References
- Feng, K., Huang, Z., and Guo, Z.-Y. (2015), “Design of Spherical Spiral Groove Bearings for a High-Speed Air-Lubricated Gyroscope,” Tribology Transactions, 58(6), pp 1084–1095. doi:https://doi.org/10.1080/10402004.2015.1045650
- San Andres, L. (1994), “Dynamic Force Response of Spherical Hydrostatic Journal Bearings for Cryogenic Applications,” Tribology Transactions, 37(3), pp 463–470. doi:https://doi.org/10.1080/10402009408983318
- Sautter, S. (1987), “Spherical Plain Bearings in Segment Gates—An Economic Solution,” Ball Bearing Journal, pp 11–17.
- Dowson, D., and Taylor, C. M. (1967), “Fluid-Inertia Effects in Spherical Hydrostatic Thrust Bearings,” ASLE Transactions, 10(3), pp 316–324. doi:https://doi.org/10.1080/05698196708972189
- Ragab, H. (1974), “Performance of Spherical Thrust Bearings,” Wear, 29(1), pp 11–20. doi:https://doi.org/10.1016/0043-1648(74)90129-X
- Salem, E., and Khalil, F. (1978), “Variable-Viscosity Effects in Externally Pressurized Spherical Oil Bearings,” Wear, 50(2), pp 221–235. doi:https://doi.org/10.1016/0043-1648(78)90070-4
- Salem, E. A., Khalil, M. F., and Bedewi, M. A. (1983), “Analysis of Externally Pressurized Spherical Bearings Lubricated With Non-Newtonian Fluids,” Wear, 91(1), pp 1–14. doi:https://doi.org/10.1016/0043-1648(83)90103-5
- Salem, E. A., Khalil, M. F., and Bedewi, M. A. (1983), “Thermal and Inertia Effects in Externally Pressurized Spherical Bearings Lubricated With Non-Newtonian Fluids,” Wear, 91(1), pp 15–23. doi:https://doi.org/10.1016/0043-1648(83)90104-7
- Meyer, D. (2002), “Reynolds Equation for Spherical Bearings,” Journal of Tribology, 125(1), pp 203–206. doi:https://doi.org/10.1115/1.1506319
- Walicka, A., and Jurczak, P. (2017), “Influence of Total Inertia Effects in a Thrust Curvilinear Bearing Lubricated With Newtonian Lubricants,” International Journal of Applied Mechanics and Engineering, 22(4). doi:https://doi.org/10.1515/ijame-2017-0067
- Walicka, A., Jurczak, P., and Falicki, J. (2017), “Curvilinear Squeeze Film Bearing Lubricated With a DeHaven Fluid or With Similar Fluids,” International Journal of Applied Mechanics and Engineering, 22(3). doi:https://doi.org/10.1515/ijame-2017-0044
- Mehenny, D., and Taylor, C. (2000), “Influence of Circumferential Waviness on Engine Bearing Performance,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214(1), pp 51–61. doi:https://doi.org/10.1243/0954406001522804
- Tønder, K., and Christensen, H. (1972), “Waviness and Roughness in Hydrodynamic Lubrication,” Proceedings of the Institution of Mechanical Engineers, 186(1), pp 807–812. doi:https://doi.org/10.1243/PIME_PROC_1972_186_096_02
- Christensen, H. (1969), “Stochastic Models for Hydrodynamic Lubrication of Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers, 184(1), pp 1013–1026. doi:https://doi.org/10.1243/PIME_PROC_1969_184_074_02
- Christensen, H., and Tonder, K. (1971), “The Hydrodynamic Lubrication of Rough Bearing Surfaces of Finite Width.”
- Lin, J. (2002), “Effects of Surface Roughness and Rotational Inertia on the Optimal Stiffness of Hydrostatic Thrust Bearings,” International Journal of Applied Mechanics and Engineering, 7(4), pp 1247–1261.
- Lin, T.-R. (1996), “Hydrodynamic Lubrication of Journal Bearings Including Micropolar Lubricants and Three-Dimensional Irregularities,” Wear, 192(1), pp 21–28. doi:https://doi.org/10.1016/0043-1648(95)06740-X
- Tsann-Rong, L. (1994), “Steady State Performance of Finite Hydrodynamic Journal Bearing With Three-Dimensional Irregularities,” Wear, 176(1), pp 95–102. doi:https://doi.org/10.1016/0043-1648(94)90202-X
- Guha, S. K. (1993), “Analysis of Dynamic Characteristics of Hydrodynamic Journal Bearings With Isotropic Roughness Effects,” Wear, 167(2), pp 173–179. doi:https://doi.org/10.1016/0043-1648(93)90322-D
- Guha, S. K. (2000), “Analysis of Steady-State Characteristics of Misaligned Hydrodynamic Journal Bearings With Isotropic Roughness Effect,” Tribology International, 33(1), pp 1–12. doi:https://doi.org/10.1016/S0301-679X(00)00005-0
- Gupta, J. L., and Deheri, G. M. (1996), “Effect of Roughness on the Behavior of Squeeze Film in a Spherical Bearing,” Tribology Transactions, 39(1), pp 99–102. doi:https://doi.org/10.1080/10402009608983508
- Yacout, A. W., Ismaeel, A. S., and Kassab, S. Z. (2006), “The Surface Roughness Effect on the Hydrostatic Thrust Spherical Bearings Performance: Part 2—Clearance Type of Bearings,” Proc. ASME 2006 International Mechanical Engineering Congress and Exposition. doi:https://doi.org/10.1115/IMECE2006-13004
- Yacout, A. W., Ismaeel, A. S., and Kassab, S. Z. (2007), “The Combined Effects of the Centripetal Inertia and the Surface Roughness on the Hydrostatic Thrust Spherical Bearings Performance,” Tribology International, 40(3), pp 522–532. doi:https://doi.org/10.1016/j.triboint.2006.05.007
- Jurczak, P., and Falicki, J. (2016), “Pressure Distribution in a Squeeze Film Spherical Bearing With Rough Surfaces Lubricated by an Ellis Fluid,” International Journal of Applied Mechanics and Engineering, 21(3). doi:https://doi.org/10.1515/ijame-2016-0036
- Yacout, A. W. (2007), “The Surface Roughness Effect on the Hydrostatic Thrust Spherical Bearings Performance: Part 3 of 5—Recessed Clearance Type of Bearings,” Proc. ASME 2007 International Mechanical Engineering Congress and Exposition. doi:https://doi.org/10.1115/IMECE2007-41013
- Mokhtar, M., Aly, W., and Shawki, G. (1984), “Experimental Study of Journal Bearings With Undulating Journal Surface,” Tribology International, 17(1), pp 19–23. doi:https://doi.org/10.1016/0301-679X(84)90078-1
- Ene, N. M., Dimofte, F., and Keith, T. G., Jr. (2008), “A Stability Analysis for a Hydrodynamic Three-Wave Journal Bearing,” Tribology International, 41(5), pp 434–442. doi:https://doi.org/10.1016/j.triboint.2007.10.002
- Ene, N. M., Dimofte, F., and Oswald, F. B. (2008), “Effect of the Wave Amplitude on the Dynamic Behavior of a Wave Journal Bearing,” Proc. International Joint Tribology Conference, ISBN 079184336X. doi:https://doi.org/10.1115/IJTC2008-71290
- Sahu, K., and Sharma, S. C. (2018), “A Study on Performance of Slot Entry Hybrid Journal Bearing Considering Effect of Surface Irregularities,” Industrial Lubrication and Tribology, 70(6), pp 1094–1109. doi:https://doi.org/10.1108/ILT-09-2017-0264
- Rabinow, J. (1948), “The Magnetic Fluid Clutch,” Transactions of the American Institute of Electrical Engineers, 67(2), pp 1308–1315. doi:https://doi.org/10.1109/T-AIEE.1948.5059821
- Thakur, M. K., and Sarkar, C. (2020), “Investigation of Different Groove Profile Effects on Torque Transmission in Shear Mode Magnetorheological Clutch: Numerical Simulation and Experimental Study,” Journal of Tribology, 143(9). doi:https://doi.org/10.1115/1.4049255
- Lijesh, K. P., Kumar, D., and Hirani, H. (2017), “Synthesis and Field Dependent Shear Stress Evaluation of Stable MR fluid for Brake Application,” Industrial Lubrication and Tribology, 69(5), pp 655–665. doi:https://doi.org/10.1108/ILT-03-2016-0061
- Bompos, D. A., and Nikolakopoulos, P. G. (2014), “Journal Bearing Stiffness and Damping Coefficients Using Nanomagnetorheological Fluids and Stability Analysis,” Journal of Tribology, 136(4). doi:https://doi.org/10.1115/1.4027748
- Zapoměl, J., Ferfecki, P., and Forte, P. (2012), “A Computational Investigation of the transient Response of an Unbalanced Rigid Rotor Flexibly Supported and Damped by Short Magnetorheological Squeeze Film Dampers,” Smart Materials and Structures, 21(10), pp 105011. doi:https://doi.org/10.1088/0964-1726/21/10/105011
- Carlson, J. D. (2003), “Critical Factors for MR Fluids in Vehicle Systems,” International Journal of Vehicle Design, 33(1–3), pp 207–217. doi:https://doi.org/10.1504/IJVD.2003.003572
- Hesselbach, J., and Abel-Keilhack, C. (2003), “Active Hydrostatic Bearing With Magnetorheological Fluid,” Journal of Applied Physics, 93(10), pp 8441–8443. doi:https://doi.org/10.1063/1.1555850
- Kulkarni, P., Ciocanel, C., Vieira, S. L., and Naganathan, N. (2003), “Study of the Behavior of MR Fluids in Squeeze, Torsional and Valve Modes,” Journal of Intelligent Material Systems and Structures, 14(2), pp 99–104. doi:https://doi.org/10.1177/1045389X03014002005
- Urreta, H., Leicht, Z., Sanchez, A., Agirre, A., Kuzhir, P., and Magnac, G. (2009), “Hydrodynamic Bearing Lubricated with Magnetic Fluids,” Journal of Intelligent Material Systems and Structures, 21(15), pp 1491–1499. doi:https://doi.org/10.1177/1045389X09356007
- Laukiavich, C. A., Braun, M. J., and Chandy, A. J. (2014), “A Comparison Between the Performance of Ferro- and Magnetorheological Fluids in a Hydrodynamic Bearing,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 228(6), pp 649–666. doi:https://doi.org/10.1177/1350650114523753
- Wang, X., Li, H., Li, M., Bai, H., Meng, G., and Zhang, H. (2015), “Dynamic Characteristics of Magnetorheological Fluid Lubricated Journal Bearing and Its Application to Rotor Vibration Control,” Journal of Vibroengineering, 17(4), pp 1912–1928.
- Vaz, N., Binu, K., Serrao, P., Hemanth, M., Jacob, J., Roy, N., and Dias, E. (2017), “Experimental Investigation of Frictional Force in a Hydrodynamic Journal Bearing Lubricated With Magnetorheological Fluid,” Journal of Mechanical Engineering and Automation, 7(5), pp 131–134.
- Lampaert, S. G. E., and van Ostayen, R. A. J. (2019), “Experimental Results on a Hydrostatic Bearing Lubricated With a Magnetorheological Fluid,” Current Applied Physics, 19(12), pp 1441–1448. doi:https://doi.org/10.1016/j.cap.2019.09.004
- Sharma, S. C., and Kumar, A. (2021), “On the Behaviour of Roughened Conical Hybrid Journal Bearing System Operating With MR Lubricant,” Tribology International, 156, pp 106824. doi:https://doi.org/10.1016/j.triboint.2020.106824
- Murti, P. R. K. (1975), “Squeeze Film Behavior in a Spherical Porous Bearing,” Journal of Lubrication Technology, 97(4), pp 638–641. doi:https://doi.org/10.1115/1.3452694
- Goenka, P. K., and Booker, J. F. (1980), “Spherical Bearings: Static and Dynamic Analysis Via the Finite Element Method,” Journal of Lubrication Technology, 102(3), pp 308–318. doi:https://doi.org/10.1115/1.3251522
- Yadav, S. K., and Sharma, S. C. (2014), “Performance of Hydrostatic Tilted Thrust Pad Bearings of Various Recess Shapes Operating With Non-Newtonian Lubricant,” Finite Elements in Analysis and Design, 87, pp 43–55. doi:https://doi.org/10.1016/j.finel.2014.04.009
- Yadav, S. K., and Sharma, S. C. (2015), “Finite Element Analysis of Tilted Thrust Pad Bearings of Various Recesses Shapes Considering Thrust Pad Flexibility,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230(7), pp 872–893. doi:https://doi.org/10.1177/1350650115619610
- Zienkiewicz, O. C., Taylor, R. L., and Zhu, J. Z. (2005), The Finite Element Method: Its Basis and Fundamentals. Elsevier, ISBN 008047277X.
- Hinton, E., and Owen, D. R. J. (2017), Finite Elements in Plasticity: Theory and Practice. Pineridge Press Limited.
- Khonsari, M. M., and Booser, E. R. (2017), Applied Tribology: Bearing Design and Lubrication. John Wiley & Sons, ISBN 1118637240.
- Sinhasan, R., Jain, S., and Sharma, S. (1988), “A Comparative Study of Flexible Thrust Pad Hydrostatic Bearings With Different Restrictors,” Wear, 121(1), pp 53–70. doi:https://doi.org/10.1016/0043-1648(88)90031-2
- DATA, L. T., “MRF-122EG Magneto-Rheological Fluid,” https://lordfulfillment.com/pdf/44/DS7027_MRF-122EGMRFluid.pdf.
- Carlson, J. D. (2005), “MR Fluids and Devices in the Real World,” International Journal of Modern Physics B, 19(07–09), pp 1463–1470. doi:https://doi.org/10.1142/S0217979205030451
- Costa, E., and Branco, P. J. C. (2009), “Continuum Electromechanics of a Magnetorheological Damper Including the Friction Force Effects Between the MR Fluid and Device Walls: Analytical Modelling and Experimental Validation,” Sensors and Actuators A: Physical, 155(1), pp 82–88. doi:https://doi.org/10.1016/j.sna.2009.08.004
- Leicht, Z., Urreta, H., Sanchez, A., Agirre, A., Kuzhir, P., and Magnac, G. (2009), “Theoretical and Experimental Analysis of MR Valve,” Proc. Journal of Physics: Conference Series. IOP Publishing, ISBN 1742–6596.
- Choi, Y., Cho, J., Choi, S., and Wereley, N. (2005), “Constitutive Models of Electrorheological and Magnetorheological Fluids Using Viscometers,” Smart Materials and Structures, 14(5), pp 1025. doi:https://doi.org/10.1088/0964-1726/14/5/041
- Gottschalk, P. G., and Dunn, J. R. (2005), “The Five-Parameter Logistic: A Characterization and Comparison With the Four-Parameter Logistic,” Analytical Biochemistry, 343(1), pp 54–65. doi:https://doi.org/10.1016/j.ab.2005.04.035
- Dorier, C., and Tichy, J. (1992), “Behavior of a Bingham-Like Viscous Fluid in Lubrication Flows,” Journal of Non-Newtonian Fluid Mechanics, 45(3), pp 291–310. doi:https://doi.org/10.1016/0377-0257(92)80065-6
- Sinhasan, R., and Sah, P. (1996), “Static and Dynamic Performance Characteristics of an Orifice Compensated Hydrostatic Journal Bearing With Non-Newtonian Lubricants,” Tribology International, 29(6), pp 515–526. doi:https://doi.org/10.1016/0301-679X(95)00115-K
- Agrawal, N., and Sharma, S. C. (2021), “Effect of the ER Lubricant Behaviour on the Performance of Spherical Recessed Hydrostatic Thrust Bearing,” Tribology International, 153, pp 106621. doi:https://doi.org/10.1016/j.triboint.2020.106621
- Sinhasan, R., Jain, S. C., and Sharma, S. C. (1988), “A Comparative Study of Flexible Thrust Pad Hydrostatic Bearings With Different Restrictors,” Wear, 121(1), pp 53–70. doi:https://doi.org/10.1016/0043-1648(88)90031-2
- Sinhasan, R., Jain, S. C., and Sharma, S. C. (1983), “Elastohydrostatic Lubrication of Capillary Compensated Circular Pad Thrust Bearings,” Wear, 91(2), pp 131–147. doi:https://doi.org/10.1016/0043-1648(83)90249-1
- Bompos, D. A., and Nikolakopoulos, P. G. (2016), “Rotordynamic Analysis of a Shaft Using Magnetorheological and Nanomagnetorheological Fluid Journal Bearings,” Tribology Transactions, 59(1), pp 108–118. doi:https://doi.org/10.1080/10402004.2015.1050137
- Bompos, D. A., and Nikolakopoulos, P. G. (2016), “Experimental and Analytical Investigations of Dynamic Characteristics of Magnetorheological and Nanomagnetorheological Fluid Film Journal Bearing,” Journal of Vibration and Acoustics, 138(3). doi:https://doi.org/10.1115/1.4032900
- Wang, X., Li, H., and Meng, G. (2017), “Rotordynamic Coefficients of a Controllable Magnetorheological Fluid Lubricated Floating Ring Bearing,” Tribology International, 114, pp 1–14. doi:https://doi.org/10.1016/j.triboint.2017.04.002
- Ashtiani, M., Hashemabadi, S. H., and Ghaffari, A. (2015), “A Review on the Magnetorheological Fluid Preparation and Stabilization,” Journal of Magnetism and Magnetic Materials, 374, pp 716–730. doi:https://doi.org/10.1016/j.jmmm.2014.09.020
- Singh, A., and Sharma, S. C. (2020), “Influence of Geometric Imperfection of Journal on the Performance of Porous Hybrid Journal Bearing Under Turbulent Condition,” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(9), pp 1879–1896. doi:https://doi.org/10.1177/1350650120976427