal of Mechanical Science and Technology, 31(3), pp 1477–1487. doi:10.1007/s12206-017-0247-5
   Web of Science ®Google Scholar
• Cheng, D.-J., Park, T.-J., and Kim, S.-J. (2018), “Improved Friction Model for the Roller LM Guide Considering Mechanics Analysis,” Journal of Mechanical Science and Technology, 32(6), pp 2723–2734. doi:10.1007/s12206-018-0529-6
   Web of Science ®Google Scholar
• Rexroth Bosch Group. (2017), Linear Motion Technology Handbook.
   Google Scholar
• Shimizu, S. (2012), “A New Life Theory for Rolling Bearings—By Linkage between Rolling Contact Fatigue and Structural Fatigue,” Tribology Transactions, 55(5), pp 558–570. doi:10.1080/10402004.2012.681342
   Web of Science ®Google Scholar
• (2013), THK Linear Motion System Catalog, THK Co.: Toyko.
   Google Scholar
• Houpert, L. (2001), “An Engineering Approach to Hertzian Contact Elasticity—Part I,” Journal of Tribology, 123(3), pp 582. doi:10.1115/1.1308043
   Web of Science ®Google Scholar
• Catalogue S. 6000 EN, SKF. Availble at: https://scholar.google.pt/scholar?Hl=pt-PT&as_sdt=0,5&q=skf+general+catalog#0
   Google Scholar
• Gonçalves, D., Cousseau, T., Gama, A., Campos, A. V., and Seabra, J. H. O. (2017), “Friction Torque in Thrust Roller Bearings Lubricated with Greases, Their Base Oils and Bleed-Oils,” Tribology International, 107, pp 306–319. doi:10.1016/j.triboint.2016.11.041
   Web of Science ®Google Scholar
• Harris, T. A. and Kotzalas, M. N. (2007), Advanced Concepts of Bearing Technology: Rolling Bearing Analysis, 5th ed., CRC Press.
   Google Scholar
• Harris, T. A. (2000), Rolling Bearing Analysis, 4th ed., Wiley-Interscience.
   Google Scholar
• Tallian, T. E. (1981), “Rolling Bearing Life Modifying Factors for Film Thickness, Surface Roughness, and Friction,” Journal of Tribology, 103(4), pp 509. doi:10.1115/1.3251724
   Google Scholar
• Zhou, R. S. and Hoeprich, M. R. (1991), “Torque of Tapered Roller Bearings,” Journal of Tribology, 113(3), pp 590–597. doi:10.1115/1.2920664
   Web of Science ®Google Scholar
• Olaru, D. N., Lorenz, P., Rudy, D., Prisacaru, G., and Antălucă, D. (2004), “Friction in the Circular-Arc Grooves Linear Rolling Guidance System,” Tribologie und Schmierungstechnik, 51(2).
   Google Scholar
• Pan, P. and Hamrock, B. J. (1989), “Simple Formulas for Performance Parameters Used in Elastohydrodynamically Lubricated Line Contacts,” Journal of Tribology, 111(2), pp 246. doi:10.1115/1.3261900
   Web of Science ®Google Scholar
• Ghosh, M. K. and Pandey, R. K. (1998), “Lubrication of Heavily Loaded Line Contacts—An Element Inlet Zone Analysis,” Journal of Tribology, 120, pp 119–125. doi:10.1115/1.2834174
   Web of Science ®Google Scholar
• Palacios, J. M. and Palacios, M. P. (1984), “Rheological Properties of Greases in EHD Contacts,” Tribology International, 17(3), pp 167–171. doi:10.1016/0301-679X(84)90010-0
   Web of Science ®Google Scholar
• Bentall, R. H. and Johnson, K. L. (1967), “Slip in the Rolling Contact of Two Dissimilar Elastic Rollers,” International Journal of Mechanical Science, 9, pp 389–404. doi:10.1016/0020-7403(67)90043-4
   Google Scholar
• Deng, S. E., Jia, Q. Y., and Xie, J. X. (2014), Design Principles of Rolling Element Bearings, 1st ed., Standards Press of China: Beijing.
   Google Scholar
• Bhushan, B. (2013), Introduction to Tribology, John Wiley & Sons.
   Google Scholar
• Neis, P. D., Baets, P. D., Ost, W., Delgado, Y. P., Loccufier, M., Al-Bender, F., et al. (2011), “Investigation of the Dynamic Response in a Dry Friction Process Using a Rotating Stick–Slip Tester,” Wear, 271(9–10), pp 2640–2650. doi:10.1016/j.wear.2010.11.022
   Web of Science ®Google Scholar
• Zhang, X. G., Sangarapillai, K., Wu, T. H., and Peng, Z. X. (2017), “Frictional Behavior and Friction Mechanisms of Rolling–Sliding Contact in Mixed EHL,” Tribology International, 114, pp 201–207. doi:10.1016/j.triboint.2017.04.032
   Web of Science ®Google Scholar
• Zhang, X. G., Li, Z. X., and Wang, J. M. (2017), “Friction Prediction of Rolling–Sliding Contact in Mixed EHL,” Measurement, 100, pp 262–269.
   Web of Science ®Google Scholar