References
- Dong, C. L., Yuan, C. Q., Bai, X. Q., Yan, X. P., and Peng, Z. (2015), “Tribological Properties of Aged Nitrile Butadiene Rubber under Dry Sliding Conditions,” Wear, 322, pp 226–237. doi:https://doi.org/10.1016/j.wear.2014.11.010
- Zhao, Q., Li, X., and Gao, J. (2009), “Aging Behavior and Mechanism of Ethylene–Propylene-Diene Monomer (EPDM) Rubber in Fluorescent UV/Condensation Weathering Environment,” Polym. Degrad. Stabil., 94(3), pp 339–343. doi:https://doi.org/10.1016/j.polymdegradstab.2008.12.007
- Li, Y., Wang, Q., Wang, T., and Pan, G. (2012), “Preparation and Tribological Properties of Graphene Oxide/Nitrile Rubber Nanocomposites,” J. Mater. Sci., 47(2), pp 730–738. doi:https://doi.org/10.1007/s10853-011-5846-4
- Degrange, J. M., Thomine, M., Kapsa, P., Pelletier, J. M., Chazeau, L., Dudragne, G. and Guerbe, L. (2005), “Influence of Viscoelasticity on the Tribological Behaviour of Carbon Black Filled Nitrile Rubber (NBR) for Lip Seal Application,” Wear, 259(1), pp 684–692. doi:https://doi.org/10.1016/j.wear.2005.02.110
- Hill, D., Killeen, M., O'Donnell, J., Pomery, P., St John, D., and Whittaker, A. (1997), “Laboratory Wear Testing of Polyurethane Elastomers,” Wear, 208(1–2), pp 155–160. doi:https://doi.org/10.1016/S0043-1648(96)07514-X
- Zwa, B., Zga, B., and Cya, B. (2019), “Influence of Polyethylene Wax on Wear Resistance for Polyurethane Composite Material under Low Speed Water-Lubricated Conditions,” Wear, 426–427, pp 1008–1017.
- Wang, Q., Zheng, F., and Wang, T. (2016), “Tribological Properties of Polymers Pi, PTFE and PEEK at Cryogenic Temperature in Vacuum,” Cryogenics, 75, pp 19–25. doi:https://doi.org/10.1016/j.cryogenics.2016.01.001
- Cazan, C., Cosnita, M., and Isac, L. (2019), “The Influence of Temperature on the Performance of Rubber-PET-HDPE Waste-Based Composites with Different Inorganic Fillers,” J. Clean. Prod., 208, pp 1030–1040. doi:https://doi.org/10.1016/j.jclepro.2018.10.045
- Tzounis, L., Debnath, S., Rooj, S., Fischer, D., Mäder, E., Das, A., Stamm, M., and Heinrich, G. (2014), “High Performance Natural Rubber Composites with a Hierarchical Reinforcement Structure of Carbon Nanotube Modified Natural Fibers,” Mater. Design, 58, pp 1–11. doi:https://doi.org/10.1016/j.matdes.2014.01.071
- Mascia, L., Su, R., Clarke, J., Lou, Y., and Mele, E. (2017), “Fibres from Blends of Epoxidized Natural Rubber and Polylactic Acid by the Electrospinning Process: Compatibilization and Surface Texture,” Eur. Polym. J., 87, pp 241–254. doi:https://doi.org/10.1016/j.eurpolymj.2016.12.033
- Pei, Y. T., Bui, X. L., Zhou, X. B. and Hosson, J. T. M. D. (2008), “Tribological Behavior of W-DLC Coated Rubber Seals,” Surf. Coat. Tech., 202(9), pp 1869–1875. doi:https://doi.org/10.1016/j.surfcoat.2007.08.013
- Mofidi, M., Kassfeldt, E., and Prakash, B. (2008), “Tribological Behaviour of an Elastomer Aged in Different Oils,” Tribo. Int., 41(9), pp 860–866.
- Wu, J., Chen, L., Wang, Y., Su, B., Cui, Z., and Wang, D. (2019), “Effect of Temperature on Wear Performance of Aircraft Tire Tread Rubber,” Polym. Test., 79, pp 106037. doi:https://doi.org/10.1016/j.polymertesting.2019.106037
- Chen, G., Lee, J. H., Narravula, V., and Kitchin, T. (2012), “Friction and Noise of Rubber Belt in Low Temperature Condition: The Influence of Interfacial Ice Film,” Cold Reg. Sci. Technol., 71, pp 0–101.
- Li, Y., Zuo, S., Lei, L., Yang, X., and Wu, X. (2012), “Analysis of Impact Factors of Tire Wear,” J. Vib. Control, 18(6), pp 833–840. doi:https://doi.org/10.1177/1077546311411756
- Shen, M. X., Qin, T., Li, S. X., Peng, J. F., Xiong, G. Y., and Zhu, M. H. (2021), “High Speed Wheel-Rail Interfacial Adhesion and Surface Damage Behavior of Wheel in Wide Temperature Range,” J. Traffic Trans. Eng., 21(03), pp 269–278.
- Mofidi, M., and Prakash, B. (2013), “Two Body Abrasive Wear and Frictional Characteristics of Sealing Elastomers under Unidirectional Lubricated Sliding Conditions,” Tribol.-Mater. Surf. In., 4(1), pp 26–37.
- Zhang, S. (1992), “Wet Abrasion of Polymers,” Wear, 158(1–2), pp 1–13. doi:https://doi.org/10.1016/0043-1648(92)90026-5
- You, C. J., Jia, D. M., and Zeng, X. R. (2011), Rubber Industry Handbook: Testing and Inspection, Chemical Industry Press.
- Ying, W. B., Yuan, X. H., Song, W., and Cheng, X. N. (2006), “Wear Property of PTFE Composites Reinforced by Glass Fibers and Graphite,” Plastics, 35, pp 44–49.
- Persson, B. N. J., and Tosatti, E. (2000), “Qualitative Theory of Rubber Friction and Wear,” J. Chem. Phys., 112, pp 2021–2029. doi:https://doi.org/10.1063/1.480762
- Adams, M. J., Allan, A., Briscoe, B. J., Doyle, P. J., and Johnson, S. A. (2001), “An Experimental Study of the Nano-Scratch Behaviour of Poly(Methyl Methacrylate),” Wear, 251(1), pp 1579–1583. doi:https://doi.org/10.1016/S0043-1648(01)00798-0
- Mohammed, H., Briscoe, B. J., and Pitt, K. G. (2006), “The Intrinsic Nature and the Coherence of Compacted Pure Pharmaceutical Tablets,” Powder Technol., 165(1), pp 11–21.
- Schallamach, A. (1971), “How Does Rubber Slide?,” Wear, 17(4), pp 301–312. doi:https://doi.org/10.1016/0043-1648(71)90033-0
- Beck, R., and Truss, R. (1998), “Effect of Chemical Structure on the Wear Behaviour of Polyurethane-Urea Elastomers,” Wear, 218(2), pp 145–152. doi:https://doi.org/10.1016/S0043-1648(98)00219-1
- Zhang, S. (1984), “Mechanisms of Rubber Abrasion in Unsteady State,” Rubber Chem. Technol., 57(4), pp 755–768.
- Lee, L. H. (1985), Polymer Wear and Its Control, American Chemical Society.
- Da Silva, R. C. L., Da Silva, C. H., and Medeiros, J. T. N. (2007), “Is There Delamination Wear in Polyurethane?,” Wear, 263(7–12), pp 974–983. doi:https://doi.org/10.1016/j.wear.2007.01.082
- Zhang, S. W. (2004), Tribology of Elastomers, Elsevier, 47, III-265.
- Chang, L., Zhang, Z., Ye, L., and Friedrich, K. (2007), “Tribological Properties of High Temperature Resistant Polymer Composites with Fine Particles,” Tribol. Inter., 40(7), pp 1170–1178.
- Chang, L., and Zhang, Z. (2006), “Tribological Properties of Epoxy Nanocomposites. Part II. A Combinative Effect of Short Carbon Fibre with Nano-TiO2,” Wear, 260(7–8), pp 869–878. doi:https://doi.org/10.1016/j.wear.2005.04.002
- Xiaoren, L. V., Chen, J., Wang, S., and Chenglong, H. U. (2016), “FEM Analysis on Sand Movement in Three-Body Wet Abrasive Wear of Nitrile Rubber,” Lubr. Eng., 041, pp 44–48.
- Schallamach, A. (1974), “Elementary Effects in the Contact Area of Sliding Rubber,” The Physics of Tire Traction, Springer, pp 167–178.
- Moore, D. F. (1980), “Friction and Wear in Rubbers and Tyres,” Wear, 61(2), pp 273–282. doi:https://doi.org/10.1016/0043-1648(80)90291-4
- Wen, S. Z., and Huang, P. (2012), Principles of Tribology, 4th ed., Tsinghua University Press, Beijing, China.