A Near-Frictionless Sealing Approach with Innovative, Gas-Lubricated Shaft Seals Made of Elastomer

References

• DIN3760 (1996), “Radial-Wellendichtringe” (“Rotary Shaft Lip Seals”), Technical Standard.
   Google Scholar
• DIN3761 (1984), “Radial-Wellendichtringe für Kraftfahrzeuge” (“Rotary Shaft Lip Seals for Motor Vehicles”), Technical Standard.
   Google Scholar
• ISO6194 (2009), “Rotary Shaft Lip-Type Seals Incorporating Elastomeric Sealing Elements,” Technical Standard.
   Google Scholar
• Schallamach, A. (1971), “How Does Rubber Slide?,” Wear 17. doi:https://doi.org/10.1016/0043-1648(71)90033-0
   Google Scholar
• Kammüller, M. (1986), “Zum Abdichtverhalten von Radialwellendichtringen” (“On the Sealing Behavior of Rotary Shaft Seals”), Doctoral Thesis, University of Stuttgart, Germany
   Google Scholar
• Kawahara, Y. (1977), “A Study of Sealing Phenomena on Oil Seals,” Proceedings of the ASLE/ASME Lubrication Conference, American Society of Lubrication Engineers.
   Google Scholar
• Kawahara, Y., Abe, M., Hirabayashi, H., and Matsushima, A. (1978), “Effect of Surface Condition of Lip on Sealing Phenomena of Oil Seals,” SAE Technical Paper.
   Google Scholar
• Müller, H. K. (1987), “Concepts of Sealing Mechanism of Rubber Lip Type Rotary Shaft Seals,” Proceedings of the 11th International Conference on Fluid Sealing, BHRA.
   Google Scholar
• Jenisch, B., Müller, H. K., and Hoffmann, C. (1991), “Neue Erkenntnisse über das Dichtverhalten von Radialwellendichtringen und PTFE-Manschettendichtringen” (“New Findings on the Sealing Behaviour of Rotary Shaft Seals and PTFE Sleeve Sealing Rings”), ATZ Automobiltechnische Zeitschrift, Springer, 2, pp 68–73.
   Google Scholar
• Ott, G. W. (1983), “Untersuchungen zum dynamischen Leckage- und Reibverhalten von Radial-Wellendichtringen” (“Investigations of the Dynamic Leakage and Friction Behavior of Rotary Shaft Seals”), Doctoral Thesis, University of Stuttgart, Germany.
   Google Scholar
• Schulz, M., Baumann, M., and Bauer, F. (2020), “Influence of Different Shaft Surface Finishes on the Lubrication and Friction Condition of Elastomeric Lip Seals,” Proceedings of the 7th International Conference “Integrity-Reliability-Failure,” Funchal/Portugal, September 2020, pp 351–368.
   Google Scholar
• Dakov, N. (2020), “Elastohydrodynamische Simulation von Wellendichtungen am Beispiel der PTFE-Manschettendichtung mit Rückförderstrukturen” (“Elastohydrodynamic Lubrication Analysis of Shaft Seals on the Example of the PTFE Lip Seal with Sealing Aids”), Doctoral Thesis, University of Stuttgart, Germany.
   Google Scholar
• Freudenberg Sealing Technologies (2020), “Energy Saving Seals—ESS,™” https://www.fst.com/-/media/files/sales%20sheets/fst%20energy_saving_seals.pdf (accessed October 28, 2020).
   Google Scholar
• Bauer, F. (2008), “PTFE-Manschettendichtungen mit Spiralrille—Analyse, Funktionsweise und Erweiterung der Einsatzgrenzen” (“PTFE Lip Seals with Spiral Groove—Analysis, Functioning Principle and Extension of Application Limits”), Doctoral Thesis, University of Stuttgart, Germany.
   Google Scholar
• Lebeck, A. O. (1991), Principles and Design of Mechanical Face Seals, Wiley: New York, NY.
   Google Scholar
• Muijderman, E. A. (1965), “Spiral Groove Bearings,” Industrial Lubrication and Tribology. doi:https://doi.org/10.1108/eb052769
   Google Scholar
• Ruan, B. (2002), “Numerical Modeling of Dynamic Sealing Behaviors of Spiral Groove Gas Face Seals,” Journal of Tribology, 124(1), pp 186–195. doi:https://doi.org/10.1115/1.1398291
   Web of Science ®Google Scholar
• Teo, C. J., and Spakovszky, Z. S. (2006), “Modeling and Experimental Investigation of Micro-Hydrostatic Gas Thrust Bearings for Micro-Turbomachines,” Journal of Turbomachinery, 128(4), pp 597–605. doi:https://doi.org/10.1115/1.2219760
   Web of Science ®Google Scholar
• Chen, W. (2012), “Numerical Analysis of Radial Groove Gas-Lubricated Face Seals at Slow Speed Condition,” Advanced Materials Research, Vol. 468, Trans Tech Publications Ltd, 2012.
   Google Scholar
• Freudenberg Sealing Technologies (2016), “Levitex® revolutioniert die Motordichtungen” (“Levitex® Revolutionizes Engine Seals”), https://levitex.fst.de/-/media/files/levitex,-d-,fst,-d-,com/fst_whitepaper_levitex_de.pdf (accessed October 28, 2020).
   Google Scholar
• KACO (2020), “EvoLift® Lift-Off for Minimal Friction,” https://www.kaco.de/fileadmin/kaco/pdf/EvoLift__-_Lift_Off_for_minimal_friction.pdf (accessed October 28, 2020).
   Google Scholar
• Lang, K., Bock, E., Neuberger, S., Baaser, H., and Haas, W. (2014), “Designed to Cost Gas Lubricated Face Seals for Energy Saving,” Proceedings of the 13th EDF/Pprime Workshop, October 2014, Poitiers, France.
   Google Scholar
• Neuberger, S., Bock, E., Lang, K., and Haas W. (2014), “Potential CO2-Savings Achieved by Using Gas-Lubricated Face Seals,” Proceedings of the 35. International Vienna Motor Symposium, 2014, VDI-Verlag, pp 248–272.
   Google Scholar
• Gölz, J., Bauer, F., and Haas, W. (2014), “Experimental Study on the Sealing Mechanism of Bidirectional PTFE Lip Seals,” Tribology Transactions, 57(5). doi:https://doi.org/10.1080/10402004.2014.918236
   Google Scholar
• Stoll, M., Dakov, N., Hörl, L., and Bauer, F. (2018), “A New Innovative Design for Shaft Seals,” Proceedings of the 24th International Conference on Fluid Sealing, March 2018, BHR Group, Manchester, UK.
   Google Scholar
• Stoll, M., Dakov, N., Hörl, L., and Bauer, F. (2018), “Functional Behaviour of Different Back-Structures for PTFE Shaft Seals,” Proceedings of the 20th International Sealing Conference, Stuttgart, Germany, October 2018, Fachverband Fluidtechnik im VDMA e.V.
   Google Scholar
• Stoll, M. (2019), “Entwicklung und Funktionsanalyse rückenstrukturierter Manschettendichtringe aus PTFE-Compound” (“Development and Functional Analysis of Back-Structured Shaft Seals (B3S) made of PTFE-Compound”), Doctoral Thesis, University of Stuttgart, Germany.
   Google Scholar
• Reynolds, O. (1886), “On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil,” Philosophical Transactions of the Royal Society of London, Royal Society, 177, pp 157–234.
   Google Scholar
• Vijayaraghavan, D., and Keith, T., Jr. (1989), “Development and Evaluation of a Cavitation Algorithm,” Tribology Transactions, 32, pp 225–233. doi:https://doi.org/10.1080/10402008908981882
   Web of Science ®Google Scholar
• Boussinesq, J. (1885), “Application des potentiels à l’étude de l’équilibre et du mouvement des solides élastiques” (“Application of Potentials to the Study of Equilibrium and Movement of Elastic Solids”), Gauthier-Villars, Imprimeur-Libraire (in French).
   Google Scholar
• Love, A. (1929), “The Stress Produced in a Semi-Infinite Solid by Pressure on Part of the Boundary,” Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, 228, pp 377–420.
   Google Scholar
• Liu, S., Wang, Q., and Liu, G. (2000), “A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses,” Wear, 243, pp 101–111. doi:https://doi.org/10.1016/S0043-1648(00)00427-0
   Web of Science ®Google Scholar
• Sainsot, P., and Lubrecht, A. (2011), “Efficient Solution of the Dry Contact of Rough Surfaces: A Comparison of Fast Fourier Transform and Multigrid Methods,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225, pp 441–448. doi:https://doi.org/10.1177/1350650111401535
   Web of Science ®Google Scholar
• Hamrock, B. J., and Dowson, D. (1976), “Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part I—Theoretical Formulation,” Journal of Lubrication Technology, 98, pp 223–228.
   Web of Science ®Google Scholar
• Stupkiewicz, S. (2009), “Finite Element Treatment of Soft Elastohydrodynamic Lubrication Problems in the Finite Deformation Regime,” Computational Mechanics, 44(5), pp 605–619. doi:https://doi.org/10.1007/s00466-009-0394-3
   Web of Science ®Google Scholar
• Prati, E., and Strozzi, A. (1984), “A Study of the Elastohydrodynamic Problem in Rectangular Elastomeric Seals,” Transactions of the ASME Journal of Tribology, 106, pp 505–512. doi:https://doi.org/10.1115/1.3260972
   Web of Science ®Google Scholar
• Salant, R., Maser, N., and Yang, B. (2007), “Numerical Model of a Reciprocating Hydraulic Rod Seal,” Transactions of the ASME Journal of Tribology, 129, pp 91–97. doi:https://doi.org/10.1115/1.2401222
   Web of Science ®Google Scholar
• Bauer, F., and Haas, W. (2007), “A New Approach to Analyze the Hydrodynamic Flow in Sealing Aids—PTFE-Lip Seals with Spiral Grooves,” Tribology Transactions, 50(3). doi:https://doi.org/10.1080/10402000701260955
   Google Scholar
• McCutchen, C. W. (1964), “Optical Systems for Observing Surface Topography by Frustrated Total Internal Reflction and by Interference,” Review of Scientific Instruments, 35, pp 1340–1345. doi:https://doi.org/10.1063/1.1718740
   Web of Science ®Google Scholar
• Han, J. Y. (2005), “Low-Cost Multi-Touch Sensing Through Frustrated Total Internal Reflection,” Proceedings of the 18th Annual ACM Symposium User Interface Software and Technology—UIST’05, pp 115–118.
   Google Scholar
• Bennett, A. I., et al. (2017), “Contact Measurements of Randomly Rough Surfaces,” Tribology Letters, 65(4). doi:https://doi.org/10.1007/s11249-017-0918-5
   Google Scholar