Study of the Lubricity of Oil Film at Constant Cutting Speed Under Different Loads of a Hydrostatic Turntable

References

• Yu, X. D., Sun, D. D., Wu, X. G., et al. (2016), “Numerical and Experimental Study on Temperature Field of Hydrostatic Bearing Friction Pair,” Journal of Propulsion Technology, 37(10), pp 1946–1951.
   Google Scholar
• Yu, X. D., Liu, C., Zuo, X., et al. (2018), “Thermal Mechanical Coupling Solution and Experiment of Deformation Flow of Hydrostatic Support Friction Pair,” Engineering Mechanics, 35(5), pp 231–238.
   Google Scholar
• Sharma, S. C., Jain, S. C., and Bharuka, D. K. (2002), “Influence of Recess Shape on the Performance of a Capillary Compensated Circular Thrust Pad Hydrostatic Bearing,” Tribology International, 35(6), pp 347–356. doi:10.1016/S0301-679X(02)00013-0
   Web of Science ®Google Scholar
• Alexandrina, U., and Gen, F. (2017), “Effect of Recess Shape on the Performance of a High-Speed Hybrid Journal Bearing,” ASME Journal of Tribology, 139(11), pp 112501–1:10.
   Google Scholar
• Shen, F., Chen, C. L., and Liu, Z. M. (2015), “PIV Measurements and Numerical Simulation for Flow Characteristics in Round Hydrostatic Oil Cavity,” Engineering Mechanics, 32(1), pp. 226–233.
   Google Scholar
• Johansen, P., Roemer, D. B., and Pedersen, H. C. (2014), “Andersen Torben. Analytical Thermal Field Theory Applicable to Oil Hydraulic Fluid Film Lubrication,” ASME/BATH 2014 Symposium on Fluid Power and Motion Control. doi:10.1115/FPMC2014-7844
   Google Scholar
• Lai, T. H., Chang, T. Y., Yang, Y. L., et al. (2017), “Parameters Design of a Membrane-Type Restrictor With Single-Pad Hydrostatic Bearing to Achieve High Static Stiffness,” Tribology International, 107, pp 206–212. doi:10.1016/j.triboint.2016.11.037
   Web of Science ®Google Scholar
• Bakker, O. J., et al. (2010), “Recess Depth Optimization for Rotating Annular and Circular Recess Hydrostatic Thrust Bearings,” Journal of Tribology, 132(1), pp 1–7. doi:10.1115/1.4000545
   Web of Science ®Google Scholar
• Liu, Z. Y., Ma, J. K., and Li, J. (2019), “Study on Characteristics of Oil Film Temperature Rise of the New Type Hybrid Differential Rotary Table,” Lubrication Engineering, 71(4).
   Google Scholar
• Bai, L., Meng, Y., and Zhang, V. (2016), “Experimental Study on Transient Behavior of Cavitation Phenomenon in Textured Thrust Bearings,” Tribology Letters, 63(2), pp 27. doi:10.1007/s11249-016-0715-6
   Web of Science ®Google Scholar
• Fu, G., and Untaroiu, A. (2018), “The Influence of Surface Patterning on the Thermal Properties of Textured Thrust Bearings,” Journal of Tribology, 140(6), p 061706. doi:10.1115/1.4040383
   Web of Science ®Google Scholar
• Wang, S. L., Xiong, W. L., Gui, L., et al. (2014), “Dynamic Mesh Method for Calculating Bearing Capacity and Overturning Moment of Partial Loaded Hydrostatic Rotary Tables Under Rotating Condition,” Journal of Mechanical Engineering, 50(23), pp 66–74. doi:10.3901/JME.2014.23.066
   Google Scholar
• Glavatskikh, S. B. (2000), “Transient Thermal Effects in a Pivoted Pad Thrust Bearing,” Tribology Series, 38, pp 229–240.
   Google Scholar
• Jia, C., Pang, H., Ma, W., et al. (2017), “Dynamic Stability Prediction of Spherical Spiral Groove Hybrid Gas Bearings Rotor System,” Journal of Tribology, 139(2), pp 1701–1712. doi:10.1115/1.4033453
   Web of Science ®Google Scholar
• Paranjpe, R. S., and Han, T. A. (1995), “Transient Thermohydrodynamic Analysis Including Mass Conserving Cavitation for Dynamically Loaded Journal Bearings,” International Journal of Multiphase Flow, 22(3), p 149. doi:10.1016/S0301-9322(97)88588-6
   Google Scholar
• Moon, S. M., et al. (2018), “Evaluation of Lubrication Performance of Crank Pin Bearing in a Marine Diesel Engine,” Friction, 6(4), pp 464–471. doi:10.1007/s40544-017-0196-0
   Web of Science ®Google Scholar
• Franssen, R. H. M., Potze, W., Jong, P. D. et al. (2017), “Large Amplitude Dynamic Behavior of Thrust Air Bearings: Modeling and Experiments,” Tribology International, 109, pp 460–466. doi:10.1016/j.triboint.2016.12.024
   Web of Science ®Google Scholar
• Han, Y. F., Chan, C. W., Wang, Z. J., et al. (2015), “Effects of Shaft Axial Motion and Misalignment on the Lubrication Performance of Journal Bearings Via a Fast Mixed EHL Computing Technology,” Tribology Transactions, 58(2), pp 247–259. doi:10.1080/10402004.2014.962207
   Web of Science ®Google Scholar
• Michalec, M., Svoboda, P., Krupka, I., et al. (2021), “A Review of the Design and Optimization of Large-Scale Hydrostatic Bearing Systems,” Engineering Science and Technology, an International Journal, 24, pp 936–958. doi:10.1016/j.jestch.2021.01.010
   Google Scholar
• Zhang, Y. Q., Zhang, Z. Q., and Feng, Y. N. (2018), “Oil Film Lubrication Characteristics of Double Rectangular Cavity Hydrostatic Sliding Bearing at High Speed,” Journal of Tribology, 38(5), pp 609–618.
   Google Scholar
• Zhang, Y. Q., Ni, S. Q., Zhang, Z. Q., et al. (2019), “Dynamic Lubrication Characteristics of Oil Film With Variable Viscosity Hydrostatic Sliding Bearings at High Speed,” Journal of Mechanical Engineering, 55(21), pp 108–117.
   Google Scholar
• Zhang, Y. Q., Sun, J. C., Kong, P. R., et al. (2019), “Research on the Oil Film Temperature Field of Hydrostatic Bearing With Variable Viscosity Dynamic Simulation and Experiment,” Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 233(11), pp 1763–1772. doi:10.1177/1350650119846002
   Web of Science ®Google Scholar
• Rowe, W. B., and O’Donoghue, J. P. (1980), Hydrostatic Pressure Bearing Principle and Design, National Defense Industry Press.
   Google Scholar