The Effect of Interface Modifications Combination of Multiple Friction Blocks on Truck Brake Squeal

References

• Kinkaid, N. M., O’Reilly, O. M., and Papadopoulos P. (2003), “Automotive Disc Brake Squeal,” Journal of Sound and Vibration, 267(1), pp 105–166. doi:10.1016/S0022-460X(02)01573-0
   Web of Science ®Google Scholar
• Akay, A. (2002), “Acoustics of Friction,” The Journal of the Acoustical Society of America, 111(4), pp 1525–1548. doi:10.1121/1.1456514
   PubMed Web of Science ®Google Scholar
• Hochlenert, D., Spelsberg-Korspeter, G., and Hagedorn, P. (2010), “A Note on Safety-Relevant Vibrations Induced by Brake Squeal,” Journal of Sound and Vibration, 329(19), pp 3867–3872. doi:10.1016/j.jsv.2010.04.033
   Web of Science ®Google Scholar
• Renaud, F., Chevallier, G. L., Dion, J. L., and Taudière, G. (2012), “Motion Capture of a Pad Measured with Accelerometers during Squeal Noise in a Real Brake System,” Mechanical Systems and Signal Processing, 33, pp 155–166. doi:10.1016/j.ymssp.2012.06.027
   Web of Science ®Google Scholar
• Massi, F., Berthier, Y., and Baillet, L. (2008), “Contact Surface Topography and System Dynamics of Brake Squeal,” Wear, 265, pp 1784–1792. doi:10.1016/j.wear.2008.04.049
   Web of Science ®Google Scholar
• Herve, B., Sinou, J. J., Mahe, H., and Jezequel, L. (2008), “Analysis of Squeal Noise and Mode Coupling Instabilities including Damping and Gyroscopic Effects,” European Journal of Mechanics A - Solids, 27(2), pp 141–160. doi:10.1016/j.euromechsol.2007.05.004
   Web of Science ®Google Scholar
• Liu, P., Zheng, H., Cai, C., Wang, Y. Y., Lu, C., Ang, K. H., and Liu, G. R. (2007), “Analysis of Disc Brake Squeal Using the Complex Eigenvalue Method,” Applied Acoustics, 68(6), pp 603–615. doi:10.1016/j.apacoust.2006.03.012
   Web of Science ®Google Scholar
• Wahlström, J. (2015), “A Comparison of Measured and Simulated Friction, Wear, and Particle Emission of Disc Brakes,” Tribology International, 92, pp 503–511. doi:10.1016/j.triboint.2015.07.036
   Web of Science ®Google Scholar
• Graf, M. and Ostermeyer, G. P. (2011), “Instabilities in the Sliding of Continua with Surface Inertias: An Initiation Mechanism for Brake Noise,” Journal of Sound and Vibration, 330, pp 5269–5279. doi:10.1016/j.jsv.2011.06.002
   Web of Science ®Google Scholar
• Kim, S. S., Hwang, H. J., Shin, M. W., and Jang, H. (2011), “Friction and Vibration of Automotive Brake Pads Containing Different Abrasive Particles,” Wear, 271, pp 1194–1202. doi:10.1016/j.wear.2011.05.037
   Web of Science ®Google Scholar
• Österle, W., Kloß, H., Urban, I., and Dmitriev, A. I. (2007), “Towards a Better Understanding of Brake Friction Materials,” Wear, 263, pp 1189–1201. doi:10.1016/j.wear.2006.12.020
   Web of Science ®Google Scholar
• Ouyang, H., Nack, W., Yuan, Y., and Chen, F. (2005), “Numerical Analysis of Automotive Disc Brake Squeal: A Review,” International Journal of Vehicle Noise and Vibration, 1, pp 207–230. doi:10.1504/IJVNV.2005.007524
   Google Scholar
• Lacerra, G., Di Bartolomeo, M., Milana, S., Baillet, L., Chatelet, E., and Massi, F. (2018), “Validation of a New Frictional Law for Simulating Friction-Induced Vibrations of Rough Surfaces,” Tribology International, 121, pp 468–480. doi:10.1016/j.triboint.2018.01.052
   Web of Science ®Google Scholar
• Le Bot, A. and Chakra, E. B. (2010), “Measurement of Friction Noise versus Contact Area of Rough Surfaces Weakly Loaded,” Tribology Letters, 37(2), pp 273–281. doi:10.1007/s11249-009-9521-8
   Web of Science ®Google Scholar
• Nouby, M. and Srinivasan, K. (2011), “Simulation of the Structural Modifications of a Disc Brake System to Reduce Brake Squeal,” Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 225(5), pp 653–672. doi:10.1177/2041299110394515
   Google Scholar
• Belhocine, A. and Ghazaly, N. M. (2015), “Effects of Material Properties on Generation of Brake Squeal Noise Using Finite Element Method,” Latin American Journal of Solids and Structures, 12, pp 1432–1447. doi:10.1590/1679-78251520
   Web of Science ®Google Scholar
• Tang, B., Mo, J. L., Wu, Y. K., Quan, X., Zhu, M. H., and Zhou, Z. R. (2019), “Effect of the Friction Block Shape of Railway Brakes on the Vibration and Noise under Dry and Wet Conditions,” Tribology Transactions, 62, pp 262–273. doi:10.1080/10402004.2018.1545954
   Web of Science ®Google Scholar
• Singla, N., Brunel, J. F., Mège-Revil, A., Kasem, H., and Desplanques, Y. (2020), “Experiment to Investigate the Relationship between the Third-Body Layer and the Occurrence of Squeals in Dry Sliding Contact,” Tribology Letters, 68(1), pp 1–11. doi:10.1007/s11249-019-1244-x
   Web of Science ®Google Scholar
• Karamoozian, A., Jiang, H., Tan, C. A., Wang, L., and Wang, Y. (2020), “An Integrated Approach for Instability Analysis of Lattice Brake System Using Contact Pressure Sensitivity,” IEEE Access, 8, pp 19948–19969. doi:10.1109/ACCESS.2020.2964337
   Web of Science ®Google Scholar
• Nam, J. H., Do, H. C., and Kang, J. Y. (2017), “Effect of Groove Surface on Friction Noise and Its Mechanism,” International Journal of Precision Engineering and Manufacturing, 18(8), pp 1165–1172. doi:10.1007/s12541-017-0136-y
   Web of Science ®Google Scholar
• Ibrahim, R. A. (1994), “Friction-Induced Vibration, Chatter, Squeal, and Chaos—Part I: Mechanics of Contact and Friction,” Applied Mechanics Reviews, 47, pp 209–226.
   Google Scholar
• Ibrahim, R. A. (1994), “Friction-Induced Vibration, Chatter, Squeal, and Chaos—Part II: Dynamics and Modeling,” Applied Mechanics Reviews, 47, pp 227–253. doi:10.1115/1.3111080
   Google Scholar
• Ghazaly, N. M., El-Sharkawy, M., and Ahmed, I. (2014), “A Review of Automotive Brake Squeal Mechanisms,” Journal of Mechanical Design and Vibration, 1(1), pp 5–9.
   Google Scholar
• Rusli, M. and Okuma, M. (2007), “Effect of Surface Topography on Mode-Coupling Model of Dry Contact Sliding Systems,” Journal of Sound and Vibration, 308, pp 721–734. doi:10.1016/j.jsv.2007.03.046
   Web of Science ®Google Scholar
• Hoffmann, N. and Gaul, L. (2004), “A Sufficient Criterion for the Onset of Sprag–Slip Oscillations,” Archive of Applied Mechanics, 73, pp 650–660. doi:10.1007/s00419-003-0315-4
   Web of Science ®Google Scholar
• Yoon, S., Shin, M., Lee, W., and Jang, H. (2012), “Effect of Surface Contact Conditions on the Stick–Slip Behavior of Brake Friction Material,” Wear, 294, pp 305–312. doi:10.1016/j.wear.2012.07.011
   Web of Science ®Google Scholar
• Kang, J., Krousgrill, C. M., and Sadeghi, F. (2009), “Analytical Formulation of Mode-Coupling Instability in Disc–Pad Coupled System,” International Journal of Mechanical Sciences, 51(1), pp 52–63. doi:10.1016/j.ijmecsci.2008.11.002
   Web of Science ®Google Scholar
• AbuBakar, A. R. and Ouyang, H. (2008), “A prediction methodology of disk brake squeal using complex eigenvalue analysis,” International Journal of Vehicle Design, 46(4), pp 416–435.
   Web of Science ®Google Scholar
• Chen, G., Lv, J., Zhu, Q., He, Y., and Xiao, X. (2019), “Effect of the Braking Pressure Variation on Disc Brake Squeal of a Railway Vehicle: Test Measurement and Finite Element Analysis,” Wear, 426, pp 1788–1796. doi:10.1016/j.wear.2018.12.051
   Web of Science ®Google Scholar
• Hou, J., Guo, X. X., and Tan, G. F. (2009), “Complex Mode Analysis on Disc Brake Squeal and Design Improvement,” .No. 2009-01-2101. SAE Technical Paper.
   Google Scholar
• Pan, G. and Chen, L. (2018), “Impact Analysis of Brake Pad Backplate Structure and Friction Lining Material on Disc-Brake Noise,” Advances in Materials Science and Engineering, 7, pp 1–9. doi:10.1155/2018/7093978
   Google Scholar
• Fieldhouse, J. D. (1999), “A Proposal to Predict the Noise Frequency of a Disc Brake Based on the Friction Pair Interface Geometry.” No. 1999-01-3403. Brake Colloquium & Engineering Display.
   Google Scholar
• Wang, X. C., Mo, J. L., Ouyang, H., Wang, D. W., Chen, G. X., Zhu, M. H., and Zhou, Z. R. (2016), “Squeal Noise of Friction Material with Groove-Textured Surface: An Experimental and Numerical Analysis,” Journal of Tribology, 138(2), pp 021401. doi:10.1115/1.4031399
   Web of Science ®Google Scholar
• Ghazaly, N. M. (2010), Study on Automotive Disc Brake Squeal Using Finite Element Analysis and Design of Experiments, Ph.D. Thesis, Mechanical Engineering Department, Anna University, India.
   Google Scholar
• Oberst, S. and Lai, J. (2011), “Statistical Analysis of Brake Squeal Noise,” Journal of Sound and Vibration, 330, pp 2978–2994. doi:10.1016/j.jsv.2010.12.021
   Web of Science ®Google Scholar
• Liu, E. C., Kung, S. W., Jenq, S. T., Gau, C., Tsai, H. L., Lee, C. C., and Chen, Y. D. (2008 ), “Effect of Chamfered Brake Pad Patterns on the Vibration Squeal Response of Disc Brake System,” 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, Tainan, Taiwan.
   Google Scholar
• Papinniemi, A., Lai, J. C., Zhao, J., and Loader, L. (2002), “Brake Squeal: A Literature Review,” Applied Acoustics, 63(4), pp 391–400. doi:10.1016/S0003-682X(01)00043-3
   Web of Science ®Google Scholar
• Abubakar, A. R. and Ouyang, H. (2006), “Complex Eigenvalue Analysis and Dynamic Transient Analysis in Predicting Disc Brake Squeal,” International Journal of Vehicle Noise and Vibration, 2, pp 143–155. doi:10.1504/IJVNV.2006.011051
   Google Scholar
• Nouby, M., Abdo, J., Mathivanan, D., and Srinivasan, K. (2011), “Evaluation of disc brake materials for squeal reduction,” Tribology Transactions, 54(4), pp 644–656.
   Google Scholar
• Renault, A., Massa, F., Lallemand, B., and Tison, T. (2016), “Experimental Investigations for Uncertainty Quantification in Brake Squeal Analysis,” Journal of Sound and Vibration, 367, pp 37–55. doi:10.1016/j.jsv.2015.12.049
   Web of Science ®Google Scholar
• Kim, C. and Zhou, K. (2016), “Analysis of Automotive Disc Brake Squeal Considering Damping and Design Modifications for Pads and a Disc,” International Journal of Automotive Technology, 17(2), pp 213–223. doi:10.1007/s12239-016-0021-1
   Web of Science ®Google Scholar
• Lü, H. and Yu, D. (2014), “Brake Squeal Reduction of Vehicle Disc Brake System with Interval Parameters by Uncertain Optimization,” Journal of Sound and Vibration, 333(26), pp 7313–7325. doi:10.1016/j.jsv.2014.08.027
   Web of Science ®Google Scholar
• Guan, D. H. and Jiang, D. Y. (1998), “A Study on Disc Brake Squeal Using Finite Element Methods,”. No. 980597. SAE Technical Paper.
   Google Scholar
• Wang, D. W., Mo, J. L., Liu, M. Q., Ouyang, H., and Zhou, Z. R. (2016), “Noise Performance Improvements and Tribological Consequences of a Pad-on-Disc System through Groove-Textured Disc Surface,” Tribology International, 102, pp 222–236. doi:10.1016/j.triboint.2016.05.030
   Web of Science ®Google Scholar
• Sujatha, C., Nouby, M., and Srinivasan, K. (2010), “Reduction of Automotive Brake Squeal through Pad Geometrical Modifications: A Numerical Study,” Frontiers in Automobile and Mechanical Engineering-2010, 2010, pp 393–398.
   Google Scholar