Analysis of Novel Nano-composite Coating for Varied Combinations of YSZ_1–x–y, TiN_x, SiN_y

References

• Lin, Y. C., Huang, J., He, D. G., Zhang, X. Y., Wu, Q., Wang, L. H., and Zhou, K. C., (2019), “Phase Transformation and Dynamic Recrystallization Behaviors in a Ti55511 Titanium Alloy during Hot Compression,” Journal of Alloys and Compounds, 795, pp 471–482. doi:10.1016/j.jallcom.2019.04.319
   Web of Science ®Google Scholar
• Donnet, C. and Erdemir. A. (2004), “Historical Developments and New Trends in Tribological and Solid Lubricant Coatings,” Surface and Coatings Technology, 180, pp 76–84. doi:10.1016/j.surfcoat.2003.10.022
   Web of Science ®Google Scholar
• Beresnev, V. M., Pogrebnjak, A. D., Turbin, P. V., and Litovchenko, S. V. (2010), “Thermal Stability of the Phase Composition, Structure, and Stressed State of Ion-Plasma Condensates in the Zr-Ti-Si-N System,” Technical Physics, 55(6), pp 871–873. doi:10.1134/S1063784210060216
   Web of Science ®Google Scholar
• Kim, G., Kim, B., Lee, S., and Hahn, J. (2005), “Structure and Mechanical Properties of Cr-Zr-N Films Synthesized by Closed Field Unbalanced Magnetron Sputtering with Vertical Magnetron Sources,” Surface and Coatings Technology, 200(5-6), pp 1669–1675. doi:10.1016/j.surfcoat.2005.08.101
   Web of Science ®Google Scholar
• Aihua, L., Jianxin, D., Haibing, C., Yangyang, C., and Jun, Z. (2012), “Friction and Wear Properties of TiN, TiAlN, AlTiN and CrAlN PVD Nitride Coatings,” International Journal of Refractory Metals and Hard Materials, 31, pp 82–88. doi:10.1016/j.ijrmhm.2011.09.010
   Web of Science ®Google Scholar
• Sun, F. J., Qu, S. G., Pan, Y. X., Li, X. Q., and Li, F. L. (2015), “Effects of Cutting Parameters on Dry Machining Ti-6Al-4V Alloy with Ultra-Hard Tools,” International Journal of Advanced Manufacturing Technology, 79(1-4), pp 351–360. doi:10.1007/s00170-014-6717-3
   Web of Science ®Google Scholar
• Gao, Y., Wang, G., and Liu, B. (2016), “Chip Formation Characteristics in the Machining of Titanium Alloys: A Review,” International Journal of Machining and Machinability of Materials, 18(1-2), pp 155–184. doi:10.1504/IJMMM.2016.075467
   Google Scholar
• Zhang, S., Li, J. F., Deng, J. X., and Li, Y. S. (2009), “Investigation on Diffusion Wear during High-Speed Machining Ti-6Al-4V Alloy with Straight Tungsten Carbide Tools,” The International Journal of Advanced Manufacturing Technology, 44(1–2), pp 17–25. doi:10.1007/s00170-008-1803-z
   Web of Science ®Google Scholar
• Luo, D. B., Fridrici, V., and Kapsa, P. (2011), “A Systematic Approach for the Selection of Tribological Coatings,” Wear, 271(9–10), pp 2132–2143. doi:10.1016/j.wear.2010.11.049
   Web of Science ®Google Scholar
• Endrino, J. L. and Deringer, V. (2005), “The Influence of Alloying Elements on the Phase Stability and Mechanical Properties of AlCrN Coatings,” Surface and Coatings Technology, 200(1–4), pp 988–992. doi:10.1016/j.surfcoat.2005.02.196
   Web of Science ®Google Scholar
• Hogmark, S., Jacobson, S., and Larsson, M. (2000), “Design and Evaluation of Tribological Coatings,” Wear, 246(1–2), pp 20–33. doi:10.1016/S0043-1648(00)00505-6
   Web of Science ®Google Scholar
• Patscheider, J. (2003), “Nanocomposite Hard Coatings for Wear Protection,” MRS Bulletin, 28(3), pp 180–183. doi:10.1557/mrs2003.59
   Web of Science ®Google Scholar
• Zhang, S., Wang, H. L., Ong, S. E., Sun, D., and Bui, X. L. (2007), “Hard Yet Tough Nanocomposite Coatings—Present Status and Future Trends,” Plasma Processes and Polymers, 4(3), pp 219–228. doi:10.1002/ppap.200600179
   Web of Science ®Google Scholar
• Jehn, H. A. (2000), “Multicomponent and Multiphase Hard Coatings for Tribological Applications,” Surface and Coatings Technology, 131(1–3), pp 433–440.
   Web of Science ®Google Scholar
• Lv, H., Zhao, W., An, Q., Nie, P., Wang, J., and Chu, P. K. (2009), “Nanomechanical Properties and Microstructure of ZrO2/Al2O3 Plasma Sprayed Coatings,” Materials Science and Engineering: A, 518(1–2), pp 185–189. doi:10.1016/j.msea.2009.05.043
   Web of Science ®Google Scholar
• Vassen, R., Cao, X., Tietz, F., Basu, D., and Stover, D. (2000), “Zirconates as New Materials for Thermal Barrier Coatings,” Journal of the American Ceramic Society, 83(8), pp 2023–2028. doi:10.1111/j.1151-2916.2000.tb01506.x
   Web of Science ®Google Scholar
• Wo, P. C., Munroe, P. R., Zhou, Z. F., Li, K. Y., and Xie, Z. H. (2010), “Effects of TiN Sublayers on the Response of TiSiN Nanocomposite Coatings to Nanoidentation and Scratching Contacts,” Materials Science and Engineering: A, 527(16–17), pp 4447–4457.
   Web of Science ®Google Scholar
• Zhang, S. and Zhu, W. (1993), “TiN Coating of Tool Steels: A Review,” Journal of Materials Processing Technology, 39(1–2), pp 165–177. doi:10.1016/0924-0136(93)90016-Y
   Web of Science ®Google Scholar
• PalDey, S. C. D. S. and Deevi, S. C. (2003), “Single Layer and Multilayer Wear Resistant Coatings of (Ti, Al) N: A Review,” Materials Science and Engineering: A, 342(1–2), pp 58–79. doi:10.1016/S0921-5093(02)00259-9
   Web of Science ®Google Scholar
• Qiu, L., Du, Y., Wang, S., Li, K., Yin, L., Wu, L., and Albir, L. (2019), “Mechanical Properties and Oxidation Resistance of Chemically Vapor Deposited TiSiN Nanocomposite Coating with Thermodynamically Designed Compositions,” International Journal of Refractory Metals and Hard Materials, 80, pp 30–39.
   Web of Science ®Google Scholar
• Misra, D., Dhakar, B., Anusha, E., Shari, S. M., Mukhopadhyay, S., and Chatterjee, S. (2018), “Evaluation of Nanomechanical and Tribological Properties of Laser Surface Alloyed Boridenitride-Carbide Ceramic Matrix Composite Coatings,” Ceramics International, 44(14), pp 17050–17061. doi:10.1016/j.ceramint.2018.06.149
   Web of Science ®Google Scholar
• Jesuraj, S. A., Kuppusami, P., Dharini, T., Panda, P., and Devapal, D. (2018), “Effect of Substrate Temperature on Microstructure and Nanomechanical Properties of Gd2Zr2O7 Coatings Prepared by EB-PVD Technique,” Ceramics International, 44(15), pp 18164–18172. doi:10.1016/j.ceramint.2018.07.024
   Web of Science ®Google Scholar
• Ou, Y. X., Chen, H., Li, Z. Y., Lin, J., Pan, W., and Lei, M. K. (2018), “Microstructure and Tribological Behavior of TiAlSiN Coatings Deposited by Deep Oscillation Magnetron Sputtering,” Journal of the American Ceramic Society, 101(11), pp 5166–5176. doi:10.1111/jace.15769
   Web of Science ®Google Scholar
• Stoyanov, P., Schneider, J., Rinke, M., Ulrich, S., Nold, E., Dienwiebel, M., and Stuber, M. (2017), “Microstructure, Mechanical Properties and Friction Behavior of Magnetron Sputtered VC Coatings,” Surface and Coatings Technology, 321, pp 366–377.
   Web of Science ®Google Scholar
• Ge, F., Jia, C., Li, K., Li, P., Zhu, P., Shao, T., and Huang, F. (2018), “High Wear Resistanceof Magnetron Sputtered Cr80 Si 20 N Nanocomposite Coatings: Almost Independent of Hardness,” Tribology Letters, 66(2), pp 70–77.
   Web of Science ®Google Scholar
• Jadhav, P. M. and Reddy, N. S. K. (2018), “Wear Behavior of Carbide Tool Coated with Yttria-Stabilized Zirconia Nano Particles,” IOP Conference Series: Materials Science and Engineering, Vol. 346, Dubai, UAE: IOP Publishing. doi:10.1088/1757-899X/346/1/012007
   Google Scholar
• Paturi, U. M. R. and Narala, S. K. R. (2015), “Experimental Investigation to Study the Effect of Electrostatic Micro-Solid Lubricant-Coated Carbide Tools on Machinability Parameters in Turning,” Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture, 229(5), pp 693–702.
   Web of Science ®Google Scholar
• Bailey, A. G. (1998), “The Science and Technology of Electrostatic Powder Spraying, Transport and Coating,” Journal of Electrostatics, 45(2), pp 85–120. doi:10.1016/S0304-3886(98)00049-7
   Web of Science ®Google Scholar
• Paturi, U. R. and Reddy, N. S. K. (2012), “Investigation on Wear Behavior of Electrostatic Micro-Solid Lubricant Coatings under Dry Sliding Conditions,” ASME 2012 International Mechanical Engineering Congress and Exposition, pp 2105–2110, Houston, Texas: American Society of Mechanical Engineers.
   Google Scholar
• Hanemann, T, and Szabo, D. V. (2010), “Polymer-Nanoparticle Composites: From Synthesis to Modern Applications,” Materials, 3(6), pp 3468–3517. doi:10.3390/ma3063468
   Web of Science ®Google Scholar
• Jonsson, B. and Hogmark, S. (1984), “Hardness Measurements of Thin Films,” Thin Solid Films, 114(3), pp 257–269. doi:10.1016/0040-6090(84)90123-8
   Web of Science ®Google Scholar
• Moore, A. J. W. and Tegart, W. M. (1952), “Relation between Friction and Hardness,” Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 212(1111), pp 452–458.
   Google Scholar
• Chim, Y. C., Ding, X. Z., Zeng, X. T., and Zhang, S. (2009), “Oxidation Resistance of TiN, CrN, TiAlN and CrAlN Coatings Deposited by Lateral Rotating Cathode Arc,” Thin Solid Films, 517(17), pp 4845–4849. doi:10.1016/j.tsf.2009.03.038
   Web of Science ®Google Scholar
• Bouzakis, K. D., Bouzakis, E., Kombogiannis, S., Paraskevopoulou, R., Skordaris, G., Makrimallakis, S., and Andersson, J. M. (2013), “Effect of Silicon Content on PVD Film Mechanical Properties and Cutting Performance of Coated Cemented Carbide Inserts,” Surface and Coatings Technology, 237, pp 379–389. doi:10.1016/j.surfcoat.2013.06.044
   Web of Science ®Google Scholar
• Brady, M. P., Wright, I. G., and Gleeson, B. (2000), “Alloy Design Strategies for Promoting Protective Oxide-Scale Formation,” Journal of the Minerals Metals & Materials Society, 52(1), pp 16–21. doi:10.1007/s11837-000-0109-x
   Web of Science ®Google Scholar
• Kagnaya, T., Boher, C., Lambert, L., Lazard, M., and Cutard, T. (2009), “Wear Mechanisms of WC-Co Cutting Tools from High-Speed Tribological Tests,” Wear, 267(5-8), pp 890–897. doi:10.1016/j.wear.2008.12.035
   Web of Science ®Google Scholar
• Ibrahim, G. A., Haron, C. C., and Ghani, J. A. (2009), “The Effect of Dry Machining on Surface Integrity of Titanium Alloy Ti-6Al-4V ELI,” Journal of Applied Sciences, 9(1), pp 121–127. doi:10.3923/jas.2009.121.127
   Google Scholar
• Çelik, Y. H., Kilickap, E., and Güney, M. (2017), “Investigation of Cutting Parameters Affecting on Tool Wear and Surface Roughness in Dry Turning of Ti-6Al-4V Using CVD and PVD Coated Tools,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(6), pp 2085–2093. doi:10.1007/s40430-016-0607-6
   Web of Science ®Google Scholar
• Thouless, M. D. (1991), “Cracking and Delamination of Coatings,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 9(4), pp 2510–2515. doi:10.1116/1.577265
   Web of Science ®Google Scholar
• Holmberg, K., Ronkainen, H., and Matthews, A. (1993), “Wear Mechanisms of Coated Sliding Surfaces,” Tribology Series, 25, pp 399–407.
   Google Scholar
• Akbulut, M. (2012), “Nanoparticle-Based Lubrication Systems,” Journal of Powder Metallurgy and Mining, 1(1), pp 1–3. doi:10.4172/2168-9806.1000e101
   Google Scholar
• Lim, S. C., Ashby, M. F., and Brunton, J. H. (1989), “The Effects of Sliding Conditions on the Dry Friction of Metals,” Acta Metallurgica, 37(3), pp 767–772. doi:10.1016/0001-6160(89)90003-5
   Google Scholar
• Mohanty, M., Smith, R. W., De Bonte, M., Celis, J. P., and Lugscheider, E. (1996), “Sliding Wear Behavior of Thermally Sprayed 75/25 Cr3C2/NiCr Wear Resistant Coatings,” Wear, 198(1–2), pp 251–266. doi:10.1016/0043-1648(96)06983-9
   Web of Science ®Google Scholar
• Hasegawa, H., Kimura, A., and Suzuki, T. (2000), “Microhardness and Structural Analysis of (Ti, Al) N,(Ti, Cr) N,(Ti, Zr) N and (Ti, V) N Films,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 18(3), pp 1038–1040. doi:10.1116/1.582296
   Web of Science ®Google Scholar
• Lee, J. W., Chang, S. T., Chen, H. W., Chien, C. H., Duh, J. G., and Wang, C. J. (2010), “Microstructure, Mechanical and Electrochemical Properties Evaluation of Pulsed DC Reactive Magnetron Sputtered Nanostructured Cr-Zr-N and Cr-Zr-Si-N Thin Films,” Surface and Coatings Technology, 205(5), pp 1331–1338. doi:10.1016/j.surfcoat.2010.09.005
   Web of Science ®Google Scholar
• Slokar, L., Matkovic, T., and Matkovic, P. (2012), “Alloy Design and Property Evaluation of New Ti-Cr-Nb Alloys,” Materials & Design, 33, pp 26–30. doi:10.1016/j.matdes.2011.06.052
   Web of Science ®Google Scholar