References
- Jiang, G., He, H., Yan, J., and Xie, P. (2019), “Multiscale Convolutional Neural Networks for Fault Diagnosis of Wind Turbine Gearbox,” IEEE Transactions on Industrial Electronics, 66(4), pp 3196–3207. doi:https://doi.org/10.1109/TIE.2018.2844805
- Greco, A., Sheng, S., Keller, J., and Erdemir, A. (2013), “Material Wear and Fatigue in Wind Turbine Systems,” Wear, 302(2), pp 1583–1591. doi:https://doi.org/10.1016/j.wear.2013.01.060
- Teng, W., Ding, X., Tang, S., Xu, J., Shi, B., and Liu, Y. (2021), “Vibration Analysis for Fault Detection of Wind Turbine Drivetrains—A Comprehensive Investigation,” Sensors, 21(5), pp 1686. doi:https://doi.org/10.3390/s21051686
- Zhai, W., Bai, L., Zhou, R., Fan, X., Kang, G., Liu, Y., and Zhou, K. (2021), “Recent Progress on Wear-Resistant Materials: Designs, Properties, and Applications,” Advanced Science, pp 2003739. doi:https://doi.org/10.1002/advs.202003739
- Xue, Y., Shi, X., Zhou, H., Yang, Z., Zhang, J., Wu, C., and Xue, B. (2021), “Effects of Textured Surface Combined With Sn-Ag-Cu Coating on Tribological Properties and Friction-Induced Noise of Ti-6Al-4V Alloy,” Tribology Transactions, 64(3), pp 562–577. doi:https://doi.org/10.1080/10402004.2021.1881196
- Huang, Q., Shi, X., Xue, Y., Zhang, K., and Wu, C. (2021), “Optimization of Bionic Textured Parameter to Improve the Tribological Performance of AISI 4140 Self-Lubricating Composite Through Response Surface Methodology,” Tribology International, 161, pp 107104. doi:https://doi.org/10.1016/j.triboint.2021.107104
- Popov, V., Voll, L., Kusche, S., Li, Q., and Rozhkova, S. (2016), “Generalized Master Curve Procedure for Elastomer Friction Taking Into Account Dependencies on Velocity, Temperature and Normal Force,” Tribology International, 120(1), pp 376–380. doi:https://doi.org/10.1016/j.triboint.2017.12.047
- Nakano, K., and Popov, V. (2020), “Dynamic Stiction Without Static Friction: The Role of Friction Vector Rotation,” Physical Review E, 102(6-1), pp 063001. doi:https://doi.org/10.1103/PhysRevE.102.063001
- Hu, H., Guo, Y., Yan, J., Qiu, J., and Wang, Y. (2019), “Dry Sliding Wear Behavior of MoSi2-Mo5Si3-Mo5SiB2 Composite at Different Temperatures and Loads,” Wear, 428–429, pp 237–245. doi:https://doi.org/10.1016/j.wear.2019.03.018
- Baskara, S., Srirama, G., and Arumugam, S. (2016), “The Use of D-Optimal Design for Modeling and Analysing the Tribological Characteristics of Journal Bearing Materials Lubricated by Nano Based Biolubricants,” Tribology Transactions, 59(1), pp 44–54. doi:https://doi.org/10.1080/10402004.2015.1063179
- Wang, B., Liu, B., Zhang, X., and Gu, J. (2018), “Enhancing Heavy Load Wear Resistance of AISI 4140 Steel Through The Formation of a Severely Deformed Compound-Free Nitrided Surface Layer,” Surface and Coatings Technology, 356, pp 89–95. doi:https://doi.org/10.1016/j.surfcoat.2018.09.066
- Aguilera-Camacho, L., Hernández-Sierra, M., García-Miranda, J., and Moreno, K. (2021), “On the Influence of Tribological Properties of AISI 4140 Annealed Steel against Ceramic Counterparts under Dry and Lubricated Conditions and Their Effect on Steel Microstructure,” Metals, 11, pp 1275. doi:https://doi.org/10.3390/met11081275
- Morón, R., Arellano-Ortiz, G., Rodrı́guez-Castro, G., Meneses-Amador, A., Cruz-Ramı́rez, A., Méndez-Méndez, J., and Campos-Silva, I. (2020), “Wear Performance Under Dry and Lubricated Conditions of Post Boriding Heat Treatment in 4140 Steel,” Journal of Tribology, 143(2), pp 1–26. doi:https://doi.org/10.1115/1.4047789
- Singh, H., Singh, A., Singla, Y., Chattopadhyay, K., and Malhotra, R. (2020), “Optimization of Tribological Behavior of AISI 4140 Under Nano Fly Ash Particulates in Engine Lubricating Oil,” Materials Today: Proceedings, 45, pp 4619–4623.
- Liu, X., Dong, H., Lu, Z., Zhang, J., and Liu, B. (2021), “The Influence Mechanism of MoS2 and NiTi Microparticles on the Friction and Wear Properties of Bearing Steel,” Tribology International, 160, pp 107033. doi:https://doi.org/10.1016/j.triboint.2021.107033
- Zhang, Y., Chen, G., and Wang, L. (2020), “A Calculation Method for the Journal Bearing with a Determined Load Based on Response Surface Optimization,” Tribology Transactions, 63(4), pp 647–657. doi:https://doi.org/10.1080/10402004.2020.1731037
- Ananthakumar, K., Rajamani, D., Balasubramanian, E., and Davim, J. (2019), “Measurement and Optimization of Multi-Response Characteristics in Plasma Arc Cutting of Monel 400™ Using RSM and TOPSIS,” Measurement, 135, pp 725–737. doi:https://doi.org/10.1016/j.measurement.2018.12.010
- Alagarsamy, S., and Ravichandran, M. (2020), “Parametric Studies on Dry Sliding Wear Behaviour of Al-7075 Alloy Matrix Composite Using S/N Ratio and ANOVA Analysis,” Materials Research Express, 7(1), pp 016557. doi:https://doi.org/10.1088/2053-1591/ab654a
- Xia, R., Li, B., Wang, X., Yang, Z., and Liu, L. (2019), “Screening the Main Factors Affecting the Wear of the Scraper Conveyor Chute Using the Plackett-Burman Method,” Mathematical Problems in Engineering, 2019(1–2), pp 1–11. doi:https://doi.org/10.1155/2019/1204091
- Hingawe, N., and Bhore, S. (2019), “Multi-Objective Optimization of the Design Parameters of Texture Bottom Profiles in a Parallel Slider,” Friction, 8(4), pp 726–745. doi:https://doi.org/10.1007/s40544-017-0299-x
- García-León, R., Martínez-Trinidad, J., Zepeda-Bautista, R., Campos-Silva, I., Guevara-Morales, A., Martínez-Londoño, J., and Barbosa-Saldaña, J. (2021), “Dry Sliding Wear Test on Borided AISI 316L Stainless Steel Under Ball-on-Flat Configuration: A Statistical Analysis,” Tribology International, 157, pp 106885. doi:https://doi.org/10.1016/j.triboint.2021.106885
- Sail, K., Aouici, H., Hassani, S., Fnides, B., Belaadi, A., Naitbouda, A., and Abdi, S. (2017), “Influence of Tribological Parameters on S335 Steel Filing Ti-W-N in Dry Sliding Wear: Prediction Model and Sliding Condition Optimization,” International Journal of Advanced Manufacturing Technology, 92(9–12), pp 4057–4071. doi:https://doi.org/10.1007/s00170-017-0433-8
- Huang, Q., Shi, X., Xue, Y., Zhang, K., Gao, Y., and Wu, C. (2022), “Synergetic Effects of Biomimetic Microtexture With Multi-Solid Lubricants to Improve Tribological Properties of AISI 4140 Steel,” Tribology International, 167, pp 107395. doi:https://doi.org/10.1016/j.triboint.2021.107395
- Huang, Q., Wu, C., Shi, X., Xue, Y., and Zhang, K. (2022), “Synergistic Lubrication Mechanisms of AISI 4140 Steel in Dual Lubrication Systems of Multi-Solid Coating and Oil Lubrication,” Tribology International, 169, pp 107484. doi:https://doi.org/10.1016/j.triboint.2022.107484
- Ulutan, M, Yildirim, M. M., Celik, O. N., and Buytoz, S. (2010), “Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method,” Tribology Letters, 38(3), pp 231–239. doi:https://doi.org/10.1007/s11249-010-9597-1
- Singh, D., Litoria, A., Joshi, M., Dixit, G., and Hosmani, S. (2018), “Wear Behaviour of Boronized and Duplex-Treated AISI 4140 Steel Against DLC-Coated Boronized AISI 4140 Disc,” Surface Engineering, 2018. 35(4), pp 370–377.
- Sivasankaran, S., Ramkumar, K., Al-Mufadi, F., and Irfan, O. (2019), “Effect of TiB2/Gr Hybrid Reinforcements in Al 7075 Matrix on Sliding Wear Behavior Analyzed by Response Surface Methodology,” Metals and Materials International, 27(6), pp 1739–1755. doi:https://doi.org/10.1007/s12540-019-00543-5
- Cheng, X., Cheng, Y., Zhang, N., Zhao, S., Cui, H., and Zhou, H. (2020), “Purification of Flavonoids From Carex meyeriana Kunth based on AHP and RSM: Composition Analysis, Antioxidant, and Antimicrobial Activity,” Industrial Crops and Products, 157, pp 112900. doi:https://doi.org/10.1016/j.indcrop.2020.112900
- Biglarijoo N, Mirbagheri S, Bagheri M, Ehteshami M. Assessment of effective parameters in landfill leachate treatment and optimization of the process using neural network, genetic algorithm and response surface methodology(J). Process Safety and Environmental Protection, 2017, 106, pp 89–103. doi:https://doi.org/10.1016/j.psep.2016.12.006
- Singh, T., Patnaik, A., Chauhan, R., and Chauhan, P. (2018), “Selection of Brake Friction Materials Using Hybrid Analytical Hierarchy Process and Vise Kriterijumska Optimizacija Kompromisno Resenje Approach,” Polymer Composites, 39(5), pp 1655–1662. doi:https://doi.org/10.1002/pc.24113
- Koukoura, S., Carroll, J., Mcdonald, A., and Weiss, S. (2020), “Comparison of Wind Turbine Gearbox Vibration Analysis Algorithms Based on Feature Extraction and Classification,” IET Renewable Power Generation, 13(14), pp 2549–2557. doi:https://doi.org/10.1049/iet-rpg.2018.5313
- Calle, K., Ferreiro, S., Roldán-Paraponiaris, C., and Ulazia, A. (2019), “A Context-Aware Oil Debris-Based Health Indicator for Wind Turbine Gearbox Condition Monitoring,” Energies, 12, pp 3373. doi:https://doi.org/10.3390/en12173373