On the Modeling of Wear in Grease-Lubricated Spherical Roller Bearings

References

• El-Thalji, I. and Jantunen E. (2014), “A Descriptive Model of Wear Evolution in Rolling Bearings,” Engineering Failure Analysis, 45, pp 204–224. doi:10.1016/j.engfailanal.2014.06.004
   Web of Science ®Google Scholar
• Olofsson, U., Andersson, S., and Björklund, S. (2000), “Simulation of Mild Wear in Boundary Lubricated Spherical Roller Thrust Bearings,” Wear, 241(2), pp 180–185. doi:10.1016/S0043-1648(00)00373-2
   Web of Science ®Google Scholar
• Milne, C. D. and Meehan, P. A. (Eds.). (2016), “Wear Simulation for Boundary Lubricated, Radially Loaded, Spherical Roller Bearings,” 2nd Australasian Acoustical Societies Conference, Acoustics, 9–11 November 2016, Brisbane, Australia.
   Google Scholar
• Hao, L. and Meng, Y. (2015), “Numerical Prediction of Wear Process of an Initial Line Contact in Mixed Lubrication Conditions,” Tribology Letters, 60(2), pp 1–16. doi:10.1007/s11249-015-0609-z
   Web of Science ®Google Scholar
• Sojoudi, H. and Khonsari, M. M. (2010), “On the Behavior of Friction in Lubricated Point Contact with Provision for Surface Roughness,” Journal of Tribology, 132(1), pp 1–8. doi:10.1115/1.4000306
   Web of Science ®Google Scholar
• Masjedi, M. and Khonsari, M. M. (2014), “Theoretical and Experimental Investigation of Traction Coefficient in Line-Contact EHL of Rough Surfaces,” Tribology International, 70, pp 179–189. doi:10.1016/j.triboint.2013.10.004
   Web of Science ®Google Scholar
• Schipper, D. J. and Faraon, I. C. (2007), “Stribeck Curve for Starved Line Contacts,” Journal of Tribology, 129(1), pp 181–187. doi:10.1115/1.2404964
   Web of Science ®Google Scholar
• Liu, Q., Napel, W. T., Tripp, J. H., Lugt, P. M., and Meeuwenoord, R. (2009), “Friction in Highly Loaded Mixed Lubricated Point Contacts,” Tribology Transactions, 52(3), pp 360–369. doi:10.1080/10402000802563133
   Web of Science ®Google Scholar
• Gelinck, E. R. M. and Schipper, D. J. (2000), “Calculation of Stribeck Curves for Line Contacts,” Tribology International, 33(3), pp 175–181. doi:10.1016/S0301-679X(00)00024-4
   Web of Science ®Google Scholar
• Johnson, K. L., Greenwood, J. A., and Poon, S. Y. (1972), “A Simple Theory of Asperity Contact in Elastohydro-Dynamic Lubrication,” Wear, 19(1), pp 91–108. doi:10.1016/0043-1648(72)90445-0
   Web of Science ®Google Scholar
• Chevalier, F., Lubrecht, A. A., Cann, P. M. E., Colin, F., and Dalmaz, G. (1998), “Film Thickness in Starved EHL Point Contacts,” Journal of Tribology, 120(1), pp 126–132. doi:10.1115/1.2834175
   Web of Science ®Google Scholar
• Van Zoelen, M. T., Venner, C. H., and Lugt, P. M. (2009), “Prediction of Film Thickness Decay in Starved Elasto-Hydrodynamically Lubricated Contacts Using a Thin Layer Flow Model,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 223(3), pp 541–552. doi:10.1243/13506501JET524
   Google Scholar
• Van Zoelen, M. T., Venner, C. H., and Lugt, P. M. (2010), “The Prediction of Contact Pressure–Induced Film Thickness Decay in Starved Lubricated Rolling Bearings,” Tribology Transactions, 53(6), pp 831–841. doi:10.1080/10402004.2010.492925
   Web of Science ®Google Scholar
• Lugt, P. M. (2012), Lubrication Mechanisms. Grease Lubrication in Rolling Bearings, Chichester, West Sussex, U.K.: John Wiley & Sons Ltd.
   Google Scholar
• Wikström, V. and Jacobson, B. (1997), “Loss of Lubricant from Oil-Lubricated Near-Starved Spherical Roller Bearings,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 211(1), pp 51–66. doi:10.1243/1350650971542318
   Google Scholar
• Damiens, B., Venner, C. H., Cann, P. M. E., and Lubrecht, A. A. (2004), “Starved Lubrication of Elliptical EHD Contacts,” Journal of Tribology, 126(1), pp 105–111. doi:10.1115/1.1631020
   Web of Science ®Google Scholar
• Baart, P., van der Vorst, B., Lugt, P. M., van Ostayen, R. A. J. (2010), “Oil-Bleeding Model for Lubricating Grease Based on Viscous Flow through a Porous Microstructure,” Tribology Transactions, 53(3), pp 340–348. doi:10.1080/10402000903283326
   Web of Science ®Google Scholar
• Venner, C. H., van Zoelen, M. T., Lugt, P. M. (2012), “Thin Layer Flow and Film Decay Modeling for Grease Lubricated Rolling Bearings,” Tribology International, 47, pp 175–187. doi:10.1016/j.triboint.2011.10.019
   Web of Science ®Google Scholar
• Cann, P. M. (1996), “Starvation and Reflow in a Grease-Lubricated Elastohydrodynamic Contact,” Tribology Transactions, 39(3), pp 698–704. doi:10.1080/10402009608983585
   Web of Science ®Google Scholar
• Lugt, P. M., Lugt, P. M., Velickov, S., and Tripp, J. H. (2009), “On the Chaotic Behavior of Grease Lubrication in Rolling Bearings,” Tribology Transactions, 52(5), pp 581–590. doi:10.1080/10402000902825713
   Web of Science ®Google Scholar
• Damiens, B., Lubrecht, A. A., and Cann, P. M. (2004), “Influence of Cage Clearance on Bearing Lubrication,” Tribology Transactions, 47(1), pp 2–6. doi:10.1080/05698190490279128
   Web of Science ®Google Scholar
• Gershuni, L., Larson, M., and Lugt, P. (2008), “Lubricant Replenishment in Rolling Bearing Contacts,” Tribology Transactions, 51(5), pp 643–651. doi:10.1080/10402000802192529
   Web of Science ®Google Scholar
• Baart, P., Van zoelen, M. T., Lugt, P. M. (2013), “Film Thickness Model for Grease-Lubricated Bearing Seals with an Axial Contacting Lip,” Tribology Transactions, 56(1), pp 109–114. doi:10.1080/10402004.2012.729297
   Web of Science ®Google Scholar
• Damiens, B. (2004), “Starved Lubrication of Elliptical EHD Contacts,” Journal of Tribology, 126(1), pp 105–111. doi:10.1115/1.1631020
   Web of Science ®Google Scholar
• Huang, L., Guo, D., and Wen, S. Z. (2016), “Film Thickness Decay and Replenishment in Point Contact Lubricated with Different Greases: A Study into Oil Bleeding and the Evolution of Lubricant Reservoir,” Tribology International, 93, pp 620–627. doi:10.1016/j.triboint.2014.11.005
   Web of Science ®Google Scholar
• Bowden, F. P., Leben, L., and Taylor, G. I. (1997), The friction of lubricated metals,” Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 239:1–27. doi:10.1098/rsta.1940.0007
   Google Scholar
• Adamson, A. W. (1976). Physical chemistry of surfaces. New York: Interscience.
   Google Scholar
• Stolarski, T. A. (1996), “A System for Wear Prediction in Lubricated Sliding Contacts,” Lubrication Science, 8(4), pp 315–350. doi:10.1002/ls.3010080402
   Google Scholar
• Dowson, D. and Higginson, G. R. (1966), Elasto-Hydrodynamic Lubrication. Oxford: Pergamon Press
   Google Scholar
• Roelands, C. (1996), Correlation Aspects of the Viscosity–Temperature–Pressure Relationship of Lubricating Oils. PhD Thesis from TUDelft. https://repository.tudelft.nl/islandora/object/uuid:1fb56839-9589-4ffb-98aa-4a20968d1f90?collection=research
   Google Scholar
• Lin, C.-L. and Meehan, P. (Eds.). (2018), “Study of Wear Debris in Grease-Lubricated Axle Bearings Using SEM/EDX Analytical Technique,” Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 24–27 September 2018, Delft, The Netherlands.
   Google Scholar
• Oh, H., Azarian, M. H., Morillo, C., Pecht, M., and Rhem, E. (2015), “Failure Mechanisms of Ball Bearings under Lightly Loaded, Non-Accelerated Usage Conditions,” Tribology International, 81, pp 291–299. doi:10.1016/j.triboint.2014.09.014
   Web of Science ®Google Scholar